Acoustic and economic analysis of the use of palm tree pruning waste in noise barriers to mitigate the environmental impact of motorways.

This research has a twofold environmental benefit. On the one hand, there is the recycling of a waste by-product and, on the other hand, the reduction of traffic noise pollution levels. The objective of this study is to determine and evaluate the use of a mixture of shredded palm tree pruning waste with dampened topsoil in the construction of noise barriers. With a view to efficiently recycling pruning waste and using an environmentally-friendly material which does not pose any environmental risks at the end of its useful life, the composition offering the best sound absorption has been analyzed. Based on the results obtained, a completely eco-friendly roadside noise barrier (RNB) 1:1 scale model was built, and noise levels measured at various points close to it. Significant sound absorption benefits were detected, not only in the shaded area behind the barrier, but also in the unprotected area immediately above the barrier. Furthermore, the economic feasibility of both the construction and recycling processes has been calculated.

[1]  C. Cianfrini,et al.  Experimental verification of the acoustic performance of diffusive roadside noise barriers , 2007 .

[2]  Kyoji Fujiwara,et al.  Noise control by barriers—Part 2: Noise reduction by an absorptive barrier☆ , 1977 .

[3]  Benz Kotzen,et al.  Environmental Noise Barriers: A Guide to their Acoustic and Visual Design , 1999 .

[4]  Kyoji Fujiwara,et al.  Performance of noise barriers with various edge shapes and acoustical conditions , 2004 .

[5]  Tomas Gil-Lopez,et al.  Influence of double glazing with a circulating water chamber on the thermal energy savings in buildings , 2013 .

[6]  Hans Bendtsen.  VISUAL PRINCIPLES FOR THE DESIGN OF NOISE BARRIERS , 1989 .

[7]  Yiu W. Lam,et al.  Performance of profiled single noise barriers covered with quadratic residue diffusers , 2005 .

[8]  Greg Watts,et al.  THE EFFECTS OF VEGETATION ON THE PERCEPTION OF TRAFFIC NOISE , 1999 .

[9]  Simon N. Chandler-Wilde,et al.  THE PERFORMANCE OF T-PROFILE AND ASSOCIATED NOISE BARRIERS , 1991 .

[10]  Krishan Kumar,et al.  A study of the spectral characteristics of traffic noise attenuation by vegetation belts in Delhi , 2006 .

[11]  Tomas Gil-Lopez,et al.  Energetic, environmental and economic analysis of climatic separation by means of air curtains in cold storage rooms , 2014 .

[12]  G. R. Watts,et al.  Effects on roadside noise levels of sound absorptive materials in noise barriers , 1999 .

[13]  Crina Oltean-Dumbrava,et al.  Assessment and relative sustainability of common types of roadside noise barriers , 2016 .

[14]  D. Botteldooren,et al.  Road traffic noise shielding by vegetation belts of limited depth , 2012 .

[15]  L. Brown,et al.  Burden of disease from environmental noise: Quantification of healthy life years lost in Europe , 2011 .

[16]  D. Botteldooren,et al.  On the choice between walls and berms for road traffic noise shielding including wind effects , 2012 .

[17]  Katsuhiro Iida,et al.  RESEARCH ON A DEVICE FOR REDUCING NOISE , 1984 .

[18]  Keiichiro Mizuno,et al.  Research on a Noise Control Device : 1st Report, Fundamental Principle of the Device , 1984 .

[19]  Tomas Gil-Lopez,et al.  Energy, environmental and economic analysis of the ventilation system of enclosed parking garages: Discrepancies with the current regulations , 2014 .

[20]  L. Huddart.  THE USE OF VEGETATION FOR TRAFFIC NOISE SCREENING , 1990 .

[21]  Simon N. Chandler-Wilde,et al.  Multiple-edge noise barriers , 1995 .

[22]  Tomas Gil-Lopez,et al.  Analysis of carbon impact using mix energy sources for industrial heating applications. An assessment of options to refit services in an existing building , 2012 .

[23]  H Shima.  NOISE REDUCTION OF A MULTIPLE EDGE NOISE BARRIER. , 1996 .

[24]  Héctor Cifuentes,et al.  Use of co-combustion bottom ash to design an acoustic absorbing material for highway noise barriers. , 2013, Waste management.

[25]  G. R. Watts.  ACOUSTIC PERFORMANCE OF NEW DESIGNS OF TRAFFIC NOISE BARRIERS , 1993 .

[26]  Sabih I. Hayek,et al.  Mathematical modeling of absorbent highway noise barriers , 1990 .

[27]  B. Berglund,et al.  Guidelines for community noise , 1999 .

[28]  J. Jeon,et al.  The effects of audio-visual factors on perceptions of environmental noise barrier performance , 2014 .

[29]  Jorge P. Arenas,et al.  Modification of the Diffracted Sound Field by Some Noise Barrier Edge Designs , 2001 .

[30]  Tomas Gil-Lopez,et al.  Environmental, economic and energy analysis of double glazing with a circulating water chamber in residential buildings , 2013 .

[31]  M. Hodgson,et al.  Scale-model study of the effectiveness of highway noise barriers. , 2003, The Journal of the Acoustical Society of America.

[32]  J. P. Arenas,et al.  Potential problems with environmental sound barriers when used in mitigating surface transportation noise. , 2008, The Science of the total environment.

[33]  Kyoji Fujiwara,et al.  Sound shielding efficiency of a barrier with a cylinder at the edge , 1991 .

[34]  D. N. May,et al.  Highway noise barriers: new shapes , 1980 .

[35]  U. Lemmin,et al.  Means of noise reduction in acoustic turbulence measurements , 2006 .

[36]  Kyoji Fujiwara,et al.  EFFICIENCY OF A NOISE BARRIER ON THE GROUND WITH AN ACOUSTICALLY SOFT CYLINDRICAL EDGE , 1998 .

[37]  G. R. Watts.  Acoustic Performance of a Multiple Edge Noise Barrier Profile at Motorway Sites , 1996 .