Oxygen vacancies lead to loss of domain order, particle fracture, and rapid capacity fade in lithium manganospinel (LiMn₂O₄) batteries.

Spinel-structured lithium manganese oxide (LiMn2O4) has attracted much attention because of its high energy density, low cost, and environmental impact. In this article, structural analysis methods such as powder neutron diffraction (PND), X-ray diffraction (XRD), and high-resolution transmission and scanning electron microscopies (TEM & SEM) reveal the capacity fading mechanism of LiMn2O4 as it relates to the mechanical degradation of the material. Micro-fractures form after the first charge (to 4.45 V vs. Li(+/0)) of a commercial lithium manganese oxide phase, best represented by the formula LiMn2O3.88. Diffraction methods show that the grain size decreases and multiple phases form after 850 electrochemical cycles at 0.2 C current. The microfractures are directly observed through microscopy studies as particle cracks propagate along the (1 1 1) planes, with clear lattice twisting observed along this direction. Long-term galvanostatic cycling results in increased charge-transfer resistance and capacity loss. Upon preparing samples with controlled oxygen contents, LiMn2O4.03 and LiMn2O3.87, the mechanical failure of the lithium manganese oxide can be correlated to the oxygen vacancies in the materials, providing guidance for better synthesis methods.

[1]  J. Goodenough,et al.  SOLID-STATE SCIENCE AND TECHNOLOGY Characterization of Sr-Doped LaMnO 3 and LaCoO 3 as Cathode Materials for a Doped LaGaO 3 Ceramic Fuel Cell , 2014 .

[2]  Yoshifumi Oshima,et al.  In Situ TEM Observation of Local Phase Transformation in a Rechargeable LiMn2O4 Nanowire Battery , 2013 .

[3]  Yang Liu,et al.  Nanovoid formation and annihilation in gallium nanodroplets under lithiation-delithiation cycling. , 2013, Nano letters.

[4]  Zhigang Suo,et al.  Measurements of the fracture energy of lithiated silicon electrodes of Li-ion batteries. , 2013, Nano letters.

[5]  Yi Cui,et al.  25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion Batteries , 2013, Advanced materials.

[6]  Wei Li,et al.  Factors influencing the electrochemical properties of high-voltage spinel cathodes: Relative impact of morphology and cation ordering , 2013 .

[7]  Jun Liu,et al.  Critical silicon-anode size for averting lithiation-induced mechanical failure of lithium-ion batteries , 2013 .

[8]  Y. K. Chen-Wiegart,et al.  3D analysis of a LiCoO2–Li(Ni1/3Mn1/3Co1/3)O2 Li-ion battery positive electrode using x-ray nano-tomography , 2013 .

[9]  Kristin A. Persson,et al.  Surface structure and equilibrium particle shape of the LiMn2O4 spinel from first-principles calculations , 2013 .

[10]  J. Bernard,et al.  A Simplified Electrochemical and Thermal Aging Model of LiFePO4-Graphite Li-ion Batteries: Power and Capacity Fade Simulations , 2013 .

[11]  A. Karim,et al.  Surface structure and equilibrium particle shape of the LiMn_{2}O_{4} spinel from first-principles calculations , 2013 .

[12]  E. Pradaa,et al.  A Simplified Electrochemical and Thermal Aging Model of LiFePO 4-Graphite Li-ion Batteries : Power and Capacity Fade Simulations , 2013 .

[13]  J. Choi,et al.  A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries. , 2012, Nano letters.

[14]  W. Craig Carter,et al.  Design criteria for electrochemical shock resistant battery electrodes , 2012 .

[15]  Ann Marie Sastry,et al.  Fracture Analysis of the Cathode in Li-Ion Batteries: A Simulation Study , 2012 .

[16]  B. J. Liddle,et al.  Improved electrode kinetics in lithium manganospinel nanoparticles synthesized by hydrothermal methods: identifying and eliminating oxygen vacancies , 2012 .

[17]  Jian Yu Huang,et al.  Size-dependent fracture of silicon nanoparticles during lithiation. , 2011, ACS nano.

[18]  Anton Van der Ven,et al.  Chemically Induced Crack Instability When Electrodes Fracture , 2012 .

[19]  Ahmet T. Alpas,et al.  A transmission electron microscopy study of crack formation and propagation in electrochemically cycled graphite electrode in lithium-ion cells , 2011 .

[20]  Stephen J. Harris,et al.  Measurement of three-dimensional microstructure in a LiCoO2 positive electrode , 2011 .

