Estimation of shrub biomass by airborne LiDAR data in small forest stands

Abstract The presence of shrub vegetation is very significant in Mediterranean ecosystems. However, the difficulty involved in shrub management and the lack of information about behavior of this vegetation means that these areas are often left out of spatial planning projects. Airborne LiDAR (Light Detection And Ranging) has been used successfully in forestry to estimate dendrometric and dasometric variables that allow to characterize forest structure. In contrast, little research has focused on shrub vegetation. The objective of this study was to estimate dry biomass of shrub vegetation in 83 stands of radius 0.5 m using variables derived from LiDAR data. Dominant species was Quercus coccifera , one of the most characteristic species of the Mediterranean forests. Density of LiDAR data in the analyzed stands varied from 2 points/m 2 to 16 points/m 2 , being the average 8 points/m 2 and the standard deviation 4.5 points/m 2 . Under these conditions, predictions of biomass were performed calculating the mean height, the maximum height and the percentile values 80th, 90th, and 95th derived from LiDAR in concentric areas whose radius varied from 0.50 m to 3.5 m from the center of the stand. The maximum R 2 and the minimum RMSE for dry biomass estimations were obtained when the percentile 95th of LiDAR data was calculated in an area of radius 1.5 m, being 0.48 and 1.45 kg, respectively. For this radius, it was found that for the stands ( n  = 39) where the DTM is calculated with high accuracy (RMSE lower than 0.20 m) and with a high density of LiDAR data (more than 8 points/m 2 ) the R 2 value was 0.73. These results show the possibility of estimating shrub biomass in small areas when the density of LiDAR data is high and errors associated to the DTM are low. These results would allow us to improve the knowledge about shrub behavior avoiding the cost of field measurements and clear cutting actions.

[1]  A. Hudak,et al.  Mapping snags and understory shrubs for a LiDAR-based assessment of wildlife habitat suitability , 2009 .

[2]  E. Næsset.  Accuracy of forest inventory using airborne laser scanning: evaluating the first nordic full-scale operational project , 2004 .

[3]  J. Hyyppä,et al.  Review of methods of small‐footprint airborne laser scanning for extracting forest inventory data in boreal forests , 2008 .

[4]  Fabio Castelli,et al.  Multiple attribute decision making for individual tree detection using high-resolution laser scanning , 2009 .

[5]  Laura Chasmer,et al.  Vegetation class dependent errors in lidar ground elevation and canopy height estimates in a boreal wetland environment , 2005 .

[6]  W. Cohen,et al.  Lidar Remote Sensing of the Canopy Structure and Biophysical Properties of Douglas-Fir Western Hemlock Forests , 1999 .

[7]  Ross A. Hill,et al.  Mapping woodland species composition and structure using airborne spectral and LiDAR data , 2005 .

[8]  S. Ustin,et al.  Estimation of shrub height for fuel-type mapping combining airborne LiDAR and simultaneous color infrared ortho imaging , 2007 .

[9]  Ross Nelson,et al.  Estimating forest biomass and volume using airborne laser data , 1988 .

[10]  N. Glenn,et al.  LiDAR measurement of sagebrush steppe vegetation heights , 2006 .

[11]  S. Popescu,et al.  Sensitivity analysis of fire behavior modeling with LIDAR-derived surface fuel maps , 2008 .

[12]  E. Bork,et al.  Integrating LIDAR data and multispectral imagery for enhanced classification of rangeland vegetation: A meta analysis , 2007 .

[13]  R. Hill,et al.  Quantifying canopy height underestimation by laser pulse penetration in small-footprint airborne laser scanning data , 2003 .

[14]  J. Hyyppä,et al.  Estimation of timber volume and stem density based on scanning laser altimetry and expected tree size distribution functions , 2004 .

[15]  I. Stupak,et al.  Above-ground biomass functions for Scots pine in Lithuania. , 2007 .

[16]  Richard G. Oderwald,et al.  Forest Volume and Biomass Estimation Using Small-Footprint Lidar-Distributional Parameters on a Per-Segment Basis , 2006 .

[17]  Borja Velázquez-Martí,et al.  Dendrometric and dasometric analysis of the bushy biomass in Mediterranean forests , 2010 .

[18]  Edward W. Bork,et al.  Characterization of diverse plant communities in Aspen Parkland rangeland using LiDAR data , 2007 .

[19]  Dirk Pflugmacher,et al.  Distinguishing between live and dead standing tree biomass on the North Rim of Grand Canyon National Park, USA using small-footprint lidar data , 2009 .

[20]  J. Hyyppä,et al.  DETECTING AND ESTIMATING ATTRIBUTES FOR SINGLE TREES USING LASER SCANNER , 2006 .

[21]  Edward W. Bork,et al.  Influence of Vegetation, Slope, and Lidar Sampling Angle on DEM Accuracy , 2006 .

[22]  Thomas R. Crow,et al.  Estimating aboveground biomass using Landsat 7 ETM+ data across a managed landscape in northern Wisconsin, USA , 2004 .

[23]  Warren B. Cohen,et al.  Object-based semi-automatic approach for forest structure characterization using lidar data in heterogeneous Pinus sylvestris stands. , 2008 .

[24]  Patrick D. Gerard,et al.  Characterizing vertical forest structure using small-footprint airborne LiDAR , 2003 .

[25]  Arthur Cronquist,et al.  Floristic Regions of the World , 1978 .

[26]  Kaiguang Zhao,et al.  Ground Filtering Algorithms for Airborne LiDAR Data: A Review of Critical Issues , 2010, Remote. Sens..

[27]  Jacob T. Mundt,et al.  Mapping Sagebrush Distribution Using Fusion of Hyperspectral and Lidar Classifications , 2006 .

[28]  Ross Nelson,et al.  Measuring biomass and carbon in delaware using an airborne profiling LIDAR , 2004 .

[29]  I. Burke,et al.  Estimating stand structure using discrete-return lidar: an example from low density, fire prone ponderosa pine forests , 2005 .

[30]  S. Reutebuch,et al.  Estimating forest canopy fuel parameters using LIDAR data , 2005 .

[31]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[32]  William P. Kustas,et al.  Morphological characteristics of shrub coppice dunes in desert grasslands of southern New Mexico derived from scanning LIDAR. , 2000 .

[33]  F. M. Danson,et al.  Estimating biomass carbon stocks for a Mediterranean forest in central Spain using LiDAR height and intensity data , 2010 .

[34]  Luis Ángel Ruiz Fernández,et al.  Study of Shrub Cover and Height Using LIDAR Data in a Mediterranean Area , 2011, Forest Science.

[35]  Randolph H. Wynne,et al.  Estimating plot-level tree heights with lidar : local filtering with a canopy-height based variable window size , 2002 .

[36]  S. Popescu.  Estimating biomass of individual pine trees using airborne lidar , 2007 .

[37]  J. Holmgren,et al.  Estimation of Tree Height and Stem Volume on Plots Using Airborne Laser Scanning , 2003, Forest Science.

[38]  H. Andersen,et al.  A Comparison of Statistical Methods for Estimating Forest Biomass from Light Detection and Ranging Data , 2008 .

[39]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[40]  J. K. Hiers,et al.  Ground-based LIDAR: a novel approach to quantify fine-scale fuelbed characteristics , 2009 .