X-ray Tomographic Method to Study the Internal Structure of a TiNi–TiB2 Metal Matrix Composite Obtained by Direct Laser Deposition

The field of additive manufacturing (AM) of various materials is rapidly developing. At the stage of designing and growing products and for the quality control of finished parts, non-destructive methods of analysis, in particular X-ray computed tomography (CT), are in demand. In addition to the advantages of non-destructive imaging of a wide range of materials in three dimensions, modern CT scanners offer a high contrast and high spatial resolution to provide digital information about their three-dimensional geometry and properties. Within the framework of this article, CT was used to follow the structural evolution of a TiNi–TiB2 metal–ceramic composite obtained by direct laser deposition. The relationship has been established between the additive method of production (layered direct laser deposition) and the formed layered structure of the product in the direction of growth. The porosity of the sample was calculated for each scan direction, and the average for the sample was 1.96%. The matrix of the TiNi–TiB2 composite is characterized by the presence of pores of various sizes, shapes and locations. Spherical voids prevail, but keyhole pores are also found. The heterogeneity of the structure was revealed in the form of clearly traced boundaries of the print layers, as well as differences in the density of the inner and outer regions of the composite.

[1]  A. du Plessis,et al.  An investigation into the porosity of extrusion-based 3D printed concrete , 2021 .

[2]  S. Babu,et al.  In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing , 2020, Metallurgical and Materials Transactions A.

[3]  A. du Plessis,et al.  Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure , 2020 .

[4]  Jay G. Sanjayan,et al.  Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance , 2020 .

[5]  J. Chevalier,et al.  X-ray tomography of additive-manufactured zirconia: Processing defects – Strength relations , 2020 .

[6]  R. Cioffi,et al.  Hybrid Fly Ash-Based Geopolymeric Foams: Microstructural, Thermal and Mechanical Properties , 2020, Materials.

[7]  A. du Plessis.  X‐ray tomography for the advancement of laser powder bed fusion additive manufacturing , 2020, Journal of microscopy.

[8]  A. du Plessis,et al.  Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights , 2020 .

[9]  H. Möller,et al.  Characterization of surface roughness and subsurface pores and their effect on corrosion in 3D-printed AlSilOMg , 2020 .

[10]  V. Promakhov,et al.  Modelling of the deformation and destruction of a TiNi-TiB2 metal-ceramic composite fabricated by direct laser deposition , 2019 .

[11]  A. Wilbers,et al.  Application of iterative reconstruction algorithms to mitigate CT-artefacts when measuring fiber reinforced polymer materials , 2019, Polymer.

[12]  G. Turichin,et al.  Inconel 625/TiB2 Metal Matrix Composites by Direct Laser Deposition , 2019, Metals.

[13]  Yusheng Shi,et al.  In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior , 2019, Powder Technology.

[14]  V. Promakhov,et al.  Mechanisms of mesoscopic fracture of TiNi-TiB2 metal-ceramic composite , 2019, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019.

[15]  C. Kenel,et al.  Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting , 2018, Acta Materialia.

[16]  M. Mackay,et al.  Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing , 2018 .

[17]  S. Lathabai.  Additive Manufacturing of Aluminium-Based Alloys and Composites , 2018 .

[18]  Yusheng Shi,et al.  Hot isostatic pressing of in-situ TiB/Ti-6Al-4V composites with novel reinforcement architecture, enhanced hardness and elevated tribological properties , 2017 .

[19]  A. Nzihou,et al.  The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties , 2017 .

[20]  J P Guillet,et al.  Terahertz imaging and tomography as efficient instruments for testing polymer additive manufacturing objects. , 2016, Applied optics.

[21]  Mohsen Seifi,et al.  Metal Additive Manufacturing: A Review of Mechanical Properties , 2016 .

[22]  M. Williams,et al.  3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography , 2016 .

[23]  Andrew M. Kiss,et al.  To get the most out of high resolution X-ray tomography: A review of the post-reconstruction analysis , 2016 .

[24]  R. Hague,et al.  Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography , 2016 .

[25]  M. Dubois,et al.  Improvement of wood polymer composite mechanical properties by direct fluorination , 2015 .

[26]  Veerle Cnudde,et al.  High-resolution X-ray computed tomography in geosciences: A review of the current technology and applications , 2013 .

[27]  Xianghui Xiao,et al.  Microstructure and mechanical properties of acicular mullite , 2013 .

[28]  D. Wildenschild,et al.  X-ray imaging and analysis techniques for quantifying pore-scale structure and processes in subsurface porous medium systems , 2013 .

[29]  C. Colin,et al.  As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2011 .

[30]  Xianghui Xiao,et al.  Damage evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography , 2010 .

[31]  V. Cnudde,et al.  Porosity and microstructure characterization of building stones and concretes , 2009 .

[32]  V. Cnudde,et al.  Software tools for quantification of X-ray microtomography at the UGCT , 2007 .

[33]  M. Stampanoni,et al.  3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT) , 2007 .

[34]  E. Maire,et al.  Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography , 2007 .

[35]  W. Carlson.  Three-dimensional imaging of earth and planetary materials , 2006 .

[36]  Henry Proudhon,et al.  Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography , 2006 .

[37]  P. Jacobs,et al.  Applications of X-ray computed tomography in the geosciences , 2003, Geological Society, London, Special Publications.