Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting.
暂无分享,去创建一个
L. Murr | R. Wicker | Shujun Li | F. Medina | X. Y. Cheng | Z. B. Zhang | R. Yang | Y. Hao | S. J. Li | S J Li | R Yang | L E Murr | X Y Cheng | F Medina | R B Wicker | Z B Zhang | Y L Hao | Zhenbo Zhang | Y. Hao | Z. Zhang | Francisco Medina
[1] T. J. Kim,et al. Titanium powder sintering for preparation of a porous functionally graded material destined for orthopaedic implants , 2001, Journal of materials science. Materials in medicine.
[2] L. W. Tsay,et al. The effect of microstructures on the fatigue crack growth in Ti_6Al_4V laser welds , 1997 .
[3] Colleen L Flanagan,et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.
[4] Mitsuo Niinomi,et al. Recent metallic materials for biomedical applications , 2002 .
[5] Abhay Pandit,et al. Fabrication methods of porous metals for use in orthopaedic applications. , 2006, Biomaterials.
[6] Yang Hao,et al. Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting , 2012 .
[7] Timothy Douglas,et al. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering. , 2009, Tissue engineering. Part C, Methods.
[8] R. Poprawe,et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .
[9] C. Chung,et al. Porous TiNi shape memory alloy with high strength fabricated by self-propagating high-temperature synthesis , 2004 .
[10] L. Murr,et al. Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting. , 2011, Journal of the mechanical behavior of biomedical materials.
[11] M. Ashby,et al. Metal Foams: A Design Guide , 2000 .
[12] L. Murr,et al. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[13] L. Murr,et al. Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti―6Al―4V targets , 2009 .
[14] David C. Dunand,et al. Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2 , 2008 .
[15] D. Dunand,et al. Directionally freeze-cast titanium foam with aligned, elongated pores , 2008 .
[16] Yifu Shen,et al. Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods , 2009 .
[17] M. Ashby,et al. Cellular solids: Structure & properties , 1988 .
[18] Yifu Shen,et al. Processing conditions and microstructural features of porous 316L stainless steel components by DMLS , 2008 .
[19] R. Singer,et al. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.
[20] Ivan P. Parkin,et al. Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi , 2008 .
[21] P. He,et al. Interfacial microstructure and strength of the dissimilar joint Ti3Al/TC4 welded by the electron beam process , 2006 .
[22] C. Wen,et al. Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti-18Nb-4Sn alloy for biomedical applications. , 2008, Acta biomaterialia.
[23] Robert F. Singer,et al. Cellular Titanium by Selective Electron Beam Melting , 2007 .
[24] Naoyuki Nomura,et al. Mechanical properties of porous titanium compacts prepared by powder sintering , 2003 .
[25] Ryan B. Wicker,et al. Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting , 2010 .
[26] David C. Dunand,et al. Processing of Titanium Foams , 2004 .
[27] J. Planell,et al. Comparison of the mechanical properties between tantalum and nickel–titanium foams implant materials for bone ingrowth applications , 2007 .
[28] Clemens A van Blitterswijk,et al. Bone ingrowth in porous titanium implants produced by 3D fiber deposition. , 2007, Biomaterials.
[29] Wenguang Zhang,et al. Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process , 2009 .