High-Efficiency Indoor Organic Photovoltaics with a Band-Aligned Interlayer

[1]  S. Biswas,et al.  Utilization of poly (4-styrenesulfonic acid) doped polyaniline as a hole transport layer of organic solar cell for indoor applications , 2020 .

[2]  Mario Leclerc,et al.  Recent Progress on Indoor Organic Photovoltaics: From Molecular Design to Production Scale , 2020, ACS Energy Letters.

[3]  H. Ade,et al.  Alkyl Chain Tuning of Small Molecule Acceptors for Efficient Organic Solar Cells , 2019 .

[4]  Fujun Zhang,et al.  Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator , 2019, Science China Chemistry.

[5]  B. Liu,et al.  A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency , 2019, Energy & Environmental Science.

[6]  T. Anthopoulos,et al.  17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS , 2019, Advanced materials.

[7]  Yong Cui,et al.  1 cm2 Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency , 2019, Advanced materials.

[8]  O. Inganäs,et al.  Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications , 2019, Nature Energy.

[9]  H. Meng,et al.  Boosting Efficiency and Stability of Organic Solar Cells Using Ultralow-Cost BiOCl Nanoplates as a Hole Transporting Layer. , 2019, ACS applied materials & interfaces.

[10]  Ruixiang Peng,et al.  16.67% Rigid and 14.06% Flexible Organic Solar Cells Enabled by Ternary Heterojunction Strategy , 2019, Advanced materials.

[11]  Wei Ma,et al.  Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology , 2019, Advanced Energy Materials.

[12]  Yong Cui,et al.  Improved Charge Transport and Reduced Nonradiative Energy Loss Enable Over 16% Efficiency in Ternary Polymer Solar Cells , 2019, Advanced materials.

[13]  F. Gao,et al.  Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages , 2019, Nature Communications.

[14]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[15]  Young-Jun You,et al.  Highly Efficient Indoor Organic Photovoltaics with Spectrally Matched Fluorinated Phenylene‐Alkoxybenzothiadiazole‐Based Wide Bandgap Polymers , 2019, Advanced Functional Materials.

[16]  Minwoo Nam,et al.  Quaternary indoor organic photovoltaic device demonstrating panchromatic absorption and power conversion efficiency of 10% , 2019, Dyes and Pigments.

[17]  Wenkai Zhong,et al.  Achieving over 16% efficiency for single-junction organic solar cells , 2019, Science China Chemistry.

[18]  Takuma Yasuda,et al.  High-Performance Organic Energy-Harvesting Devices and Modules for Self-Sustainable Power Generation under Ambient Indoor Lighting Environments. , 2019, ACS Applied Materials and Interfaces.

[19]  Ian Marius Peters,et al.  Technology and Market Perspective for Indoor Photovoltaic Cells , 2019, Joule.

[20]  H. Ade,et al.  Donor polymer based on alkylthiophene side chains for efficient non-fullerene organic solar cells: insights into fluorination and side chain effects on polymer aggregation and blend morphology , 2018 .

[21]  Jianguo Wang,et al.  Side-chain effect of perylene diimide tetramer-based non-fullerene acceptors for improving the performance of organic solar cells , 2018 .

[22]  Hui Li,et al.  A broad-spectral-response perovskite photodetector with a high on/off ratio and high detectivity , 2018 .

[23]  H. Ade,et al.  Carboxylate substitution position influencing polymer properties and enabling non-fullerene organic solar cells with high open circuit voltage and low voltage loss , 2018, Journal of Materials Chemistry A.

[24]  F. Gao,et al.  A minimal non-radiative recombination loss for efficient non-fullerene all-small-molecule organic solar cells with a low energy loss of 0.54 eV and high open-circuit voltage of 1.15 V , 2018 .

[25]  S. Zakeeruddin,et al.  Direct Contact of Selective Charge Extraction Layers Enables High-Efficiency Molecular Photovoltaics , 2018, Joule.

[26]  Hang Yin,et al.  Designing a ternary photovoltaic cell for indoor light harvesting with a power conversion efficiency exceeding 20 , 2018 .

[27]  Zhe Li,et al.  Organic photovoltaic cells – promising indoor light harvesters for self-sustainable electronics , 2018 .

[28]  Abdullah M. Asiri,et al.  Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer , 2018, Advanced science.

[29]  H. Ade,et al.  Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method , 2018 .

[30]  F. Liu,et al.  Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54% , 2018, Advanced materials.

[31]  Yongfang Li,et al.  Simultaneously Achieved High Open‐Circuit Voltage and Efficient Charge Generation by Fine‐Tuning Charge‐Transfer Driving Force in Nonfullerene Polymer Solar Cells , 2018 .

[32]  Ganesh D. Sharma,et al.  Toward High‐Performance Polymer Photovoltaic Devices for Low‐Power Indoor Applications , 2017 .

[33]  H. Ade,et al.  Ring-Fusion of Perylene Diimide Acceptor Enabling Efficient Nonfullerene Organic Solar Cells with a Small Voltage Loss. , 2017, Journal of the American Chemical Society.

[34]  Yoichi Aoki,et al.  Photovoltaic performance of Organic Photovoltaics for indoor energy harvester , 2017 .

[35]  Peiyang Gu,et al.  PDI Derivative through Fine-Tuning the Molecular Structure for Fullerene-Free Organic Solar Cells. , 2017, ACS applied materials & interfaces.

