A RuO2 nanoparticle-decorated buckypaper cathode for non-aqueous lithium–oxygen batteries

We report a non-aqueous lithium–oxygen battery with its cathode made of a RuO2 nanoparticle-decorated buckypaper (weaved with carbon nanotubes). Compared with conventional slurry-formed cathodes, the present cathode has two striking features: (i) no binder is required, avoiding the problems of surface-loss and instability due to the introduction of a polymeric binder, and (ii) no additional current collector is needed, increasing the practical specific capacity. The present battery demonstrates a discharge plateau of 2.56 V and a charge plateau of 4.10 V at a current density of 0.4 mA cm−2, with a discharge capacity of 4.72 mA h cm−2 (1150 mA h gcathode−1). It is also shown that at a fixed capacity of 2.0 mA h cm−2, the energy efficiency of the battery reaches 71.2%, 65.4%, and 58.0% at a current density of 0.2, 0.4, and 0.8 mA cm−2, respectively. Furthermore, the battery is able to operate for 50 cycles at a fixed capacity of 1.0 mA h cm−2, showing its good cycling stability. The results suggest that the RuO2 nanoparticle-decorated buckypaper cathode offers promise for a high-practical specific capacity, high-energy efficiency, and stable electrode for non-aqueous lithium–oxygen batteries.

[1]  T. Gustafsson,et al.  Pt/α-MnO2 nanotube: A highly active electrocatalyst for Li–O2 battery , 2014 .

[2]  Jim P. Zheng,et al.  Theoretical Energy Density of Li–Air Batteries , 2008 .

[3]  Kai Xie,et al.  Investigation of oxygen reduction chemistry in ether and carbonate based electrolytes for Li–O2 batteries , 2012 .

[4]  S. Ramakrishna,et al.  Controlled synthesis of porous spinel cobaltite core-shell microspheres as high-performance catalysts for rechargeable Li–O2 batteries , 2015 .

[5]  Bing Li,et al.  Co3O4 nanoparticles decorated carbon nanofiber mat as binder-free air-cathode for high performance rechargeable zinc-air batteries. , 2015, Nanoscale.

[6]  Ji‐Guang Zhang,et al.  Dendrimer‐Encapsulated Ruthenium Oxide Nanoparticles as Catalysts in Lithium‐Oxygen Batteries , 2014 .

[7]  Jun Lu,et al.  The effect of oxygen crossover on the anode of a Li-O(2) battery using an ether-based solvent: insights from experimental and computational studies. , 2013, ChemSusChem.

[8]  Yongyao Xia,et al.  Synthesis of ruthenium oxide coated ordered mesoporous carbon nanofiber arrays as a catalyst for lithium oxygen battery , 2015 .

[9]  Kyeongse Song,et al.  Ultra-low overpotential and high rate capability in Li–O2 batteries through surface atom arrangement of PdCu nanocatalysts , 2014 .

[10]  Liquan Chen,et al.  Graphene–Co3O4 nanocomposite as an efficient bifunctional catalyst for lithium–air batteries , 2014 .

[11]  J. Nørskov,et al.  Electrical conductivity in Li2O2 and its role in determining capacity limitations in non-aqueous Li-O2 batteries. , 2011, The Journal of chemical physics.

[12]  Dan Xu,et al.  3D ordered macroporous LaFeO3 as efficient electrocatalyst for Li–O2 batteries with enhanced rate capability and cyclic performance , 2014 .

[13]  Wei Shyy,et al.  What is the ideal distribution of electrolyte inside cathode pores of non-aqueous lithium–air batteries? , 2015 .

[14]  V. Viswanathan,et al.  Trade-Offs in Capacity and Rechargeability in Nonaqueous Li-O2 Batteries: Solution-Driven Growth versus Nucleophilic Stability. , 2015, The journal of physical chemistry letters.

[15]  Zhang Zhang,et al.  The First Introduction of Graphene to Rechargeable Li-CO2 Batteries. , 2015, Angewandte Chemie.

[16]  Wei Shyy,et al.  A carbon powder-nanotube composite cathode for non-aqueous lithium-air batteries , 2014 .

[17]  Tianshou Zhao,et al.  A non-carbon cathode electrode for lithium–oxygen batteries , 2014 .

[18]  Wei Shyy,et al.  Discharge product morphology versus operating temperature in non-aqueous lithium-air batteries , 2015 .

[19]  H. Byon,et al.  Promoting formation of noncrystalline Li2O2 in the Li-O2 battery with RuO2 nanoparticles. , 2013, Nano letters.

[20]  Yang Shao-Horn,et al.  Lithium–oxygen batteries: bridging mechanistic understanding and battery performance , 2013 .

[21]  Linda F. Nazar,et al.  A highly active nanostructured metallic oxide cathode for aprotic Li–O2 batteries , 2015 .

[22]  Limin Wang,et al.  Freestanding MnO2@carbon papers air electrodes for rechargeable Li-O2 batteries , 2014 .

[23]  Stefan A Freunberger,et al.  The carbon electrode in nonaqueous Li-O2 cells. , 2013, Journal of the American Chemical Society.

[24]  Jonathon R. Harding,et al.  In Situ Ambient Pressure X-ray Photoelectron Spectroscopy Studies of Lithium-Oxygen Redox Reactions , 2012, Scientific Reports.

[25]  B. McCloskey,et al.  Lithium−Air Battery: Promise and Challenges , 2010 .

[26]  Xuemei Li,et al.  Nanosized Mn–Ru binary oxides as effective bifunctional cathode electrocatalysts for rechargeable Li–O2 batteries , 2014 .

[27]  M. Salomon,et al.  Li-air batteries: A classic example of limitations owing to solubilities , 2007 .

