Imaging metallic samples using electrical capacitance tomography: forward modelling and reconstruction algorithms

Electrical capacitance tomography (ECT) is an imaging technology used to reconstruct the permittivity distribution within the sensing region. So far, ECT has been primarily used to image non-conductive media only, since if the conductivity of the imaged object is high, the capacitance measuring circuit will be almost shortened by the conductivity path and a clear image cannot be produced using the standard image reconstruction approaches. This paper tackles the problem of imaging metallic samples using conventional ECT systems by investigating the two main aspects of image reconstruction algorithms, namely the forward problem and the inverse problem. For the forward problem, two different methods to model the region of high conductivity in ECT is presented. On the other hand, for the inverse problem, three different algorithms to reconstruct the high contrast images are examined. The first two methods are the linear single step Tikhonov method and the iterative total variation regularization method, and use two sets of ECT data to reconstruct the image in time difference mode. The third method, namely the level set method, uses absolute ECT measurements and was developed using a metallic forward model. The results indicate that the applications of conventional ECT systems can be extended to metal samples using the suggested algorithms and forward model, especially using a level set algorithm to find the boundary of the metal.

[1]  M. Soleimani,et al.  Level set reconstruction of conductivity and permittivity from boundary electrical measurements using experimental data , 2006 .

[2]  G. E. Fasching,et al.  A capacitive system for three‐dimensional imaging of fluidized beds , 1991 .

[3]  Manuchehr Soleimani,et al.  Imaging floating metals and dielectric objects using electrical capacitance tomography , 2015 .

[4]  Miguel Moscoso,et al.  Structural level set inversion for microwave breast screening , 2010 .

[5]  Hongjian Zhang,et al.  Gas–oil two-phase flow measurement using an electrical capacitance tomography system and a Venturi meter , 2005 .

[6]  Robert B. White.  Using electrical capacitance tomography to monitor gas voids in a packed bed of solids , 2002 .

[7]  E. M. Freeman,et al.  A method of computing the sensitivity of electromagnetic quantities to changes in materials and sources , 1994 .

[8]  Patrick Chevret,et al.  Neural network approach for inverting velocity dispersion; application to sediment and to sonar target characterization , 2000 .

[9]  W. A. Deabes,et al.  Solution of the Forward Problem of Electric Capacitance Tomography of Conductive Materials , .

[10]  Tom Goldstein,et al.  The Split Bregman Method for L1-Regularized Problems , 2009, SIAM J. Imaging Sci..

[11]  Wuqiang Yang,et al.  Monitoring water hammer by capacitance tomography , 1996 .

[12]  R. C. Waterfall,et al.  Combustion imaging from electrical impedance measurements , 1996 .

[13]  Jiamin Ye,et al.  A sparsity reconstruction algorithm for electrical capacitance tomography based on modified Landweber iteration , 2014 .

[14]  M. S. Beck,et al.  Capacitance-based tomographic flow imaging system , 1988 .

[15]  F. Santosa,et al.  Reconstruction of a two-dimensional binary obstacle by controlled evolution of a level-set , 1998 .

[16]  J J Vaquero,et al.  Fluorescence diffuse optical tomography using the split Bregman method. , 2011, Medical physics.

[17]  Yewang Su,et al.  Investigation of square fluidized beds using capacitance tomography: preliminary results , 2001 .

[18]  L. Rudin,et al.  Nonlinear total variation based noise removal algorithms , 1992 .

[19]  Tomasz Dyakowski,et al.  Real time capacitance imaging of bubble formation at the distributor of a fluidized bed , 1995 .

[20]  F. Santosa.  A Level-set Approach Inverse Problems Involving Obstacles , 1995 .

[21]  E. Miller,et al.  A shape reconstruction method for electromagnetic tomography using adjoint fields and level sets , 2000 .

[22]  Wotao Yin,et al.  An Iterative Regularization Method for Total Variation-Based Image Restoration , 2005, Multiscale Model. Simul..

[23]  O. Isaksen,et al.  A capacitance-based tomography system for interface measurement in separation vessels , 1994 .

[24]  J. Sethian,et al.  FRONTS PROPAGATING WITH CURVATURE DEPENDENT SPEED: ALGORITHMS BASED ON HAMILTON-JACOB1 FORMULATIONS , 2003 .

[25]  Tony F. Chan,et al.  A Multiphase Level Set Framework for Image Segmentation Using the Mumford and Shah Model , 2002, International Journal of Computer Vision.

[26]  Manuel Desco,et al.  Application of the compressed sensing technique to self‐gated cardiac cine sequences in small animals , 2014, Magnetic resonance in medicine.