Determination of contact pattern for double enveloping worm gear

Abstract The paper presents the method of determining geometric contact pattern by using the direct computer-aided design (CAD) method for ideal globoid worm gear in which mounting deviations are considered. The tooth contact analysis was performed for all cycle of worm rotation. Based on the results of temporary contact pattern, graphical characteristics of the contact area size depending on worm position were made. A complete analysis of the correctness of gear meshing can be obtained based on presented method. If the worm or worm wheel is incorrectly designed in terms of the geometry, the meshing simulation of CAD models can indicate the collision. Geometric contact pattern analyses were made at two pressure angles of ideal gear. The analysis of the influence of mounting deviations was done against one selected pressure angle and one gear position.

[1]  M. Oleksy,et al.  Application of polymeric materials for obtaining gears with involute and sinusoidal profile , 2020 .

[2]  L Dudás,et al.  New technology for manufacturing quasi-globoid worm gearings , 2018, IOP Conference Series: Materials Science and Engineering.

[3]  Stanislaw Legutko,et al.  Measurement and mathematical model of convexo-concave Novikov gear mesh , 2018, Measurement.

[4]  Wenjun Luo,et al.  Study on the spur involute gear meshing with planar enveloping hourglass worm based on local conjugate , 2018 .

[5]  Shaojun Wang,et al.  Digitization modeling and CNC machining for cone-generated double-enveloping worm drive , 2018 .

[6]  M. Sobolak,et al.  Mathematical description of tooth flank surface of globoidal worm gear with straight axial tooth profile , 2017 .

[7]  A L Kheyfets,et al.  Programming While Construction of Engineering 3D Models of Complex Geometry , 2017 .

[8]  Yi-min Zhang,et al.  Computing method for induced curvature parameters based on normal vector of instantaneous contact line and its application to Hindley worm pair , 2017 .

[9]  Yaping Zhao,et al.  Compound modification of globoidal worm drive with variable parameters , 2017 .

[10]  Shaojun Wang,et al.  A novel CNC machining method for enveloping surface , 2016 .

[11]  P. Połowniak,et al.  Wpływ skrajnej krawędzi frezu ślimakowego na kształtowanie boku zęba ślimacznicy , 2016 .

[12]  Yi-min Zhang,et al.  Novel methods for curvature analysis and their application to TA worm , 2016 .

[13]  Zhang Guanghui,et al.  Development and Classification of Worm Drive , 2015 .

[14]  A. V. Sutyagin,et al.  More efficient machining of globoid worm gears , 2015 .

[15]  Piotr Połowniak,et al.  Modeling of globoid wormwheel in CAD systems , 2015 .

[16]  M. S. Shunmugam,et al.  Geometrical aspects of double enveloping worm gear drive , 2009 .

[17]  Chung-Biau Tsay,et al.  Mathematical model and worm wheel tooth working surfaces of the ZN-type hourglass worm gear set , 2009 .

[18]  Illés Dudás,et al.  The Theory and Practice of Worm Gear Drives , 2000 .

[19]  Faydor L. Litvin,et al.  Development of Gear Technology and Theory of Gearing. , 1997 .

[20]  V. Simon.  New type of ground double enveloping worm gear drive , 1989 .

[21]  Yaping Zhao,et al.  Variable height modification of TA worm drive , 2019 .

[22]  Zhaoyao Shi,et al.  Effects of tooth surface modification on planar double-enveloping hourglass worm gear drives , 2018 .

[23]  A. L. Kheifetc.  Geometrically Accurate Computer 3D Models of Gear Drives and Hob Cutters , 2016 .

[24]  Piotr Połowniak,et al.  Modeling a globoid worm in CAD environment , 2015 .

[25]  William P. Crosher.  Design and application of the worm gear , 2002 .