Locking free isogeometric formulations of curved thick beams

Abstract We are interested in this work in methods that alleviate shear and membrane locking, typically involved in thick plates and shells. We investigate the use of higher order NURBS to address static straight and curved Timoshenko beam with several approaches usually used in standard locking free finite elements. Among theses methods, two main new strategies have been developed for NURBS: selective reduced integration and B ¯ projection method. Although the simplicity of implementation and the low computational cost suggest that the first method is attractive, this approach is difficult to be generalized to arbitrary polynomial order and continuity. Conversely, the B ¯ one offers a global formalism suitable to tackle every NURBS problem and appears then as the most serious concurrent. The resulting NURBS B ¯ element, which happens to be equivalent to a NURBS mixed element, provides robust and accurate results. The performance of the two methods is assessed on several numerical examples, and comparisons are made with other published techniques to prove their effectiveness.

[1]  Alessandro Reali,et al.  Duality and unified analysis of discrete approximations in structural dynamics and wave propagation : Comparison of p-method finite elements with k-method NURBS , 2008 .

[2]  M. L. Bucalém,et al.  Higher‐order MITC general shell elements , 1993 .

[3]  Ernst Rank,et al.  On the accuracy of p-version elements for the Reissner-Mindlin plate problem , 1998 .

[4]  E. Ramm,et al.  A unified approach for shear-locking-free triangular and rectangular shell finite elements , 2000 .

[5]  G. Farin.  Curves and Surfaces for Cagd: A Practical Guide , 2001 .

[6]  T. Belytschko,et al.  Membrane Locking and Reduced Integration for Curved Elements , 1982 .

[7]  Manfred Bischoff,et al.  Numerical efficiency, locking and unlocking of NURBS finite elements , 2010 .

[8]  Thomas J. R. Hughes,et al.  A simple and efficient finite element for plate bending , 1977 .

[9]  T. Hughes,et al.  B¯ and F¯ projection methods for nearly incompressible linear and non-linear elasticity and plasticity using higher-order NURBS elements , 2008 .

[10]  Manfred Bischoff,et al.  The discrete strain gap method and membrane locking , 2005 .

[11]  H. R. Meck.  An accurate polynomial displacement function for unite ring elements , 1980 .

[12]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[13]  Tom Lyche,et al.  Discrete B-splines and subdivision techniques in computer-aided geometric design and computer graphics , 1980 .

[14]  T. Hughes.  Generalization of selective integration procedures to anisotropic and nonlinear media , 1980 .

[15]  T. Belytschko,et al.  A uniform strain hexahedron and quadrilateral with orthogonal hourglass control , 1981 .

[16]  D. G. Ashwell,et al.  Finite elements for thin shells and curved members , 1976 .

[17]  Yoon Young Kim,et al.  A new higher‐order hybrid‐mixed curved beam element , 1998 .

[18]  P. Raveendranath,et al.  Flexure and torsion locking phenomena in out-of-plane deformation of Timoshenko curved beam element , 2012 .

[19]  Whirley.  DYNA3D: A nonlinear, explicit, three-dimensional finite element code for solid and structural mechanics , 1993 .

[20]  J. C. Simo,et al.  On the Variational Foundations of Assumed Strain Methods , 1986 .

[21]  K. Bathe,et al.  A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation , 1985 .

[22]  Alessandro Reali,et al.  Studies of Refinement and Continuity in Isogeometric Structural Analysis (Preprint) , 2007 .

[23]  T. Hughes.  Equivalence of Finite Elements for Nearly Incompressible Elasticity , 1977 .

[24]  T. Hughes,et al.  Isogeometric analysis : CAD, finite elements, NURBS, exact geometry and mesh refinement , 2005 .

[25]  J. M. Kennedy,et al.  Hourglass control in linear and nonlinear problems , 1983 .

[26]  Thomas J. R. Hughes,et al.  Isogeometric shell analysis: The Reissner-Mindlin shell , 2010 .

[27]  T. Hughes,et al.  Efficient quadrature for NURBS-based isogeometric analysis , 2010 .

[28]  Ted Belytschko,et al.  Efficient linear and nonlinear heat conduction with a quadrilateral element , 1983 .

[29]  D. F. Rogers,et al.  An Introduction to NURBS: With Historical Perspective , 2011 .

[30]  Manfred Bischoff,et al.  Stabilized DSG plate and shell elements , 2001 .

[31]  T. Hughes,et al.  A Simple Algorithm for Obtaining Nearly Optimal Quadrature Rules for NURBS-based Isogeometric Analysis , 2012 .

[32]  Ray W. Clough,et al.  Improved numerical integration of thick shell finite elements , 1971 .

[33]  Hong Qin,et al.  Polycube splines , 2008, Comput. Aided Des..

[34]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[35]  Alessandro Reali,et al.  Isogeometric Analysis of Structural Vibrations , 2006 .

[36]  Gangan Prathap,et al.  A linear thick curved beam element , 1986 .

[37]  Gangan Prathap,et al.  Reduced integration and the shear-flexible beam element , 1982 .

[38]  Ahmed K. Noor,et al.  Mixed models and reduced/selective integration displacement models for nonlinear analysis of curved beams , 1981 .

[39]  Thomas J. R. Hughes,et al.  Isogeometric Analysis: Toward Integration of CAD and FEA , 2009 .

[40]  T. Hughes,et al.  Finite Elements Based Upon Mindlin Plate Theory With Particular Reference to the Four-Node Bilinear Isoparametric Element , 1981 .

[41]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[42]  Gangan Prathap,et al.  Mechanics of field-consistency in finite element analysis—a penalty function approach , 1987 .