A Compact Low-Power Current-to-Digital Readout Circuit for Amperometric Electrochemical Sensors

This paper introduces a novel compact low-power amperometric instrumentation design with current-to-digital output for electrochemical sensors. By incorporating the double layer capacitance of an electrochemical sensor’s impedance model, our new design can maintain performance while dramatically reducing circuit complexity and size. Electrochemical experiments with potassium ferricyanide show that the circuit output is in a good agreement with results obtained using commercial amperometric instrumentation. A high level of linearity ( $R^{2} = 0.991$ ) between the circuit output and the concentration of potassium ferricyanide was also demonstrated. Furthermore, we show that a CMOS implementation of the presented architecture could save 25.3% of the area and 47.6% of power compared to a traditional amperometric instrumentation structure. Thus, this new circuit structure is ideally suited for portable/wireless electrochemical sensing applications.

[1]  C. M. Pettit,et al.  Combining impedance spectroscopy with cyclic voltammetry: measurement and analysis of kinetic parameters for faradaic and nonfaradaic reactions on thin-film gold. , 2006, Analytical chemistry.

[2]  Andrew J. Mason,et al.  CMOS Amperometric ADC With High Sensitivity, Dynamic Range and Power Efficiency for Air Quality Monitoring , 2016, IEEE Transactions on Biomedical Circuits and Systems.

[3]  J. A. Plambeck,et al.  Electroanalytical chemistry : basic principles and applications , 1982 .

[4]  Giovanni De Micheli,et al.  A Differential Electrochemical Readout ASIC With Heterogeneous Integration of Bio-Nano Sensors for Amperometric Sensing , 2017, IEEE Transactions on Biomedical Circuits and Systems.

[5]  Roman Genov,et al.  CMOS Neurotransmitter Microarray: 96-Channel Integrated Potentiostat With On-Die Microsensors , 2013, IEEE Transactions on Biomedical Circuits and Systems.

[6]  Kartikeya Murari,et al.  VLSI Potentiostat Array With Oversampling Gain Modulation for Wide-Range Neurotransmitter Sensing , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[7]  Doris Schmitt-Landsiedel,et al.  A digital CMOS-based 24×16 sensor array platform for fully automatic electrochemical DNA detection. , 2010, Biosensors & bioelectronics.

[8]  F.H. Gebara,et al.  A CMOS-integrated microinstrument for trace detection of heavy metals , 2005, IEEE Journal of Solid-State Circuits.

[9]  Yu-Te Liao,et al.  A 3-$\mu\hbox{W}$ CMOS Glucose Sensor for Wireless Contact-Lens Tear Glucose Monitoring , 2012, IEEE Journal of Solid-State Circuits.

[10]  Syed K. Islam,et al.  A Glucose Biosensor Using CMOS Potentiostat and Vertically Aligned Carbon Nanofibers , 2016, IEEE Transactions on Biomedical Circuits and Systems.

[11]  Andrew J. Mason,et al.  Ultracompact Microwatt CMOS Current Readout With Picoampere Noise and Kilohertz Bandwidth for Biosensor Arrays , 2017, IEEE Transactions on Biomedical Circuits and Systems.

[12]  Marek Miśkowicz,et al.  Asynchronous Sigma-Delta analog-to digital converter based on the charge pump integrator , 2008 .

[13]  Shantanu Chakrabartty,et al.  A multi-channel femtoampere-sensitivity conductometric array for biosensing applications , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[14]  Lin Li,et al.  CMOS Electrochemical Instrumentation for Biosensor Microsystems: A Review , 2016, Sensors.

[15]  Gino Giusi,et al.  Amperometric Biosensor and Front-End Electronics for Remote Glucose Monitoring by Crosslinked PEDOT-Glucose Oxidase , 2018, IEEE Sensors Journal.

[16]  Sebastian Magierowski,et al.  A High-Efficiency Discrete Current Mode Output Stage Potentiostat Instrumentation for Self-Powered Electrochemical Devices , 2018, IEEE Transactions on Instrumentation and Measurement.

[17]  Bradley A. Minch,et al.  Design of a CMOS Potentiostat Circuit for Electrochemical Detector Arrays , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[18]  Richard B. Brown,et al.  A low-voltage, chemical sensor interface for systems-on-chip: the fully-differential potentiostat , 2004, 2004 IEEE International Symposium on Circuits and Systems (IEEE Cat. No.04CH37512).

[19]  Keiichi Kaneto,et al.  An Amperometric Glucose Biosensor With Enhanced Measurement Stability and Sensitivity Using an Artificially Porous Conducting Polymer , 2008, IEEE Transactions on Instrumentation and Measurement.

[20]  Graham A. Jullien,et al.  Current-Mirror-Based Potentiostats for Three-Electrode Amperometric Electrochemical Sensors , 2009, IEEE Transactions on Circuits and Systems I: Regular Papers.

[21]  Xiaoyi Mu.  Wearable gas sensor microsystem for personal healthcare and environmental monitoring , 2013 .

[22]  Su-Moon Park,et al.  Electrochemical impedance spectroscopy. , 2010, Annual review of analytical chemistry.

[23]  Andrew J. Mason,et al.  A redox-enzyme-based electrochemical biosensor with a CMOS integrated bipotentiostat , 2009, 2009 IEEE Biomedical Circuits and Systems Conference.

[24]  K.L. Shepard,et al.  Active CMOS Sensor Array for Electrochemical Biomolecular Detection , 2008, IEEE Journal of Solid-State Circuits.

[25]  Joseph Wang,et al.  Electrochemical biosensors: towards point-of-care cancer diagnostics. , 2006, Biosensors & bioelectronics.

[26]  Lin Li,et al.  CMOS Amperometric Instrumentation and Packaging for Biosensor Array Applications , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[27]  Francisco Serra-Graells,et al.  A 25-µW All-MOS Potentiostatic Delta-Sigma ADC for Smart Electrochemical Sensors , 2014, IEEE Transactions on Circuits and Systems I: Regular Papers.