Experimental investigation and comparative study between machining of CFRP composite and CNT-mixed CFRP composite using ECDM process

[1]  Deyuan Zhang,et al.  An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures , 2022, Journal of Materials Research and Technology.

[2]  Manpreet Singh,et al.  Multi Response Optimization of ECDM Process for Generating Micro Holes in CFRP Composite Using TOPSIS Methodology , 2022, Polymers.

[3]  Yonggang Jiang,et al.  Ironing effect on surface integrity and fatigue behavior during ultrasonic peening drilling of Ti-6Al-4 V , 2022, Chinese Journal of Aeronautics.

[4]  S. Yadav,et al.  Investigation of machining characteristics during micro-hole fabrication in CFRP composite by ECDM process , 2022, Engineering Research Express.

[5]  Vivek Sharma,et al.  Finite element modeling of quartz material for analyzing material removal rate in ECDM process , 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

[6]  J. Jain,et al.  Implementation of tool and electrolyte-based development in the ultrasonic-assisted ECDM process: a review , 2022, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[7]  J. Katiyar,et al.  Exemplary approach using tool rotation-assisted µ-ECDM for CFRP composites machining , 2022, Materials and Manufacturing Processes.

[8]  Yuhong Zhang,et al.  Control and utilization of range-dependent beampattern with waveform diverse array radars , 2022, Chinese Journal of Aeronautics.

[9]  R. Manu,et al.  Grinding aided electrochemical discharge drilling (G-ECDD): A theoretical analysis and mathematical modelling of material removal rate , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[10]  K. V. Rao,et al.  An Optimization Strategy to Improve Performance in Electrochemical Discharge Machining of Borosilicate Glass Using Graph Theory Algorithm and Desirability Index , 2021, Silicon.

[11]  J. de Oliveira Gomes,et al.  Evaluation of carbon fiber reinforced polymer – CFRP – machining by applying industrial robots , 2021 .

[12]  A. Dvivedi,et al.  On controlling of gas film shape in electrochemical discharge machining process for fabrication of elliptical holes , 2020, Materials and Manufacturing Processes.

[13]  Manpreet Singh,et al.  Investigating the impact of LASER assistance on the accuracy of micro-holes generated in carbon fiber reinforced polymer composite by electrochemical discharge machining , 2020 .

[14]  A. Manna,et al.  Experimental Investigation During Electrochemical Discharge Machining (ECDM) of Hybrid Polymer Matrix Composites , 2020, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.

[15]  Pradeep Kumar,et al.  On near-dry wire ECDM of Al6063/SiC/10p MMC , 2020 .

[16]  R. Verma,et al.  Machining performance optimization in drilling of multiwall carbon nano tube/epoxy nanocomposites using GRA-PCA hybrid approach , 2020, Measurement.

[17]  K. Singh,et al.  Experimental investigation and optimization of abrasive water jet machining parameter on multi-walled carbon nanotube doped epoxy/carbon laminate , 2020, Measurement.

[18]  A. Dvivedi,et al.  Experimental investigations into rotary mode electrochemical discharge drilling (RM-ECDD) of metal matrix composites , 2020, Machining Science and Technology.

[19]  Manpreet Singh,et al.  Experimental Investigation for Generation of Micro-Holes on Silicon Wafer Using Electrochemical Discharge Machining Process , 2019, Silicon.

[20]  Dhiraj Kumar,et al.  Investigation of delamination and surface quality of machined holes in drilling of multiwalled carbon nanotube doped epoxy/carbon fiber reinforced polymer nanocomposite , 2019 .

[21]  Parvesh Antil.  Modelling and Multi-Objective Optimization during ECDM of Silicon Carbide Reinforced Epoxy Composites , 2019, Silicon.

