In vitro and animal study of novel nano-hydroxyapatite/poly(epsilon-caprolactone) composite scaffolds fabricated by layer manufacturing process.

The purpose of this study was to propose a computer-controllable scaffold structure made by a layer manufacturing process (LMP) with addition of nano- or micro-sized particles and to investigate the effects of particle size in vitro. In addition, the superiority of this LMP method over the conventional scaffolds made by salt leaching and gas forming process was investigated through animal study. Using the LMP, we have created a new nano-sized hydroxyapatite/poly(epsilon-caprolactone) composite (n-HPC) scaffold and a micro-sized hydroxyapatite/poly(epsilon-caprolactone) composite (m-HPC) scaffold for bone tissue engineering applications. The scaffold macropores were well interconnected, with a porosity of 73% and a pore size of 500 microm. The compressive modulus of the n-HPC and m-HPC scaffolds was 6.76 and 3.18 MPa, respectively. We compared the cellular responses to the two kinds of scaffolds. Both n-HPC and m-HPC exhibited good in vitro biocompatibility. Attachment and proliferation of mesenchymal stem cells were better on the n-HPC than on the m-HPC scaffold. Moreover, significantly higher alkaline phosphatase activity and calcium content were observed on the n-HPC than on the m-HPC scaffold. In an animal study, the LMP scaffolds enhanced bone formation, owing to their well-interconnected pores. Radiological and histological examinations confirmed that the new bony tissue had grown easily into the entire n-HPC scaffold fabricated by LMP. We suggest that the well-interconnected pores in the LMP scaffolds might encourage cell attachment, proliferation, and migration to stimulate cell functions, thus enhancing bone formation in the LMP scaffolds. This study shows that bioactive and biocompatible n-HPC composite scaffolds prepared using an LMP have potential applications in bone tissue engineering.

[1]  Larry L. Hench,et al.  Bioglass ®45S5 Stimulates Osteoblast Turnover and Enhances Bone Formation In Vitro: Implications and Applications for Bone Tissue Engineering , 2000, Calcified Tissue International.

[2]  Peter X Ma,et al.  Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering. , 2004, Biomaterials.

[3]  K. Leong,et al.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.

[4]  Yubao Li,et al.  Preparation and characterization of a nano apatite/polyamide6 bioactive composite , 2007 .

[5]  R Langer,et al.  Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents. , 1996, Biomaterials.

[6]  P. Tresco,et al.  Relative importance of surface wettability and charged functional groups on NIH 3T3 fibroblast attachment, spreading, and cytoskeletal organization. , 1998, Journal of biomedical materials research.

[7]  Yi Zuo,et al.  Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering. , 2007, Biomaterials.

[8]  Jiang Chang,et al.  Preparation and characterization of bioactive and biodegradable Wollastonite/poly(D,L-lactic acid) composite scaffolds , 2004, Journal of materials science. Materials in medicine.

[9]  Rui L Reis,et al.  Bone tissue engineering: state of the art and future trends. , 2004, Macromolecular bioscience.

[10]  K. Lynch,et al.  Tissue response to implants of calcium phosphate ceramic in the rabbit spine. , 1983, Clinical orthopaedics and related research.

[11]  W. Jie,et al.  Tissue engineering scaffold material of nano-apatite crystals and polyamide composite , 2004 .

[12]  S F Hulbert,et al.  Tissue reaction to three ceramics of porous and non-porous structures. , 1972, Journal of biomedical materials research.

[13]  Jiang Chang,et al.  pH-compensation effect of bioactive inorganic fillers on the degradation of PLGA , 2005 .

[14]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[15]  Je-Yong Choi,et al.  Preparation of a bioactive and degradable poly(ε-caprolactone)/silica hybrid through a sol–gel method , 2002 .

[16]  J. Amédée,et al.  Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption. , 2001, Biomaterials.

[17]  W. Jie,et al.  A study on nano-composite of hydroxyapatite and polyamide , 2003 .

[18]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[19]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[20]  L. Brinson,et al.  A bioactive titanium foam scaffold for bone repair. , 2005, Acta biomaterialia.

[21]  Robert Langer,et al.  Preparation and characterization of poly(l-lactic acid) foams , 1994 .

[22]  D. Kalyon,et al.  Biocomposites of nanohydroxyapatite with collagen and poly(vinyl alcohol). , 2006, Colloids and surfaces. B, Biointerfaces.

[23]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[24]  Y. Gong,et al.  Studies on bone marrow stromal cells affinity of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate). , 2004, Biomaterials.

[25]  E. Livne,et al.  Bone marrow stem cells and biological scaffold for bone repair in aging and disease , 2005, Mechanisms of Ageing and Development.

[26]  P. Ma,et al.  Synthetic nano-scale fibrous extracellular matrix. , 1999, Journal of biomedical materials research.

[27]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[28]  X. D. Zhu,et al.  Three-dimensional nano-HAp/collagen matrix loading with osteogenic cells in organ culture. , 1999, Journal of biomedical materials research.

[29]  Jonathan C Knowles,et al.  Hydroxyapatite/poly(epsilon-caprolactone) composite coatings on hydroxyapatite porous bone scaffold for drug delivery. , 2004, Biomaterials.

[30]  Jukka Seppälä,et al.  In vitro evaluation of poly(ε-caprolactone-co-DL-lactide)/bioactive glass composites , 2002 .

[31]  Jiang Chang,et al.  In vitro degradation of porous degradable and bioactive PHBV/wollastonite composite scaffolds , 2005 .

[32]  M. Wang,et al.  Production and evaluation of biodegradable composites based on PHB-PHV copolymer. , 2002, Biomaterials.

[33]  Shen‐guo Wang,et al.  A novel porous cells scaffold made of polylactide-dextran blend by combining phase-separation and particle-leaching techniques. , 2002, Biomaterials.

[34]  Y. Gong,et al.  A study on the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds for bone tissue engineering , 2006 .