Development of enhancement mode AlGaN/GaN MOS-HEMTs using localized gate-foot oxidation

A new method for realising enhancement mode AlGaN/GaN devices using a localized gate-foot oxidation is described. Thermal oxidation of the AlGaN barrier layer converts the top surface/part of this layer into aluminium and gallium oxides, which serve as a good gate dielectric and improve the gate leakage current by several orders of magnitude compared to a Schottky gate. The oxidation process leaves a thinner AlGaN barrier which can result in normally off operation. Without special precaution, however, the oxidation of the AlGaN barrier is not uniform from the top but occurs at higher rates at the defect/dislocation sites. This makes it impossible to control the barrier thickness and so rendering the barrier useless. To avoid the problem of non-uniform oxidation, a thin layer of Aluminum is first deposited on the barrier layer and oxidized to form Al2O3 on top. This additional oxide layer seems to ensure uniform oxidation of the AlGaN barrier layer underneath on subsequent further oxidation. Preliminary results of the fabricated 2μm × 100μm AlGaN/GaN MOS-HEMTs with a partially oxidized barrier layer showed a maximum drain current of more than 700 m A/mm at high gate bias of 5V with very less current compression.

[1]  Gaudenzio Meneghesso,et al.  Systematic characterization of Cl 2 reactive ion etching for gate recessing in AlGaN/GaN HEMTs , 2002 .

[2]  Takashi Mukai,et al.  Enhancement-Mode AlGaN/AlN/GaN High Electron Mobility Transistor with Low On-State Resistance and High Breakdown Voltage , 2006 .

[3]  Y. Ikeda,et al.  Novel high drain breakdown voltage AlGaN/GaN HFETs using selective thermal oxidation process , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[4]  Baoshun Zhang,et al.  Enhancement-mode AlGaN/GaN HEMTs on silicon substrate , 2006 .

[5]  C. Gaquiere,et al.  InAlN/GaN MOSHEMT With Self-Aligned Thermally Generated Oxide Recess , 2009, IEEE Electron Device Letters.

[6]  I. Omura,et al.  Recessed-gate structure approach toward normally off high-Voltage AlGaN/GaN HEMT for power electronics applications , 2006, IEEE Transactions on Electron Devices.

[7]  C. Bongiorno,et al.  Electrical behavior of AlGaN/GaN heterostuctures upon high-temperature selective oxidation , 2009 .

[8]  Kevin J. Chen,et al.  Self-aligned enhancement-mode AlGaN/GaN HEMTs using fluoride-based plasma treatment , 2005, 63rd Device Research Conference Digest, 2005. DRC '05..

[9]  U. Mishra,et al.  AlGaN/GaN HEMTs-an overview of device operation and applications , 2002, Proc. IEEE.

[10]  K. Lau,et al.  Enhancement-mode AlGaN/GaN HEMTs on silicon substrate , 2006, IEEE Transactions on Electron Devices.

[11]  T. Rotter,et al.  Heterostructure field effect transistor types with novel gate dielectrics , 2001 .

[12]  G. Meneghesso,et al.  Systematic characterization of Cl2 reactive ion etching for gate recessing in AlGaN/GaN HEMTs , 2002, IEEE Electron Device Letters.

[13]  Y. Ikeda,et al.  Novel GaN-based MOS HFETs with thermally oxidized gate insulator , 2001, International Electron Devices Meeting. Technical Digest (Cat. No.01CH37224).