Analysis of an infrared-assisted triple-flow prototype solar drying system with nano-embedded absorber coating: An experimental and numerical study

[1]  Azim Doğuş Tuncer,et al.  A new approach for environmental analysis of vapor compression refrigeration systems: Environmental impact index , 2023, Thermal Science and Engineering Progress.

[2]  Azim Doğuş Tuncer,et al.  Enhancing the Performance of an Unglazed Solar Air Collector Using Mesh Tubes and Fe3O4 Nano-Enhanced Absorber Coating , 2023, SSRN Electronic Journal.

[3]  F. Afshari,et al.  Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids , 2023, International Journal of Numerical Methods for Heat & Fluid Flow.

[4]  Ceylin Şirin,et al.  A review on building-integrated photovoltaic/thermal systems for green buildings , 2023, Applied Thermal Engineering.

[5]  Azim Doğuş Tuncer,et al.  Analysis of a spiral-formed solar air heating system with ceria nanoparticles-enhanced absorber coating , 2023, Journal of Building Engineering.

[6]  A. Yetim,et al.  Experimental and numerical study on a novel fanless air-to-air solar thermoelectric refrigerator equipped with boosted heat exchanger , 2023, Renewable Energy.

[7]  Emre Mandev,et al.  Effects of Double Glazing, Black Wall, Black Carpeted Floor and Insulation on Thermal Performance of Solar-Glazed Balconies , 2023, SSRN Electronic Journal.

[8]  Ataollah Khanlari,et al.  Investigating the effects of using MgO-CuO/water hybrid nanofluid in an evacuated solar water collector: A comprehensive survey , 2023, Thermal Science and Engineering Progress.

[9]  Ceylin Şirin,et al.  Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification , 2023, Sustainability.

[10]  Azim Doğuş Tuncer,et al.  Numerical and experimental investigation for enhancing thermal performance of a concentric heat exchanger using different scenarios , 2023, International Journal of Numerical Methods for Heat & Fluid Flow.

[11]  M. Saǧlam,et al.  Constructal enhancement of cooling performance of local heating elements with different heat generation rates under free and mixed convection regimes , 2022, International Communications in Heat and Mass Transfer.

[12]  F. Afshari,et al.  Thermal analysis of Fe3O4/water nanofluid in spiral and serpentine mini channels by using experimental and theoretical models , 2022, International Journal of Environmental Science and Technology.

[13]  Ceylin Şirin,et al.  Enhancing the performance of a greenhouse drying system by using triple-flow solar air collector with nano-enhanced absorber coating , 2022, Case Studies in Thermal Engineering.

[14]  Azim Doğuş Tuncer,et al.  Energy and exergy analysis of a vertical solar air heater with nano-enhanced absorber coating and perforated baffles , 2022, Renewable Energy.

[15]  Azim Doğuş Tuncer,et al.  Numerical and experimental investigation of a solar absorber extension tube with turbulators for upgrading the performance of a solar dryer , 2022, International Journal of Numerical Methods for Heat & Fluid Flow.

[16]  Ceylin Şirin,et al.  Experimental analysis of combined utilization of CuO nanoparticles in latent heat storage unit and absorber coating in a single-slope solar desalination system , 2022, Solar Energy.

[17]  Ceylin Şirin,et al.  Improving the performance of an active greenhouse dryer by integrating a solar absorber north wall coated with graphene nanoplatelet-embedded black paint , 2022, Solar Energy.

[18]  S. Zendehboudi,et al.  Comprehensive energy, exergy, enviro-exergy, and thermo-hydraulic performance assessment of a flat plate solar air heater with different obstacles , 2021, Applied Thermal Engineering.

[19]  Ceylin Şirin,et al.  Effect of different heat transfer fluids on discharging performance of phase change material included cylindrical container during forced convection , 2021, Journal of Central South University.

[20]  Ceylin Şirin,et al.  Experimental investigation of a parabolic greenhouse dryer improved with copper oxide nano‐enhanced latent heat thermal energy storage unit , 2021, International Journal of Energy Research.

[21]  N. Phu,et al.  Thermohydraulic Performance and Entropy Generation of a Triple-Pass Solar Air Heater with Three Inlets , 2021, Energies.

[22]  Mohammed A. Aurybi,et al.  Performance enhancement of solar vortex power generator by Al2O3-in-black paint coating , 2021 .

[23]  Azim Doğuş Tuncer,et al.  Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system , 2021 .

[24]  A. Kabeel,et al.  Performance improvement of pyramid solar distillers using a novel combination of absorber surface coated with CuO nano black paint, reflective mirrors, and PCM with pin fins , 2021 .