[22]  R. Manu,et al.  Performance evaluation and multi-response optimization of grinding-aided electrochemical discharge drilling (G-ECDD) of borosilicate glass , 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[23]  Manpreet Singh,et al.  Electrochemical discharge machining: A review on preceding and perspective research , 2018, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

[24]  Jiangwen Liu,et al.  An analysis of the tool electrode working mechanism of grinding-aided electrochemical discharge machining of MMCs , 2018, The International Journal of Advanced Manufacturing Technology.

[25]  R. Manu,et al.  Machining of fluidic channels on borosilicate glass using grinding-aided electrochemical discharge engraving (G-ECDE) and process optimization , 2018 .

[26]  Alakesh Manna,et al.  Investigation on the laser-assisted jet electrochemical machining process for improvement in machining performance , 2018 .

[27]  A. Manna,et al.  Electrochemical Discharge Drilling of SiC Reinforced Polymer Matrix Composite Using Taguchi’s Grey Relational Analysis , 2018 .

[28]  M. D. Manshadi,et al.  Optimizing a Two-Element Wing Model with Morphing Flap by Means of the Response Surface Method , 2017 .

[29]  A. Ravi Sankar,et al.  Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process , 2017 .

[30]  M. B. Givi,et al.  Enhanced mechanical properties of multifunctional multiscale glass/carbon/epoxy composite reinforced with carbon nanotubes and simultaneous carbon nanotubes/nanoclays: , 2017 .

[31]  M. Razfar,et al.  An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass , 2016 .

[32]  Pradeep Kumar,et al.  Effect of Pulse Duration on Quality Characteristics of Blind Hole Drilled in Glass by ECDM , 2016 .

[33]  V. Shanov,et al.  Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking , 2016, Materials.

[34]  Dhiraj Kumar,et al.  An approach towards damage free machining of CFRP and GFRP composite material: a review , 2015 .

[35]  S. Kalidass,et al.  Prediction of Surface Roughness for AISI 304 Steel with Solid Carbide Tools in End Milling Process Using Regression and ANN Models , 2014 .

[36]  A. Asgarshamsi,et al.  Multi-point Optimization of Lean and Sweep Angles for Stator and Rotor Blades of an Axial Turbine , 2014 .

[37]  Abishek B. Kamaraj,et al.  High aspect ratio micromachining of glass by electrochemical discharge machining (ECDM) , 2013 .

[38]  P. Hariharan,et al.  A study on monitoring the drilling of polymeric nanocomposite laminates using acoustic emission , 2013 .

[39]  V. S. Gadakh,et al.  PARAMETRIC OPTIMIZATION OF WIRE ELECTRICAL DISCHARGE MACHINING USING TOPSIS METHOD , 2012 .

[40]  K. Furutani,et al.  Performance of Micro-Hole Drilling by Ultrasonic-Assisted Electro-Chemical Discharge Machining , 2012 .

[41]  Biing-Hwa Yan,et al.  Enhancement of ECDM efficiency and accuracy by spherical tool electrode , 2011 .

[42]  N. Bhatnagar,et al.  Investigation of drilling in fibre-reinforced plastics using response surface methodology , 2011 .

[43]  R. DeVor,et al.  Effect of Carbon Nanotube (CNT) Loading on the Thermomechanical Properties and the Machinability of CNT-Reinforced Polymer Composites , 2009 .

[44]  A. Abrão,et al.  Drilling of fiber reinforced plastics: A review , 2007 .

[45]  B. Bhattacharyya,et al.  Parametric analysis on electrochemical discharge machining of silicon nitride ceramics , 2006 .

[46]  Shaik Jeelani,et al.  Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite , 2006 .

[47]  Bodo Fiedler,et al.  Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study , 2005 .

[48]  K. Rajurkar,et al.  Pulse electrochemical discharge machining of glass-fiber epoxy reinforced composite , 2019, CIRP Annals.

[49]  H. Woodrow,et al.  : A Review of the , 2018 .

[50]  Xiao-jie Li,et al.  Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface , 2017 .

[51]  Mohammad Reza Razfar,et al.  Analytical and experimental study on the integration of ultrasonically vibrated tool into the micro electro-chemical discharge drilling , 2017 .