[28]  D. Rolison,et al.  Carbon Nanofoam-Based Cathodes for Li–O2 Batteries: Correlation of Pore–Solid Architecture and Electrochemical Performance , 2013 .

[29]  Zhen Zhou,et al.  Co3O4 Hollow Nanoparticles and Co Organic Complexes Highly Dispersed on N‐Doped Graphene: An Efficient Cathode Catalyst for Li‐O2 Batteries , 2015 .

[30]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[31]  Zhen Zhou,et al.  Two better than one: cobalt–copper bimetallic yolk–shell nanoparticles supported on graphene as excellent cathode catalysts for Li–O2 batteries , 2015 .

[32]  Wei Shyy,et al.  Prediction of the theoretical capacity of non-aqueous lithium-air batteries , 2013 .

[33]  K. Kang,et al.  The potential for long-term operation of a lithium-oxygen battery using a non-carbonate-based electrolyte. , 2012, Chemical communications.

[34]  Zhe Hu,et al.  Size effect of lithium peroxide on charging performance of Li-O2 batteries. , 2014, Nanoscale.

[35]  T. Ohno,et al.  Li2O2 Wetting on the (110) Surface of RuO2, TiO2, and SnO2: An Initiating Force for Polycrystalline Growth , 2015 .

[36]  B. McCloskey,et al.  An electrochemical impedance spectroscopy investigation of the overpotentials in Li-O2 batteries. , 2015, ACS applied materials & interfaces.

[37]  Li Li,et al.  Aprotic and aqueous Li-O₂ batteries. , 2014, Chemical reviews.

[38]  Zhen-tao Zhou,et al.  Computational Insights into Oxygen Reduction Reaction and Initial Li2O2 Nucleation on Pristine and N-Doped Graphene in Li–O2 Batteries , 2015 .

[39]  S. Krivovichev,et al.  Earth's Phosphides in Levant and insights into the source of Archean prebiotic phosphorus , 2015, Scientific Reports.

[40]  Tao Zhang,et al.  Challenges of non-aqueous Li–O2 batteries: electrolytes, catalysts, and anodes , 2013 .

[41]  Dmitri Golberg,et al.  Multi-walled carbon nanotube papers as binder-free cathodes for large capacity and reversible non-aqueous Li–O2 batteries , 2013 .

[42]  Kishan Dholakia,et al.  The role of LiO2 solubility in O2 reduction in aprotic solvents and its consequences for Li-O2 batteries. , 2014, Nature chemistry.

[43]  Linda F. Nazar,et al.  Screening for superoxide reactivity in Li-O2 batteries: effect on Li2O2/LiOH crystallization. , 2012, Journal of the American Chemical Society.

[44]  Yang Shao-Horn,et al.  Mechanisms of Morphological Evolution of Li2O2 Particles during Electrochemical Growth. , 2013, The journal of physical chemistry letters.

[45]  Dan Zhao,et al.  Reversibility of anodic lithium in rechargeable lithium–oxygen batteries , 2013, Nature Communications.

[46]  Yun‐Sung Lee,et al.  Sea Urchin Shaped α-MnO2/RuO2 Mixed Oxides Nanostructure as Promising Electrocatalyst for Lithium–Oxygen Battery , 2015 .

[47]  Liquan Chen,et al.  Flowerlike Co3O4 microspheres loaded with copper nanoparticle as an efficient bifunctional catalyst for lithium–air batteries , 2013 .

[48]  T. Zhao,et al.  A gradient porous cathode for non-aqueous lithium-air batteries leading to a high capacity , 2014 .

[49]  Yang Shao-Horn,et al.  Influence of Li2O2 morphology on oxygen reduction and evolution kinetics in Li–O2 batteries , 2013 .

[50]  Venkatasubramanian Viswanathan,et al.  Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li-O₂ batteries. , 2015, Nature chemistry.

[51]  Zhen Zhou,et al.  Hierarchical Carbon–Nitrogen Architectures with Both Mesopores and Macrochannels as Excellent Cathodes for Rechargeable Li–O2 Batteries , 2014 .

[52]  Soo-Jin Park,et al.  Optimization of Carbon‐ and Binder‐Free Au Nanoparticle‐Coated Ni Nanowire Electrodes for Lithium‐Oxygen Batteries , 2015 .

[53]  Zhaolin Liu,et al.  Porous cobalt-manganese oxide nanocubes derived from metal organic frameworks as a cathode catalyst for rechargeable Li-O2 batteries. , 2015, Nanoscale.

[54]  H. Yadegari,et al.  Three-dimensional MnO2 ultrathin nanosheet aerogels for high-performance Li–O2 batteries , 2015 .

[55]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[56]  Liquan Chen,et al.  Perovskite Sr0.95Ce0.05CoO3−δ loaded with copper nanoparticles as a bifunctional catalyst for lithium-air batteries , 2012 .

[57]  Z. Wen,et al.  Open mesoporous spherical shell structured Co3O4 with highly efficient catalytic performance in Li–O2 batteries , 2015 .

[58]  Z. Wen,et al.  A free-standing-type design for cathodes of rechargeable Li–O2 batteries , 2011 .

[59]  Ping He,et al.  Core-shell-structured CNT@RuO(2) composite as a high-performance cathode catalyst for rechargeable Li-O(2) batteries. , 2014, Angewandte Chemie.

[60]  Y. Park,et al.  Buckypaper electrode containing carbon nanofiber/Co3O4 composite for enhanced lithium air batteries , 2014 .

[61]  Ben Wang,et al.  Lithium–Air Batteries Using SWNT/CNF Buckypapers as Air Electrodes , 2010 .

[62]  Fanhao Meng,et al.  Positive role of surface defects on carbon nanotube cathodes in overpotential and capacity retention of rechargeable lithium-oxygen batteries. , 2014, ACS applied materials & interfaces.