[21]  Myounggu Park,et al.  Generation of Realistic Particle Structures and Simulations of Internal Stress: A Numerical/AFM Study of LiMn2O4 Particles , 2010 .

[22]  Jaephil Cho,et al.  Effect of LiCoO2 Cathode Nanoparticle Size on High Rate Performance for Li-Ion Batteries , 2009 .

[23]  M. Wagemaker,et al.  Large impact of particle size on insertion reactions. A case for anatase Li(x)TiO2. , 2007, Journal of the American Chemical Society.

[24]  J. Newman,et al.  A mathematical model of stress generation and fracture in lithium manganese oxide , 2006 .

[25]  D. Aurbach,et al.  Electrochemical behavior of electrodes comprising micro- and nano-sized particles of LiNi0.5Mn1.5O4 : A comparative study , 2005 .

[26]  J. P. Dempsey,et al.  Stable crack growth in nanostructured Li-batteries , 2005 .

[27]  Xiaodong Wu,et al.  Cracking causing cyclic instability of LiFePO4 cathode material , 2005 .

[28]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[29]  J. Prakash,et al.  Phase Transitions in Li1 − δ Ni0.5Mn1.5 O 4 during Cycling at 5 V , 2004 .

[30]  A. Yamada,et al.  Synthesis, structure, and phase relationship in lithium manganese oxide spinel , 2004 .

[31]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[32]  J. Tarascon,et al.  On the origin of the 3.3 and 4.5 V steps observed in LiMn{sub 2}O{sub 4}-based spinels , 2000 .

[33]  Y. Chiang,et al.  Electron microscopic characterization of electrochemically cycled LiCoO2 and Li(Al, Co) O2 battery cathodes , 1999 .

[34]  Young-Il Jang,et al.  TEM Study of Electrochemical Cycling‐Induced Damage and Disorder in LiCoO2 Cathodes for Rechargeable Lithium Batteries , 1999 .

[35]  I. Uchida,et al.  In Situ Observation of LiNiO2 Single‐Particle Fracture during Li ‐ Ion Extraction and Insertion , 1999 .

[36]  D. Aurbach,et al.  On the electroanalytical characterization of Li{sub x}CoO{sub 2}, Li{sub x}NiO{sub 2} and LiMn{sub 2}O{sub 4} (spinel) electrodes in repeated lithium intercalation-deintercalation processes , 1998 .

[37]  Y. Matsui,et al.  Structural phase transition of the spinel-type oxide LiMn2O4 , 1998 .

[38]  S. Mukerjee,et al.  Structural evolution of Li{sub x}Mn{sub 2}O{sub 4} in lithium-ion battery cells measured in situ using synchrotron X-ray diffraction techniques , 1998 .

[39]  T. Ohzuku,et al.  Monitoring of Particle Fracture by Acoustic Emission during Charge and Discharge of Li / MnO2 Cells , 1997 .

[40]  J. Dahn,et al.  Synthesis and Electrochemistry of LiNixMn2-xO4. , 1997 .

[41]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[42]  D. Aurbach,et al.  On the Electroanalytical Characterization of Li x CoO 2 , Li x NiO 2 and LiMn 2 O 4 (Spinel) Electrodes in Repeated Lithium Intercalation-Deintercalation Processes , 1997 .

[43]  J. Dahn,et al.  Synthesis and Electrochemistry of LiNi x Mn2 − x O 4 , 1997 .

[44]  J. Goodenough,et al.  Characterization of Sr‐Doped LaMnO3 and LaCoO3 as Cathode Materials for a Doped LaGaO3 Ceramic Fuel Cell , 1996 .

[45]  Xiaofang Yang,et al.  Synchrotron x‐ray diffraction studies of the structural properties of electrode materials in operating battery cells , 1996 .

[46]  Lisa C. Klein,et al.  Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteries , 1996 .

[47]  A. Yamada,et al.  Jahn-Teller structural phase transition around 280K in LiMn2O4 , 1995 .

[48]  T. Ohzuku,et al.  Electrochemistry and Structural Chemistry of LiNiO2 (R3̅m) for 4 Volt Secondary Lithium Cells , 1993 .

[49]  Rachid Yazami,et al.  A reversible graphite-lithium negative electrode for electrochemical generators , 1983 .

[50]  J. C. Hunter.  Preparation of a new crystal form of manganese dioxide: λ-MnO2 , 1981 .

[51]  John B. Goodenough,et al.  LixCoO2 (0, 1981 .

[52]  John B. Goodenough,et al.  LixCoO2 (0, 1980 .