Observation of Defects that Reduce Schottky Barrier Height in 4H-SiC Schottky Contacts Using Electrochemical Deposition of ZnO

We performed the electrochemical deposition of ZnO on 4H-SiC epilayers and characterized Schottky diodes fabricated on the same epilayers in order to find the positions of defects that cause the low Schottky barrier height. We found that the positions where ZnO was deposited corresponded to the positions of contacts with lower Schottky barrier heights than the other contacts. After the removal of the ZnO layer, the surfaces of the ZnO-deposited positions were observed by atomic force microscopy. Photoluminescence mapping was also performed to observe the distribution of stacking faults. Then, the epilayer was etched using molten salt and the resulting etch pits were observed. Finally, we discussed the types of defects that reduce the Schottky barrier height.

[1]  M. Ichimura,et al.  Correlation between Schottky Contact Characteristics and Regions with a Low Barrier Height Revealed by the Electrochemical Deposition on 4H-SiC , 2010 .

[2]  K. Fukuda,et al.  Influence of Processing and of Material Defects on the Electrical Characteristics of SiC-SBDs and SiC-MOSFETs , 2010 .

[3]  T. Kimoto,et al.  Characterization of stacking faults in 4H-SiC epilayers by room-temperature microphotoluminescence mapping , 2008 .

[4]  Masashi Kato,et al.  Observation of Inhomogeneity of Schottky Barrier Height on 4H–SiC Using the Electrochemical Deposition , 2007 .

[5]  Qamar Ul Wahab,et al.  Defect-driven inhomogeneities in Ni∕4H–SiC Schottky barriers , 2005 .

[6]  H. Matsunami,et al.  Characterization of in-grown stacking faults in 4H–SiC (0001) epitaxial layers and its impacts on high-voltage Schottky barrier diodes , 2005 .

[7]  H. Matsunami,et al.  Origin of Leakage Current in SiC Schottky Barrier Diodes at High Temperature , 2004 .

[8]  Enrico Zanoni,et al.  Richardson’s constant in inhomogeneous silicon carbide Schottky contacts , 2003 .

[9]  A. Ellison,et al.  Influence of epitaxial growth and substrate-induced defects on the breakdown of 4H–SiC Schottky diodes , 2000 .

[10]  H. Matsunami,et al.  Effects of surface defects on the performance of 4H– and 6H–SiC pn junction diodes , 1999 .

[11]  M. Bhatnagar,et al.  Electrical characteristics of schottky barriers on 4H-SiC: The effects of barrier height nonuniformity , 1999 .

[12]  O. Noblanc,et al.  Barrier inhomogeneities and electrical characteristics of Ti/4H-SiC Schottky rectifiers , 1999 .

[13]  H. Matsunami,et al.  Analysis of Schottky Barrier Heights of Metal/SiC Contacts and Its Possible Application to High‐Voltage Rectifying Devices , 1997 .

[14]  T. Kimoto,et al.  High performance of high-voltage 4H-SiC Schottky barrier diodes , 1995, IEEE Electron Device Letters.

[15]  Tung,et al.  Electron transport at metal-semiconductor interfaces: General theory. , 1992, Physical review. B, Condensed matter.

[16]  King-Ning Tu,et al.  Parallel silicide contacts , 1980 .

[17]  J. Takahashi,et al.  Sublimation growth of SiC single crystalline ingots on faces perpendicular to the (0001) basal plane , 1994 .