[25]  Azim Doğuş Tuncer,et al.  Energy and exergy analysis of a photovoltaic thermal (PVT) system used in solar dryer: A numerical and experimental investigation , 2021 .

[26]  E. Akpinar,et al.  Design, manufacturing, numerical analysis and environmental effects of single-pass forced convection solar air collector , 2021 .

[27]  P. Mahanta,et al.  Performance analysis of a solar air heater modified with zig-zag shaped copper tubes using energy-exergy methodology , 2021 .

[28]  W. G. Alshaer,et al.  Analysis of energy and specific energy requirements in various drying process of mint leaves , 2021 .

[29]  Vivek K. Patel,et al.  Performance assessment of flat-plate solar collector with internal fins and porous media through an integrated approach of CFD and experimentation , 2021, International Journal of Thermal Sciences.

[30]  Ranchan Chauhan,et al.  Energy and exergy analyses of drying medicinal herb in a novel forced convection solar dryer integrated with SHSM and PCM , 2021 .

[31]  J. T. Freire,et al.  Natural and forced air convection operation in a direct solar dryer assisted by photovoltaic module for drying of green onion , 2021 .

[32]  Z. Said,et al.  Analyzing entropy and thermal behavior of nanomaterial through solar collector involving new tapes , 2021 .

[33]  R. ElGamal,et al.  Incorporation of a solar tracking system for enhancing the performance of solar air heaters in drying apple slices , 2021, Renewable Energy.

[34]  Jagadish,et al.  Energy, exergy, and environmental (3E) analyses of reverse and cross-corrugated trapezoidal solar air collectors: An experimental study , 2021 .

[35]  Rajneesh Kumar,et al.  Unconventional solar air heater with triangular flow-passage: A CFD based comparative performance assessment of different cross-sectional rib-roughnesses , 2021, Renewable Energy.

[36]  Azim Doğuş Tuncer,et al.  Thermal performance improvement of an indirect solar dryer with tube-type absorber packed with aluminum wool , 2021 .

[37]  M. Sheikholeslami,et al.  Investigation of solar collector system with turbulator considering hybrid nanoparticles , 2021 .

[38]  S. Verma,et al.  EXERGETIC AND ENERGETIC EVALUATION OF AN INNOVATIVE SOLAR AIR HEATING SYSTEM COATED WITH GRAPHENE AND COPPER OXIDE NANO-PARTICLES , 2021, Journal of Thermal Engineering.

[39]  K. Sopian,et al.  Thermal performance of jet-impingement solar air heater with transverse ribs absorber plate , 2021 .

[40]  Z. Said,et al.  Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach , 2021 .

[41]  S. Gorjian,et al.  Investigation into the effects of SiO2/TiO2 nanolayer on the thermal performance of solar box type cooker , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[42]  P. Muthukumar,et al.  Experimental investigations on active solar dryers integrated with thermal storage for drying of black pepper , 2020 .

[43]  M. Saǧlam,et al.  Constructal design of heat sources with different heat generation rates for the hot spot mitigation , 2020 .

[44]  P. P. Tripathy,et al.  Drying characteristics, energetic and exergetic investigation during mixed-mode solar drying of pineapple slices at varied air mass flow rates , 2020 .

[45]  P. P. Tripathy,et al.  Thermal characteristics of a flat plate solar collector: Influence of air mass flow rate and correlation analysis among process parameters , 2020 .

[46]  V. S. Korpale,et al.  Numerical simulations and optimization of solar air heaters , 2020 .

[47]  Azim Doğuş Tuncer,et al.  Energy-exergy and enviro-economic survey of solar air heaters with various air channel modifications , 2020 .

[48]  P. Sevvel,et al.  Influence of CNT coating on the efficiency of solar parabolic trough collector using AL2O3 nanofluids - a multiple regression approach , 2020 .

[49]  V. Chandramohan,et al.  Energy and exergy analysis of forced and natural convection indirect solar dryers: Estimation of exergy inflow, outflow, losses, exergy efficiencies and sustainability indicators from drying experiments , 2020 .

[50]  J. Sarkar,et al.  Experimentation on solar-assisted heat pump dryer: Thermodynamic, economic and exergoeconomic assessments , 2020 .

[51]  Husam Naufal Saleh Yassien,et al.  Performance analysis of triple-pass solar air heater system: Effects of adding a net of tubes below absorber surface , 2020, Solar Energy.

[52]  A. Yadav,et al.  Efficient design of an artificially roughened solar air heater with semi-cylindrical side walls: CFD and exergy analysis , 2020 .

[53]  K. Wins,et al.  Effect of nano cupric oxide coating on the forced convection performance of a mixed-mode flat plate solar dryer , 2020 .

[54]  J. Sarkar,et al.  Experimental performance analysis of novel indirect-expansion solar-infrared assisted heat pump dryer for agricultural products , 2020 .

