Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.

[1]  W. Weingaertner,et al.  Glossiness distribution over the surface of stoneware floor tiles due to the polishing process , 2007 .

[2]  K. Görgülü,et al.  Evaluation of continuous grinding tests on some marble and limestone units with silicon carbide and diamond type abrasives , 2008 .

[3]  M. Montoto,et al.  Acoustic emission monitoring to study sodium sulphate crystallization in monumental porous carbonate stones , 1997 .

[4]  C. Price.  An expert chemical model for determining the environmental conditions needed to prevent salt damage in porous materials : protection and conservation of the European cultural heritage , 2000 .

[5]  Francisco J. García Alonso,et al.  Soiling of building stones in urban environments , 2003 .

[6]  M. Kunaver,et al.  Surface analysis of matt powder coatings , 2007 .

[7]  M. Erdoğan.  Measurement of polished rock surface brightness by image analysis method , 2000 .

[8]  R. M. Esbert,et al.  Durabilidad de granitos ornamentales: valoración de los daños inducidos por el ensayo de cristalización de sales Ornamental granite durability: evaluation of damage caused by salt crystallization test , 2008 .

[9]  C. Appelo,et al.  Geochemistry, groundwater and pollution , 1993 .

[10]  R. Esbert,et al.  Las sales solubles en el deterioro de rocas monumentales. Revisión bibliográfica , 1994 .

[11]  Robert J. Flatt,et al.  Salt damage in porous materials: how high supersaturations are generated , 2002 .

[12]  C. Rodriguez-Navarro,et al.  Salt weathering: influence of evaporation rate, supersaturation and crystallization pattern , 1999 .

[13]  G. Scherer,et al.  Nucleation of sodium sulfate heptahydrate on mineral substrates studied by nuclear magnetic resonance , 2012 .

[14]  M. K. Gökay,et al.  Color identification of some Turkish marbles , 2008 .

[15]  Francisco M. Martínez-Verdú,et al.  Influence of Surface Roughness on Color Changes in Building Stones , 2003 .

[16]  R. M. Esbert,et al.  Influence of measuring conditions on roughness parameters of ornamental rocks , 2007 .

[17]  A. Arnold,et al.  Crystallization and habits of salt efflorescences on walls. II. Conditions of crystallization , 1985 .

[18]  Peter Brimblecombe,et al.  Aesthetics of simulated soiling patterns on architecture. , 2004, Environmental science & technology.

[19]  C. Selwitz,et al.  The evaluation of crystallization modifiers for controlling salt damage to limestone , 2002 .

[20]  T. Kinsella.  Surface analysis. , 2006, Medical device technology.

[21]  E. Winkler,et al.  Crystallization Pressure of Salts in Stone and Concrete , 1972 .

[22]  S. Siegesmund,et al.  Weathering of Fruchtschiefer building stones: mineral dissolution or rock disaggregation? , 2011 .

[23]  T. Fletcher.  A simple model to describe relationships between gloss behaviour, matting agent concentration and the rheology of matted paints and coatings , 2002 .

[24]  Robert J. Flatt,et al.  Crystallization damage by sodium sulfate , 2003 .

[25]  R. Ribeiro,et al.  Relationship between technological properties and slab surface roughness of siliceous dimension stones , 2008 .

[26]  F. Mango,et al.  High-sensitivity apparatus for measuring linear thermal expansion: Preliminary results on the response of marbles to thermal cycles , 1993 .

[27]  Olivier Coussy,et al.  Deformation and stress from in-pore drying-induced crystallization of salt , 2006 .

[28]  A. Streckeisen.  To each plutonic rock its proper name , 1976 .

[29]  Carlota M. Grossi,et al.  Effect of laser cleaning on granite color , 2007 .

[30]  Eric Doehne,et al.  How does sodium sulfate crystallize? Implications for the decay and testing of building materials , 2000 .

[31]  David Benavente,et al.  Weathering of limestone building material by mixed sulfate solutions. Characterization of stone microstructure, reaction products and decay forms , 2008 .

[32]  Bernard J. Smith,et al.  Micro-environmental change as a trigger for granite decay in offshore Irish lighthouses: implications for the long-term preservation of operational historic buildings , 2011 .

[33]  S. Siegesmund,et al.  Urban and rural limestone weathering; the contribution of dust to black crust formation , 2011 .

[34]  Xipeng Xu,et al.  Micro-structure detection of a glossy granite surface machined by the grinding process , 2002 .

[35]  Michael Steiger,et al.  Crystallization of sodium sulfate phases in porous materials: The phase diagram Na2SO4–H2O and the generation of stress , 2008 .

[36]  M. J. Varas-Muriel,et al.  Artificial weathering of Spanish granites subjected to salt crystallization tests: Surface roughness , 2010 .

[37]  M. Toivakka,et al.  Detection of local specular gloss and surface roughness from black prints , 2007 .