Multi-level single mode 2D polymer waveguide optical interconnects using nano-imprint lithography.

Single and multi-layer passive optical interconnects using single mode polymer waveguides are demonstrated using UV nano-imprint lithography. The fabrication tolerances associated with imprint lithography are investigated and we show a way to experimentally quantify a small variation in index contrast between core and cladding of fabricated devices. 1x2 splitting devices based on directional couplers and multimode interference interferometers are demonstrated to have less than 0.45 dB insertion loss with 0.02 ± 0.01 dB power imbalance between the outputs. We demonstrate an 'optical via' with an insertion loss less than 0.45 dB to transfer light from one optical signal plane to another. A 1x4 two-dimensional optical port is experimentally demonstrated to spatially split the input power with an insertion loss of 1.2 dB.

[1]  L. Tong,et al.  Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing , 2013, IEEE Photonics Technology Letters.

[2]  Brian Corbett,et al.  Optical coupling structure made by imprinting between single-mode polymer waveguide and embedded VCSEL , 2015, Photonics West - Optoelectronic Materials and Devices.

[3]  R. Myllylä,et al.  Fabrication of optical inverted-rib waveguides using UV-imprinting , 2011 .

[4]  Roger Dangel,et al.  Polymer waveguides for electro-optical integration in data centers and high-performance computers. , 2015, Optics express.

[5]  Brian Corbett,et al.  Design, fabrication and characterisation of nano-imprinted single mode waveguide structures for intra-chip optical communications , 2015, Photonics West - Optoelectronic Materials and Devices.

[6]  Min-Cheol Oh,et al.  Polymeric waveguide polarization splitter with a buried birefringent polymer , 1999 .

[7]  Markus Ortsiefer,et al.  Polymer-based optical interconnects using nanoimprint lithography , 2013, Photonics West - Optoelectronic Materials and Devices.

[8]  W. Ni,et al.  Layer-to-layer optical interconnect coupling by soft-lithographic stamping. , 2009, Optics express.

[9]  S. Imamura,et al.  Coupling ratio control of polymeric waveguide couplers by bending , 1992 .

[10]  J. Hiltunen,et al.  Fabrication of optical waveguides by imprinting: usage of positive tone resist as a mould for UV-curable polymer. , 2009, Optics express.

[11]  Jijun Feng,et al.  A Three-Dimensional Silicon Nitride Polarizing Beam Splitter , 2014, IEEE Photonics Technology Letters.

[12]  Mark Horowitz,et al.  High-speed electrical signaling: overview and limitations , 1998, IEEE Micro.

[13]  W. Kim,et al.  Fabrication of ridge waveguides by UV embossing and stamping of sol-gel hybrid materials , 2004 .

[14]  H. Lan,et al.  Chip-Level 1 $\times$ 2 Optical Interconnects Using Polymer Vertical Splitter on Silicon Substrate , 2014, IEEE Photonics Journal.

[15]  J. Hiltunen,et al.  UV-Imprinted Single-Mode Waveguides With Low Loss at Visible Wavelength , 2013, IEEE Photonics Technology Letters.

[16]  Mikko Karppinen,et al.  Multilayer single-mode polymeric waveguides by imprint patterning for optical interconnects , 2014, Photonics West - Optoelectronic Materials and Devices.

[17]  Michael T. Gale,et al.  Cost-effective fabrication of waveguides for PLCs by replication in UV-curable sol-gel material , 2004, SPIE Photonics Europe.

[18]  Ph. André,et al.  Organic–inorganic hybrid materials towards passive and active architectures for the next generation of optical networks , 2010 .

[19]  P. Dannberg,et al.  New wafer-scale fabrication method for stacked optical waveguide interconnects and 3D micro-optic structures using photoresponsive (inorganic–organic hybrid) polymers , 2003 .

[20]  J. Bowers,et al.  Multilayer Platform for Ultra-Low-Loss Waveguide Applications , 2012, IEEE Photonics Technology Letters.