[55]  J. Sarkar,et al.  Experimental energy, exergy, economic and exergoeconomic analyses of batch-type solar-assisted heat pump dryer , 2020 .

[56]  Ali Amini,et al.  Thermal performance analysis of a quadruple-pass solar air collector assisted pilot-scale greenhouse dryer , 2020 .

[57]  M. F. El-Dosoky,et al.  An experimental investigation of the performance of new design of solar air heater (tubular) , 2020 .

[58]  Eid S. Gaballah,et al.  Energy and exergy analysis of a flat-plate solar air heater coated with carbon nanotubes and cupric oxide nanoparticles embedded in black paint , 2020 .

[59]  M. F. El-Dosoky,et al.  Study of the performance of double pass solar air heater of a new designed absorber: An experimental work , 2020 .

[60]  L. Bennamoun,et al.  Exergetic sustainability and economic analysis of hybrid solar-biomass dryer integrated with copper tubing as heat exchanger , 2020, Heliyon.

[61]  Azim Doğuş Tuncer,et al.  Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh , 2020 .

[62]  Azim Doğuş Tuncer,et al.  Drying municipal sewage sludge with v-groove triple-pass and quadruple-pass solar air heaters along with testing of a solar absorber drying chamber. , 2019, The Science of the total environment.

[63]  Mehrnush Motahayyer,et al.  Numerical analysis of thermal performance of a solar dryer and validated with experimental and thermo-graphical data , 2019, Solar Energy.

[64]  I. Singh,et al.  Experimental and CFD analysis of solar air heater duct roughened with multiple broken transverse ribs: A comparative study , 2019, Solar Energy.

[65]  N. Nwakuba.  Optimisation of energy consumption of a solar-electric dryer during hot air drying of tomato slices , 2019, Journal of Agricultural Engineering.

[66]  S. Jayaraj,et al.  CFD modeling of macro-encapsulated latent heat storage system used for solar heating applications , 2019, International Journal of Thermal Sciences.

[67]  Anoop Kumar,et al.  Performance improvement and development of correlation for friction factor and heat transfer using computational fluid dynamics for ribbed triangular duct solar air heater , 2019, Renewable Energy.

[68]  M. Saǧlam,et al.  Experimental and numerical investigation of natural convection in a discretely heated vertical channel: Effect of the blockage ratio of the heat sources , 2018, International Journal of Heat and Mass Transfer.

[69]  T. V. Arjunan,et al.  Thermodynamic analysis of a triple-pass solar dryer for drying potato slices , 2018, Journal of Thermal Analysis and Calorimetry.

[70]  P. Muthukumar,et al.  Drying kinetics and quality analysis of black turmeric (Curcuma caesia) drying in a mixed mode forced convection solar dryer integrated with thermal energy storage , 2018 .

[71]  Mostafa M. Azam,et al.  Energy analysis of hybrid solar tunnel dryer with PV system and solar collector for drying mint (MenthaViridis) , 2018 .

[72]  M. Avci,et al.  Natural convection in a parallel-plate vertical channel with discrete heating by two flush-mounted heaters: effect of the clearance between the heaters , 2018 .

[73]  Hamid Mortezapour,et al.  Tomato slices drying in a liquid desiccant-assisted solar dryer coupled with a photovoltaic-thermal regeneration system , 2018 .

[74]  H. Hassan,et al.  Experimental study on the performance of double pass and two inlet ports solar air heater (SAH) at different configurations of the absorber plate , 2018 .

[75]  A. Ghafoor,et al.  Study of the Drying Behavior and Performance Evaluation of Gas Fired Hybrid Solar Dryer , 2017 .

[76]  R. K. Swain,et al.  Performance Analysis of Double Pass Solar Air Heater with Bottom Extended Surface , 2017 .

[77]  Anoop Kumar,et al.  A parametric study of the 2D model of solar air heater with elliptical rib roughness using CFD , 2017 .

[78]  Magdalena Nemś,et al.  Experimental investigation of concentrated solar air-heater with internal multiple-fin array , 2016 .

[79]  G. N. Tiwari,et al.  Exergoeconomic analysis of photovoltaic-thermal (PVT) mixed mode greenhouse solar dryer , 2016 .

[80]  Ali Etem Gürel,et al.  Solar-assisted fluidized bed dryer integrated with a heat pump for mint leaves , 2016 .

[81]  Ibrahim M. Al-Helal,et al.  Performance analysis of photovoltaic–thermal (PVT) mixed mode greenhouse solar dryer , 2016 .

[82]  M. Yahya.  Design and Performance Evaluation of a Solar Assisted Heat Pump Dryer Integrated with Biomass Furnace for Red Chilli , 2016 .

