A Low-g 3 Axis Accelerometer for Emerging Automotive Applications

A 30 µg/sqrt(Hz) resolution MEMS based low-g 3-axis accelerometers targeted for emerging automotive application is presented. The device is composed by 2-dice in a single package: the sensing element and the processing IC. The sensing element is realized with an epitaxial micro-machining process (ThELMA™) while the IC uses a 0.5 μm BICMOS process. The IC amplifier is able to detect capacitive changes as low as 10 aF (10·10−18 F) and the device is able to provide both an analog and a digital output. Moreover it has very good linearity and very low cross talk between the sensing axes thanks to a design that fits very well the ST micro-machining process ThELMA. Finally, the proposed interface accelerometer is factory-trimmed to ensure repeatable performance without production-line adjustments in the end product

[1]  T. A. Core,et al.  A low cost monolithic accelerometer , 1992, 1992 Symposium on VLSI Circuits Digest of Technical Papers.

[2]  Matthias Koch,et al.  Packaging of Micro Devices for Automotive Applications - Techniques and Examples , 2003 .

[3]  P. Gray,et al.  High-frequency CMOS switched-capacitor filters for communications application , 1983 .

[4]  Roger T. Howe,et al.  Surface micromachined, digitally force-balanced accelerometer with integrated CMOS detection circuitry , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[5]  B. Boser,et al.  A monolithic surface micromachined accelerometer with digital output , 1995 .

[6]  Roger T. Howe,et al.  Surface micromachined accelerometers , 1996 .

[7]  H. Jerman,et al.  Wide dynamic range direct accelerometer , 1990, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop.

[8]  Helmut Seidel,et al.  A Low-g Accelerometer for Inertial Measurement Units , 2003 .

[9]  L. Spangler,et al.  An accelerometer interface circuit , 1995, Proceedings of the IEEE 1995 Custom Integrated Circuits Conference.

[10]  Ernst Obermeier,et al.  Processes for the Fabrication of Three Dimensional MEMS Structures , 2003 .

[11]  T. Gabrielson.  Mechanical-thermal noise in micromachined acoustic and vibration sensors , 1993 .

[12]  Anthony Lawrence,et al.  Modern Inertial Technology , 1993 .

[13]  L. Ristić,et al.  Surface micromachined polysilicon accelerometer , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[14]  Paul R. Gray,et al.  A 10 b, 20 Msample/s, 35 mW pipeline A/D converter , 1995, IEEE J. Solid State Circuits.

[15]  Augusto Garcia-Valenzuela,et al.  Comparative study of piezoelectric, piezoresistive, electrostatic, magnetic, and optical sensors , 1994, Optics & Photonics.

[16]  P. Hauptmann.  Sensors: A Comprehensive Survey , 1996 .

[17]  Paul J. McWhorter,et al.  Embedded micromechanical devices for the monolithic integration of MEMS with CMOS , 1995, Proceedings of International Electron Devices Meeting.

[18]  R. S. Payne,et al.  A low cost monolithic accelerometer; product/technology update , 1992, 1992 International Technical Digest on Electron Devices Meeting.