[36]  W. Ma,et al.  Tuning Energy Levels without Negatively Affecting Morphology: A Promising Approach to Achieving Optimal Energetic Match and Efficient Nonfullerene Polymer Solar Cells , 2017 .

[37]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[38]  G. Cao,et al.  Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film , 2017 .

[39]  M. Freitag,et al.  Dye-sensitized solar cells for efficient power generation under ambient lighting , 2017, Nature Photonics.

[40]  H. Ade,et al.  Efficient Charge Transfer and Fine‐Tuned Energy Level Alignment in a THF‐Processed Fullerene‐Free Organic Solar Cell with 11.3% Efficiency , 2017, Advanced materials.

[41]  Ke Gao,et al.  Solution-processed organic tandem solar cells with power conversion efficiencies >12% , 2016, Nature Photonics.

[42]  Yongsong Luo,et al.  Energetic disorder induced leakage current in organic bulk heterojunction solar cells: comprehending the ultra-high open circuit voltage loss at low temperatures , 2016, 1611.04287.

[43]  D. Venkataraman,et al.  Indoor light recycling: a new home for organic photovoltaics , 2016 .

[44]  Partha Pratim Ray,et al.  A survey on Internet of Things architectures , 2016, J. King Saud Univ. Comput. Inf. Sci..

[45]  A. Savva,et al.  Improved Performance and Reliability of p‐i‐n Perovskite Solar Cells via Doped Metal Oxides , 2016, 1610.01776.

[46]  James W. Evans,et al.  Organic solar cells and fully printed super-capacitors optimized for indoor light energy harvesting , 2016 .

[47]  D. Blaauw,et al.  Energy Harvesting for GaAs Photovoltaics Under Low-Flux Indoor Lighting Conditions , 2016, IEEE Transactions on Electron Devices.

[48]  H. Ade,et al.  Fast charge separation in a non-fullerene organic solar cell with a small driving force , 2016, Nature Energy.

[49]  Harrison Ka Hin Lee,et al.  Is organic photovoltaics promising for indoor applications , 2016 .

[50]  J. Yao,et al.  High-Efficiency Nonfullerene Polymer Solar Cell Enabling by Integration of Film-Morphology Optimization, Donor Selection, and Interfacial Engineering. , 2016, ACS applied materials & interfaces.

[51]  I. Oh,et al.  Reduced leakage current and improved performance of an organic photodetector using an ytterbium cathode interlayer , 2016 .

[52]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[53]  Masahiro Hosoya,et al.  Investigation of the organic solar cell characteristics for indoor LED light applications , 2015 .

[54]  P. Heremans,et al.  Energy Level Tuning of Non-Fullerene Acceptors in Organic Solar Cells , 2015, Journal of the American Chemical Society.

[55]  S. Jenekhe,et al.  Fine‐Tuning the 3D Structure of Nonfullerene Electron Acceptors Toward High‐Performance Polymer Solar Cells , 2015, Advanced materials.

[56]  Christopher M. Proctor,et al.  Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells , 2015 .

[57]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[58]  Wei Jiang,et al.  Integrated Molecular, Interfacial, and Device Engineering towards High‐Performance Non‐Fullerene Based Organic Solar Cells , 2014, Advanced materials.

[59]  Boyuan Qi,et al.  Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells , 2014 .

[60]  Hongbin Wu,et al.  Interface investigation of the alcohol-/water-soluble conjugated polymer PFN as cathode interfacial layer in organic solar cells , 2013 .

[61]  W. Shin,et al.  Enhanced performance in inverted polymer solar cells with D-π-A-type molecular dye incorporated on ZnO buffer layer. , 2013, ChemSusChem.

[62]  J. Nelson,et al.  On the Differences between Dark and Light Ideality Factor in Polymer:Fullerene Solar Cells , 2013 .

[63]  Marimuthu Palaniswami,et al.  Internet of Things (IoT): A vision, architectural elements, and future directions , 2012, Future Gener. Comput. Syst..

[64]  Yongfang Li,et al.  A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V. , 2012, Chemical communications.

[65]  Christoph J. Brabec,et al.  Organic photovoltaics for low light applications , 2011 .

[66]  Hongbin Wu,et al.  Largely Enhanced Efficiency with a PFN/Al Bilayer Cathode in High Efficiency Bulk Heterojunction Photovoltaic Cells with a Low Bandgap Polycarbazole Donor , 2011, Advanced materials.

[67]  Wim Turkenburg,et al.  Charge yield potential of indoor-operated solar cells incorporated into Product Integrated Photovoltaic (PIPV) , 2011 .

[68]  Yong Cao,et al.  Bulk-Heterojunction Solar Cells with Benzotriazole-Based Copolymers as Electron Donors: Largely Improved Photovoltaic Parameters by Using PFN/Al Bilayer Cathode , 2010 .

[69]  Stephen R. Forrest,et al.  Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells , 2009 .

[70]  Thuc-Quyen Nguyen,et al.  Electronic properties of conjugated polyelectrolyte thin films. , 2008, Journal of the American Chemical Society.

[71]  Valentin D. Mihailetchi,et al.  Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells , 2005 .

[72]  R. Friend,et al.  Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells , 2018, Advanced materials.

[73]  L. Reindl,et al.  Maximum efficiencies of indoor photovoltaic devices , 2013, IEEE Journal of Photovoltaics.

[74]  Jinsong Huang,et al.  Fluorine substituted thiophene-quinoxaline copolymer to reduce the HOMO level and increase the dielectric constant for high open-circuit voltage organic solar cells† , 2013 .