[83]  S. Yahya,et al.  Design and Performance of Solar-assisted Fluidized Bed Drying of Paddy , 2016 .

[84]  K. Abdullah,et al.  Performance of a Recirculation Type Integrated Collector Drying Chamber (ICDC) Solar Dryer , 2015 .

[85]  H. Kawai,et al.  Study on effectiveness of continuous solar dryer integrated with desiccant thermal storage for drying cocoa beans , 2015 .

[86]  P. Velmurugan,et al.  Thermal Performance Studies on Multi-pass Flat-plate Solar Air Heater with Longitudinal Fins: An Analytical Approach , 2015 .

[87]  K. Sopian,et al.  Performance and cost benefits analysis of double-pass solar collector with and without fins , 2013 .

[88]  Hsuan Chang,et al.  Analytical and Experimental Study of Recycling Baffled Double-Pass Solar Air Heaters with Attached Fins , 2013 .

[89]  K. Sopian,et al.  Drying of Malaysian Capsicum annuum L. (Red Chili) Dried by Open and Solar Drying , 2013 .

[90]  Chii-Dong Ho,et al.  Performance improvement of a double-pass solar air heater with fins and baffles under recycling operation , 2012 .

[91]  Saeid Minaei,et al.  Saffron Drying with a Heat Pump–Assisted Hybrid Photovoltaic–Thermal Solar Dryer , 2012 .

[92]  A. P. Omojaro,et al.  Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber , 2010 .

[93]  P. P. Tripathy,et al.  Neural network approach for food temperature prediction during solar drying , 2009 .

[94]  K. Gottschalk,et al.  Hybrid Solar Dryer for Quality Dried Tomato , 2008 .

[95]  Hikmet Esen,et al.  Experimental energy and exergy analysis of a double-flow solar air heater having different obstacles on absorber plates , 2008 .

[96]  Saeid Minaei,et al.  Computer simulation of rough rice drying in a batch dryer , 2006 .

[97]  Azim Doğuş Tuncer,et al.  Experimental investigation of a double-flow photovoltaic/thermal air collector with natural dolomite powder-embedded thermal energy storage unit , 2023, Journal of Energy Storage.

[98]  Azim Doğuş Tuncer,et al.  Passive thermal management of photovoltaic panel by using phase change material-filled aluminum cans: an experimental study , 2022, Heat Transfer Research.

[99]  İpek Aytaç.  Experimental investigation on heat transfer performance of Fe2O3/water and Fe3O4/water nanofluids in a plate heat exchanger , 2022, Heat Transfer Research.

[100]  A. Sözen,et al.  Numerical and experimental study on thermal performance of a novel shell and helically coiled tube heat exchanger design with integrated rings and discs , 2022, International Journal of Thermal Sciences.

[101]  P. P. Tripathy,et al.  Experimental investigation on heat transfer performance of solar collector with baffles and semicircular loops fins under varied air mass flow rates , 2022, International Journal of Thermal Sciences.

[102]  İpek Aytaç.  Determination of the thermal behavior of water-based Fe3O4 nanofluid using thermophysical property models , 2022, Heat Transfer Research.

[103]  E. Manay,et al.  PERFORMANCE ANALYSIS OF THERMO-ELECTRIC COOLING SYSTEMS EQUIPPED WITH SURFACE MODIFIED AND RECYCLED NANOFLUIDS , 2022, Journal of Enhanced Heat Transfer.

[104]  M. Sheikholeslami,et al.  Performance of solar collector with turbulator involving nanomaterial turbulent regime , 2021 .

[105]  R. Kumar,et al.  Performance enhancement analysis of triangular solar air heater coated with nanomaterial embedded in black paint , 2020 .

[106]  Azim Doğuş Tuncer,et al.  Experimental and numerical study of the effect of integrating plus-shaped perforated baffles to solar air collector in drying application , 2020 .

[107]  Anoop Kumar,et al.  Investigation of heat transfer augmentation and friction factor in triangular duct solar air heater due to forward facing chamfered rectangular ribs: A CFD based analysis , 2018 .

[108]  T. V. Arjunan,et al.  Experimental study on triple pass solar air heater with thermal energy storage for drying mint leaves , 2018 .

[109]  Vijayanandraj Selvaraj,et al.  Drying of carrot slices in a triple pass solar dryer , 2017 .

[110]  Kamaruzzaman Sopian,et al.  Energy and exergy analysis of hybrid solar drying system , 2016 .

[111]  K. Sopian,et al.  Performance analysis of solar drying system for red chili , 2014 .

[112]  R. Lewis,et al.  Continuum thermodynamic modeling of drying capillary particulate materials using an unstructured finite volume algorithm , 2003 .