Multi-scale microstructural development and mechanical properties of a selectively laser melted beta titanium alloy

[1]  T. Nakano,et al.  Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders , 2019, Materials & Design.

[2]  M. Matthews,et al.  Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response , 2019, JOM.

[3]  Lai‐Chang Zhang,et al.  Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting , 2019, Materialia.

[4]  Jun Sun,et al.  Origin of the ductile-to-brittle transition of metastable β-titanium alloys: Self-hardening of ω-precipitates , 2019, Acta Materialia.

[5]  Matthew S. Dargusch,et al.  Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing , 2019, Acta Materialia.

[6]  Hao Zhao,et al.  On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing , 2019, Acta Materialia.

[7]  Mark F. Horstemeyer,et al.  Insight into the mechanisms of columnar to equiaxed grain transition during metallic additive manufacturing , 2019, Additive Manufacturing.

[8]  Libo Zhou,et al.  Densification, microstructure evolution and fatigue behavior of Ti-13Nb-13Zr alloy processed by selective laser melting , 2019, Powder Technology.

[9]  X. Dong,et al.  Grain refinement and excellent mechanical properties of a Ti-based alloy via laser melting and subsequent low temperature annealing , 2018, Materials Science and Engineering: A.

[10]  Libo Zhou,et al.  Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting , 2018, Journal of Alloys and Compounds.

[11]  Norbert Schell,et al.  Peritectic titanium alloys for 3D printing , 2018, Nature Communications.

[12]  Chao Chen,et al.  Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting , 2018 .

[13]  C. Qiu,et al.  A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel , 2018, Scientific Reports.

[14]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[15]  Qingqing Ding,et al.  Dislocation network in additive manufactured steel breaks strength–ductility trade-off , 2017 .

[16]  M. Brandt,et al.  In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance , 2017 .

[17]  Xin Lin,et al.  Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy , 2016 .

[18]  J. Eckert,et al.  Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting , 2016 .

[19]  Xin Lin,et al.  Solidification Microstructure of Laser Additive Manufactured Ti6Al2Zr2Sn3Mo1.5Cr2Nb Titanium Alloy , 2016 .

[20]  Yufeng Zheng,et al.  The role of the ω phase on the non-classical precipitation of the α phase in metastable β-titanium alloys , 2016 .

[21]  Yufeng Zheng,et al.  Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys , 2016 .

[22]  Yufeng Zheng,et al.  The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys , 2016 .

[23]  Shuai Shao,et al.  Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring , 2016, JOM.

[24]  Rainer J. Hebert,et al.  Viewpoint: metallurgical aspects of powder bed metal additive manufacturing , 2016, Journal of Materials Science.

[25]  Moataz M. Attallah,et al.  Microstructural control during direct laser deposition of a β-titanium alloy , 2015 .

[26]  Yanyan Zhu,et al.  Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing , 2015 .

[27]  Ma Qian,et al.  Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition , 2015 .

[28]  C. Tuck,et al.  Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V , 2014 .

[29]  H. M. Wang,et al.  Obtaining bimodal microstructure in laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy , 2014 .

[30]  Philip B. Prangnell,et al.  Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting , 2013 .

[31]  Arun Devaraj,et al.  Alpha phase precipitation from phase-separated beta phase in a model Ti–Mo–Al alloy studied by direct coupling of transmission electron microscopy and atom probe tomography , 2013 .

[32]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[33]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[34]  Raghavan Srinivasan,et al.  Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys , 2012 .

[35]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[36]  H. Fraser,et al.  ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy , 2009 .

[37]  M. Martorano,et al.  Predicting the columnar-to-equiaxed transition for a distribution of nucleation undercoolings , 2009 .

[38]  C. Beckermann,et al.  Phase-field simulation of the columnar-to-equiaxed transition in alloy solidification , 2006 .

[39]  Peter D. Lee,et al.  Simulation of the columnar-to-equiaxed transition in directionally solidified Al-Cu alloys , 2005 .

[40]  J. Mei,et al.  Microstructure and properties of a laser fabricated burn-resistant Ti alloy , 2004 .

[41]  S. L. Semiatin,et al.  The laser additive manufacture of Ti-6Al-4V , 2001 .

[42]  L. Nastac.  Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloys , 1999 .

[43]  C. Gandin,et al.  A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes , 1994 .

[44]  Christoph Beckermann,et al.  Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification , 1994 .

[45]  J. Hunt,et al.  Steady state columnar and equiaxed growth of dendrites and eutectic , 1984 .