A Novel Low-Cost, Large Curvature Bend Sensor Based on a Bowden-Cable

Bend sensors have been developed based on conductive ink, optical fiber, and electronic textiles. Each type has advantages and disadvantages in terms of performance, ease of use, and cost. This study proposes a new and low-cost bend sensor that can measure a wide range of accumulated bend angles with large curvatures. This bend sensor utilizes a Bowden-cable, which consists of a coil sheath and an inner wire. Displacement changes of the Bowden-cable’s inner wire, when the shape of the sheath changes, have been considered to be a position error in previous studies. However, this study takes advantage of this position error to detect the bend angle of the sheath. The bend angle of the sensor can be calculated from the displacement measurement of the sensing wire using a Hall-effect sensor or a potentiometer. Simulations and experiments have shown that the accumulated bend angle of the sensor is linearly related to the sensor signal, with an R-square value up to 0.9969 and a root mean square error of 2% of the full sensing range. The proposed sensor is not affected by a bend curvature of up to 80.0 m−1, unlike previous bend sensors. The proposed sensor is expected to be useful for various applications, including motion capture devices, wearable robots, surgical devices, or generally any device that requires an affordable and low-cost bend sensor.

[1]  Lucy E. Dunne,et al.  A Comparative Evaluation of Bend Sensors for Wearable Applications , 2007, 2007 11th IEEE International Symposium on Wearable Computers.

[2]  D R Hose,et al.  An inexpensive sensor for measuring surface geometry. , 1999, Medical engineering & physics.

[3]  Paolo Dario,et al.  Tendon sheath analysis for estimation of distal end force and elongation , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[4]  Qida Zhao,et al.  A smart bending sensor with a novel temperature- and strain-insensitive long-period grating , 2004 .

[5]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[6]  Joseph Classen,et al.  Development and evaluation of a low-cost sensor glove for assessment of human finger movements in neurophysiological settings , 2009, Journal of Neuroscience Methods.

[7]  Kyu-Jin Cho,et al.  Soft Robotic Blocks: Introducing SoBL, a Fast-Build Modularized Design Block , 2016, IEEE Robotics & Automation Magazine.

[8]  H. van der Kooij,et al.  Design and Evaluation of the LOPES Exoskeleton Robot for Interactive Gait Rehabilitation , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[9]  Roberto Ponticelli,et al.  Full perimeter obstacle contact sensor based on flex sensors , 2008 .

[10]  Ali Rostami,et al.  Comparative study between LPFG- and FBG-based bending sensors , 2014 .

[11]  HyunKi In,et al.  Implementation of various control algorithms for hand rehabilitation exercise using wearable robotic hand , 2013, Intell. Serv. Robotics.

[12]  Philippe Zanne,et al.  Improvements in the control of a flexible endoscopic system , 2012, 2012 IEEE International Conference on Robotics and Automation.

[13]  I. Bennion,et al.  Optical bend sensor based on measurement of resonance mode splitting of long-period fiber grating , 2000, IEEE Photonics Technology Letters.

[14]  Daniel D. Frey,et al.  Efficiency of Prosthetic Cable and Housing , 1995 .

[15]  Alessandro Tognetti,et al.  Wearable Goniometer and Accelerometer Sensory Fusion for Knee Joint Angle Measurement in Daily Life , 2015, Sensors.

[16]  Shuichi Wakimoto,et al.  Flexible displacement sensor using injected conductive paste , 2008 .

[17]  Giovanni Saggio Mechanical model of flex sensors used to sense finger movements , 2012 .

[18]  Brian Byunghyun Kang,et al.  Exo-Glove: A Wearable Robot for the Hand with a Soft Tendon Routing System , 2015, IEEE Robotics & Automation Magazine.

[19]  Kyu-Jin Cho,et al.  Feedforward friction compensation of Bowden-cable transmission via loop routing , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[20]  Jianquan Yao,et al.  Characteristics of bend sensor based on two-notch Mach–Zehnder fiber interferometer , 2012 .

[21]  Giovanni Saggio Electrical resistance profiling of bend sensors adopted to measure spatial arrangement of the human body , 2011, ISABEL '11.

[22]  Donald E. Knuth Two notes on notation , 1992 .

[23]  Ding Tianhuai,et al.  A novel flexible sensor for compression stress relaxation , 2003, Proceedings of IEEE Sensors 2003 (IEEE Cat. No.03CH37498).

[24]  Shuisheng Jian,et al.  Highly sensitive bending sensor based on multimode–multimode–coreoffset fiber structure , 2015 .

[25]  Shuo-Hung Chang,et al.  A wearable yarn-based piezo-resistive sensor , 2008 .

[26]  David Zeltzer,et al.  A survey of glove-based input , 1994, IEEE Computer Graphics and Applications.

[27]  Conor J. Walsh,et al.  Multi-joint actuation platform for lower extremity soft exosuits , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[28]  P E Patterson,et al.  Development and evaluation of an inexpensive sensor system for use in measuring relative finger positions. , 1997, Medical engineering & physics.

[29]  Xinyong Dong,et al.  Novel bending sensor based on a meniscus shaped beam with LPG , 2013 .

[30]  Robert D. Howe,et al.  Robotic catheter cardiac ablation combining ultrasound guidance and force control , 2014, Int. J. Robotics Res..

[31]  K.S.C. Kuang,et al.  An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements , 2002 .

[32]  Tegoeh Tjahjowidodo,et al.  Adaptive control of position compensation for Cable-Conduit Mechanisms used in flexible surgical robots , 2014, 2014 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO).

[33]  Lisa K Simone,et al.  Design considerations for a wearable monitor to measure finger posture , 2005, Journal of NeuroEngineering and Rehabilitation.

[34]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[35]  H. S. Wolff,et al.  iRun: Horizontal and Vertical Shape of a Region-Based Graph Compression , 2022, Sensors.