Discrete-time dynamic output feedback input shaping control of vibration in uncertain time-delay flexible structures

Abstract This paper proposes an observer-based discrete-time neuro-sliding mode control (NSMC) scheme combined with input shaping control for uncertain time-delay flexible structures. Only partial information of system states is known. It is shown that the proposed scheme not only guarantees closed-loop system stability, but also it effectively suppresses residual vibration and yields good robustness in the presence of state delays, input delays, parameter uncertainties, external disturbances and inaccurate impulse application instants simultaneously. The knowledge of upper bound of uncertainties is not required. Furthermore, it is shown that increasing the robustness to parameter uncertainties does not lengthen the duration of the impulse sequence. Simulation results demonstrate the efficacy of the proposed control scheme.

[1]  Kyung-Soo Kim,et al.  An impulse-time perturbation approach for enhancing the robustness of extra-insensitive input shapers , 2013, Autom..

[2]  William Singhose,et al.  On the equivalence of minimum time input shaping with traditional time-optimal control , 1995, Proceedings of International Conference on Control Applications.

[3]  O. Kaynak,et al.  On the stability of discrete-time sliding mode control systems , 1987 .

[4]  Tomás Vyhlídal,et al.  Signal shaper with a distributed delay: Spectral analysis and design , 2013, Autom..

[5]  Craig F. Cutforth,et al.  Adaptive input shaping for maneuvering flexible structures , 2004, Autom..

[6]  William Singhose,et al.  Robust Negative Input Shapers for Vibration Suppression , 2009 .

[7]  S. S. Gürleyük,et al.  Robust Three-impulse Sequence Input Shaper Design , 2007 .

[8]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[9]  Mohd Ashraf Ahmad,et al.  Comparison of Hybrid Control Schemes for Vibration Suppression of Flexible Robot Manipulator , 2009, 2009 International Conference on Computer Modeling and Simulation.

[10]  Suhada Jayasuriya,et al.  Robust Adaptive Control of Residual Vibration in Point-to-Point Motion of Flexible Bodies , 2007 .

[11]  Qidan Zhu,et al.  Adaptive chatter free sliding mode control for a class of uncertain chaotic systems , 2014, Appl. Math. Comput..

[12]  Dandan Wang,et al.  Non-fragile observer-based sliding mode control for Markovian jump systems with mixed mode-dependent time delays and input nonlinearity , 2014, Appl. Math. Comput..

[13]  Anthony Tzes,et al.  An adaptive input shaping control scheme for vibration suppression in slewing flexible structures , 1993, IEEE Trans. Control. Syst. Technol..

[14]  B. Drazenovic,et al.  The invariance conditions in variable structure systems , 1969, Autom..

[15]  Chul-Goo Kang,et al.  Experimental analysis of natural frequency error to residual vibration in ZV, ZVD, and ZVDD shapers , 2013, 2013 10th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI).

[16]  G. R. Heppler,et al.  Shaped Input Control of a System With Multiple Modes , 1993 .

[17]  Chul-Goo Kang On the derivative constraints of input shaping control , 2011 .

[18]  B. Draenovi The invariance conditions in variable structure systems , 1969 .

[19]  Anthony Tzes,et al.  Closed-Loop Input Shaping for Flexible Structures Using Time-Delay Control , 2000 .

[20]  Tomás Vyhlídal,et al.  Inverse signal shapers in effective feedback architecture , 2013, 2013 European Control Conference (ECC).

[21]  Ming-Chang Pai,et al.  Global synchronization of uncertain chaotic systems via discrete-time sliding mode control , 2014, Appl. Math. Comput..

[22]  Pyung Hun Chang,et al.  A concurrent design of input shaping technique and a robust control for high-speed/high-precision control of a chip mounter , 2001 .

[23]  Weibing Gao,et al.  Discrete-time variable structure control systems , 1995, IEEE Trans. Ind. Electron..

[24]  Yuanqing Xia,et al.  Robust adaptive sliding mode control for uncertain discrete-time systems with time delay , 2010, J. Frankl. Inst..

[25]  S. P. Bhat,et al.  Minimum power and minimum jerk position control and its applications in computer disk drives , 1991 .

[26]  Vicente Feliu,et al.  Adaptive input shaping for single-link flexible manipulators using an algebraic identification , 2012 .

[27]  Alok Sinha,et al.  Increasing Robustness of Input Shaping Method to Parametric Uncertainties and Time-Delays , 2011 .

[28]  Ming-Chang Pai,et al.  Discrete-time sliding mode control for uncertain systems with state and input delays , 2010, Int. J. Syst. Sci..

[29]  Vicente Feliú Batlle,et al.  Adaptive input shaping for manoeuvring flexible structures using an algebraic identification technique , 2009, Autom..

[30]  Mehdi Ahmadian,et al.  Active vibration control using optimized modified acceleration feedback with Adaptive Line Enhancer for frequency tracking , 2011 .

[31]  Asif Sabanoviç,et al.  Sliding-Mode Neuro-Controller for Uncertain Systems , 2007, IEEE Transactions on Industrial Electronics.

[32]  Yuanqing Xia,et al.  Observer-based sliding mode control for a class of discrete systems via delta operator approach , 2010, J. Frankl. Inst..

[33]  William Singhose,et al.  EXTRA-INSENSITIVE INPUT SHAPERS FOR CONTROLLING FLEXIBLE SPACECRAFT , 1996 .