Visible-light vertical-cavity surface-emitting lasers grown by solid-source molecular beam epitaxy

Visible vertical-cavity surface-emitting lasers (VCSELs) are potential light sources for polymer optical fibre (POF) data transmission systems. Minimum attenuation of light in standard PMMA-POFs occurs at about 650 nm. For POFs of a few tens of meters in length VCSELs at slightly longer wavelengths (670 - 690 nm) are also acceptable. So far, the visible VCSELs have been grown by metal organic chemical vapour deposition (MOCVD). They may also be grown by a novel variant of molecular beam epitaxy (MBE), a so-called all-solid-source MBE or SSMBE. In this paper, we describe growth of the first visible-light VCSELs by SSMBE and present the main results obtained. In particular, we have achieved lasing action at a sub-milliamp cw drive current for a VCSEL having the emission window of 8um in diameter, while a 10um device exhibited an external quantum efficiency of 6.65% in CW operation at room temperature. The lasing action up to temperature of 45°C has been demonstrated.

[1]  Randall S. Geels,et al.  Drift leakage current in AlGaInP quantum-well lasers , 1993 .

[2]  A. R. Sugg,et al.  Hydrolyzation oxidation of AlxGa1−xAs‐AlAs‐GaAs quantum well heterostructures and superlattices , 1990 .

[3]  J. A. Lott,et al.  Visible (657 nm) InGaP/InAlGaP strained quantum well vertical‐cavity surface‐emitting laser , 1992 .

[4]  Pierre Petroff,et al.  Improved reliability of red GaInP vertical-cavity surface-emitting lasers using bias-induced annealing , 1998 .

[5]  M. Pessa,et al.  Annealing of the deep recombination center in GaInP/AlGaInP quantum wells grown by solid-source molecular beam epitaxy , 1999 .

[6]  A. Torabi,et al.  Reduction of oxygen contamination in InGaP and AlGaInP films grown by solid source molecular beam epitaxy , 1998 .

[7]  M. Pessa,et al.  All-solid-source molecular beam epitaxy for growth of III–V compound semiconductors , 1997 .

[8]  M. Pessa,et al.  Room-temperature CW operation of red vertical-cavity surface-emitting lasers grown by solid-source molecular beam epitaxy , 2000 .

[9]  Kent D. Choquette,et al.  Improved AlGaInP‐based red (670–690 nm) surface‐emitting lasers with novel C‐doped short‐cavity epitaxial design , 1995 .

[10]  J. A. Lott,et al.  Electrically injected visible (639-661 nm) vertical cavity surface emitting laser , 1993 .

[11]  M. Pessa,et al.  Resonant-cavity light-emitting diodes operating at 655 nm with a high external quantum efficiency and light power , 2001, IEEE Photonics Technology Letters.

[12]  T. E. Sale,et al.  Free carrier absorption in red VCSELs , 1999, 1999 IEEE LEOS Annual Meeting Conference Proceedings. LEOS'99. 12th Annual Meeting. IEEE Lasers and Electro-Optics Society 1999 Annual Meeting (Cat. No.99CH37009).

[13]  J. A. Lott,et al.  Room temperature continuous wave operation of red vertical cavity surface emitting laser diodes , 1993 .

[14]  Kent D. Choquette,et al.  High efficiency AlGaInP-based 660-680 nm vertical-cavity surface emitting lasers , 1995 .

[15]  K.D. Choquette,et al.  Temperature-dependent characteristics and single-mode performance of AlGaInP-based 670-690-nm vertical-cavity surface-emitting lasers , 1995, IEEE Photonics Technology Letters.

[16]  P. Dapkus,et al.  Epitaxial (Al,Ga)InP-oxide distributed Bragg reflectors for use in visible-wavelength optical devices , 1995, IEEE Photonics Technology Letters.

[17]  M. Pessa,et al.  High-efficiency GaInP-AlGaInP ridge waveguide single-mode lasers operating at 650 nm , 1998, IEEE Photonics Technology Letters.

[18]  B. E. Hammons,et al.  Advances in selective wet oxidation of AlGaAs alloys , 1997 .