Constitutive analysis of 6013 aluminum alloy in hot plane strain compression process considering deformation heating integrated with heat transfer

[1]  Hong-Bin Li,et al.  New constitutive model for high-temperature deformation behavior of inconel 718 superalloy , 2015 .

[2]  M. Mazinani,et al.  Strain-dependent constitutive modelling of AZ80 magnesium alloy containing 0.5 wt% rare earth elements and evaluation of its validation using finite element method , 2014, Metals and Materials International.

[3]  C. Park,et al.  Integrated constitutive model for flow behavior of pure Titanium considering interstitial solute concentration , 2014, Metals and Materials International.

[4]  S. Discetti,et al.  Heat transfer enhancement of impinging jets with fractal-generated turbulence , 2014 .

[5]  Y. Lin,et al.  Constitutive models for high-temperature flow behaviors of a Ni-based superalloy , 2014 .

[6]  H. Lee,et al.  Evaluation of flow stress and damage index at large plastic strain by simulating tensile test of Al6061 plates with various grain sizes , 2014 .

[7]  L. Zuo,et al.  Hot deformation and processing maps of DC cast Al-15%Si alloy , 2013 .

[8]  F. Bedir.  Modeling approach and plastic deformation analysis of 6063 aluminum alloy during compression at elevated temperatures , 2013 .

[9]  Hui Zhang,et al.  Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression , 2013 .

[10]  Amit Kumar Maheshwari,et al.  Prediction of flow stress for hot deformation processing , 2013 .

[11]  Yu-hao Cao,et al.  Constitutive analysis of the hot deformation behavior of Fe–23Mn–2Al–0.2C twinning induced plasticity steel in consideration of strain , 2013 .

[12]  S. Abbasi,et al.  Constitutive analysis and processing map for hot working of a Ni-Cu alloy , 2013, Metals and Materials International.

[13]  Tongsheng Deng,et al.  Constitutive modeling and microstructure change of Ti–6Al–4V during the hot tensile deformation , 2012 .

[14]  M. Kazeminezhad,et al.  Hot deformation behavior of hot extruded Al–6Mg alloy , 2012 .

[15]  Y. C. Lin,et al.  A phenomenological constitutive model for high temperature flow stress prediction of Al–Cu–Mg alloy , 2012 .

[16]  Y. Lin,et al.  A critical review of experimental results and constitutive descriptions for metals and alloys in hot working , 2011 .

[17]  R. H. Wagoner,et al.  A plastic constitutive equation incorporating strain, strain-rate, and temperature , 2010 .

[18]  Hui Zhang,et al.  Flow stress equation of AZ31 magnesium alloy sheet during warm tensile deformation , 2008 .

[19]  S. Spigarelli,et al.  Study of hot workability of a heat treated AA6082 aluminum alloy , 2003 .

[20]  H. J. McQueen,et al.  Constitutive analysis in hot working , 2002 .

[21]  S. Semiatin,et al.  The adiabatic correction factor for deformation heating during the uniaxial compression test , 2001 .

[22]  I. V. Samarasekera,et al.  The thermal and metallurgical state of steel strip during hot rolling: Part II. Factors influencing rolling loads , 1991 .

[23]  V. Jain.  Determination of heat transfer coefficient for forging applications , 1990 .

[24]  J. Klepaczko.  A practical stress-strain-strain rate-temperature constitutive relation of the power form , 1987 .

[25]  J. R. Klepaczko,et al.  Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress , 2001 .