Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing

[1]  Yaxin Tao,et al.  Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement , 2022, Cement and Concrete Composites.

[2]  Yaxin Tao,et al.  Hydration re-initiation of borated CSA systems with a two-stage mixing process: An application in extrusion-based concrete 3D printing , 2022, Cement and Concrete Research.

[3]  G. Bai,et al.  Hardened properties of 3D printed concrete with recycled coarse aggregate , 2022, Cement and Concrete Research.

[4]  Yaxin Tao,et al.  Blending performance of helical static mixer used for twin-pipe 3D concrete printing , 2022, Cement and Concrete Composites.

[5]  Can Lin,et al.  Leveraging Internal Curing Effect of Fly Ash Cenosphere for Alleviating Autogenous Shrinkage in 3d Printing , 2022, SSRN Electronic Journal.

[6]  V. Mechtcherine,et al.  The realities of additively manufactured concrete structures in practice , 2022, Cement and Concrete Research.

[7]  Scott Z. Jones,et al.  Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development , 2022, Cement and Concrete Research.

[8]  R. Flatt,et al.  On sustainability and digital fabrication with concrete , 2022, Cement and Concrete Research.

[9]  J. Sanjayan,et al.  In-line activation of cementitious materials for 3D concrete printing , 2022, Cement and Concrete Composites.

[10]  R. Flatt,et al.  A chemical process engineering look at digital concrete processes: critical step design, inline mixing, and scaleup , 2022, Cement and Concrete Research.

[11]  Q. Zhang,et al.  Shotcrete based 3D concrete printing: State of art, challenges, and opportunities , 2022, Construction and Building Materials.

[12]  Yong Yuan,et al.  Mechanical and microstructural properties of 3D printable concrete in the context of the twin-pipe pumping strategy , 2021, Cement and Concrete Composites.

[13]  O. Matar,et al.  Current advances in liquid-liquid mixing in static mixers: A review , 2021, Chemical Engineering Research and Design.

[14]  J. Sanjayan,et al.  Technologies for improving buildability in 3D concrete printing , 2021 .

[15]  M. Tan,et al.  Investigation of interlayer adhesion of 3D printable cementitious material from the aspect of printing process , 2021 .

[16]  D. Stephan,et al.  Penetration test as a fast method to determine yield stress and structural build-up for 3D printing of cementitious materials , 2021 .

[17]  G. de Schutter,et al.  Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete , 2021 .

[18]  Yong Yuan,et al.  Stiffening control of cement-based materials using accelerators in inline mixing processes: Possibilities and challenges , 2021 .

[19]  M. Yardımcı,et al.  Quantitative assessment of the influence of external magnetic field on clustering of nano-Fe3O4 particles in cementitious paste , 2021, Cement and Concrete Research.

[20]  J. Sanjayan,et al.  Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing , 2020 .

[21]  J. Kruger,et al.  A compendious review on lack-of-fusion in digital concrete fabrication , 2020 .

[22]  Christoph Gehlen,et al.  Particle bed 3D printing by selective cement activation – Applications, material and process technology , 2020 .

[23]  Lex Reiter,et al.  Setting on demand for digital concrete – Principles, measurements, chemistry, validation , 2020 .

[24]  Q. Ran,et al.  Toward the viscosity reducing of cement paste: Optimization of the molecular weight of polycarboxylate superplasticizers , 2020 .

[25]  M. Santhanam,et al.  Evaluating the printability of concretes containing lightweight coarse aggregates , 2020 .

[26]  M. Santhanam,et al.  Mechanical characterization of 3D printable concrete , 2019, Construction and Building Materials.

[27]  Jacques Kruger,et al.  An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete , 2019, Construction and Building Materials.

[28]  Q. Yuan,et al.  Rheological behavior of Portland clinker-calcium sulphoaluminate clinker-anhydrite ternary blend , 2019, Cement and Concrete Composites.

[29]  Wei Chen,et al.  Experimental evidence on formation of ulexite in sulfoaluminate cement paste mixed with high concentration borate solution and its retarding effects , 2019, Construction and Building Materials.

[30]  Freek Bos,et al.  Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion , 2019, Cement and Concrete Research.

[31]  Yu Zhang,et al.  Rheological and harden properties of the high-thixotropy 3D printing concrete , 2019, Construction and Building Materials.

[32]  Nicolas Roussel,et al.  Rheological requirements for printable concretes , 2018, Cement and Concrete Research.

[33]  Sara Mantellato,et al.  Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry , 2018, Cement and Concrete Research.

[34]  Geert De Schutter,et al.  Vision of 3D printing with concrete — Technical, economic and environmental potentials , 2018, Cement and Concrete Research.

[35]  Wei Sun,et al.  The coupling effect of calcium concentration and pH on early hydration of cement , 2018, Construction and Building Materials.

[36]  Ye Qian,et al.  Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE) , 2018, Cement and Concrete Research.

[37]  Freek Bos,et al.  Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete , 2018, Construction and Building Materials.

[38]  Shucai Li,et al.  Grouting rock fractures with cement and sodium silicate grout , 2018, Carbonates and Evaporites.

[39]  V. Vaitkevičius,et al.  Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology , 2018 .

[40]  G. Ma,et al.  Printable properties of cementitious material containing copper tailings for extrusion based 3D printing , 2018 .

[41]  Freek Bos,et al.  Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing , 2018 .

[42]  Caijun Shi,et al.  Effect of constituents on rheological properties of fresh concrete-A review , 2017 .

[43]  Jiaping Liu,et al.  Influence of superplasticizer dosage on the viscosity of cement paste with low water-binder ratio , 2017 .

[44]  Kyong-Ku Yun,et al.  Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: The influences of silica fume and air-entraining agent , 2016 .

[45]  Stéphanie Staquet,et al.  Monitoring the setting process of mortars by ultrasonic P and S-wave transmission velocity measurement , 2015 .

[46]  B. Revel,et al.  Influence of sodium borate on the early age hydration of calcium sulfoaluminate cement , 2015 .

[47]  G. Sant,et al.  The influence of sodium and potassium hydroxide on alite hydration: Experiments and simulations , 2012 .

[48]  Milena Marroccoli,et al.  Discussion of the paper “Understanding expansion in calcium sulfoaluminate–belite cements” by I.A. Chen et al., Cem. Concr. Res. 42 (2012) 51–60 , 2012 .

[49]  T. T. Le,et al.  Mix design and fresh properties for high-performance printing concrete , 2012 .

[50]  N. Consoli,et al.  Fiber reinforcement effects on sand considering a wide cementation range , 2009 .

[51]  Robert J. Flatt,et al.  Yield Stress During Setting of Cement Pastes From Penetration Tests , 2009 .

[52]  Nele De Belie,et al.  Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity , 2008 .

[53]  R. Flatt,et al.  Yield Stress of Multimodal Powder Suspensions: An Extension of the YODEL (Yield Stress mODEL) , 2007 .

[54]  Christian U. Grosse,et al.  Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour , 2005 .

[55]  H. Reinhardt,et al.  Continuous monitoring of setting and hardening of mortar and concrete , 2004 .

[56]  G. de Schutter,et al.  Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content , 2021 .

[57]  Miguel A. G. Aranda,et al.  18 – Sulfoaluminate cement , 2013 .

[58]  M. Juenger,et al.  Understanding expansion in calcium sulfoaluminate–belite cements , 2012 .