Thirty-minute plasma sustainment by real-time magnetic-axis swing for effective divertor-load-dispersion in the Large Helical Device

Achieving steady-state plasma operation at high plasma temperatures is one of the important goals of worldwide magnetic fusion research. A high temperature of approximately 2keV, and steady-state plasma-sustainment operation of the Large Helical Device (LHD) [O. Motojima, K. Akaishi, H. Chikaraishi et al., Nucl. Fusion 40, 599 (2000)] is reported. High-temperature plasmas were created and maintained for more than 30min with a world record injected heating power of 1.3GJ. The three-dimensional heat-deposition profile of the LHD helical divertor was modified and during long-pulse discharges it effectively dispersed the heat load using a magnetic-axis swing technique developed at the LHD. A sweep of only 3cm of the major radius of the magnetic axis position (less than 1% of the major radius of the LHD) was enough to disperse the divertor heat load. The modification of the heat-load profile was explained well by field-line tracing. The steady-state plasma was heated and sustained mainly by hydrogen minority i...

[1]  Kozo Yamazaki,et al.  Progress summary of LHD engineering design and construction , 2000 .

[2]  W. A. Cooper,et al.  Review on the Progress of the LHD Experiment , 2004 .

[3]  K. Kawahata,et al.  Ion cyclotron range of frequencies heating and high-energy particle production in the Large Helical Device , 2003 .

[4]  Takashi Shimozuma,et al.  Long Pulse ECH Plasma in LHD , 2005 .

[5]  K. Kawahata,et al.  Long-Pulse Operation and High-Energy Particle Confinement Study in ICRF Heating of LHD , 2004 .

[6]  K. Kawahata,et al.  Plasma characteristics of long-pulse discharges heated by neutral beam injection in the Large Helical Device , 2000 .

[7]  K. Kawahata,et al.  Ion Cyclotron range of frequency heating experiments on the large helical device and high energy ion behavior , 2001 .

[8]  T. Morisaki,et al.  Overview and Future Plan of Helical Divertor Study in the Large Helical Device , 2006 .

[9]  Masaki Osakabe,et al.  Thirty-Minute Plasma Sustainment by ICRF, EC and NBI Heating in the Large Helical Device , 2005 .

[10]  T. Morisaki,et al.  Effect of Magnetic Ergodicity on Edge Plasma Structure and Divertor Flux Distribution in LHD , 2002 .

[11]  M. Emoto,et al.  Recent Results in Large Helical Device , 2005, 21st IEEE/NPS Symposium on Fusion Engineering SOFE 05.

[12]  Masaki Osakabe,et al.  The divertor plasma characteristics in the Large Helical Device , 2002 .

[13]  M. Shoji,et al.  Overview of large helical device diagnostics (invited) , 2001 .

[14]  Mizuki Sakamoto,et al.  Steady-state tokamak operation, ITB transition and sustainment and ECCD experiments in TRIAM-1M , 2005 .

[15]  Masaki Osakabe,et al.  Long-pulse plasma discharge on the Large Helical Device , 2006 .

[16]  A. Becoulet,et al.  Recent fully non-inductive operation results in Tore Supra with 6?min, 1?GJ plasma discharges , 2004 .

[17]  A. Sagara,et al.  The large helical device (LHD) helical divertor , 1994 .

[18]  K. Kawahata,et al.  Ion and electron heating in ICRF heating experiments on LHD , 2001 .