Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power.

We analyze the scalability of diffraction-limited fiber lasers considering thermal, non-linear, damage and pump coupling limits as well as fiber mode field diameter (MFD) restrictions. We derive new general relationships based upon practical considerations. Our analysis shows that if the fiber's MFD could be increased arbitrarily, 36 kW of power could be obtained with diffraction-limited quality from a fiber laser or amplifier. This power limit is determined by thermal and non-linear limits that combine to prevent further power scaling, irrespective of increases in mode size. However, limits to the scaling of the MFD may restrict fiber lasers to lower output powers.

[1]  R. Smith.  Optical power handling capacity of low loss optical fibers as determined by stimulated Raman and brillouin scattering. , 1972, Applied optics.

[2]  R. Stolen,et al.  Raman Oscillation in Glass Optical Waveguide , 1972 .

[3]  R. Stolen,et al.  Raman gain in glass optical waveguides , 1973 .

[4]  Dietrich Marcuse,et al.  Field deformation and loss caused by curvature of optical fibers , 1976 .

[5]  M. Feit,et al.  Computation of mode properties in optical fiber waveguides by a propagating beam method. , 1980, Applied optics.

[6]  John A. Caird,et al.  Spectroscopic, optical, and thermomechanical properties of neodymium- and chromium-doped gadolinium scandium gallium garnet , 1986 .

[7]  Raman Kashyap,et al.  Observation of catastrophic self-propelled self-focusing in optical fibres , 1988 .

[8]  Kazimierz Jędrzejewski,et al.  Q-switched neodymium-doped phosphate glass fiber lasers , 1993 .

[9]  L. Zenteno,et al.  High-power double-clad fiber lasers , 1993 .

[10]  D. Hanna,et al.  Ytterbium-doped silica fiber lasers: versatile sources for the 1-1.2 /spl mu/m region , 1995 .

[11]  A A Said,et al.  Measurement of the optical damage threshold in fused quartz. , 1995, Applied optics.

[12]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.

[13]  R. Beach.  CW Theory of quasi-three level end-pumped laser oscillators , 1996 .

[14]  D. Hanna,et al.  Ytterbium-doped fiber amplifiers , 1997 .

[15]  D. Hanna,et al.  Lifetime quenching in Yb-doped fibres , 1997 .

[16]  M. A. Basurto-Pensado,et al.  Stimulated Raman scattering in a fiber with bending loss , 1999 .

[17]  Ajoy Ghatak,et al.  Design of a waveguide refractive index profile to obtain a flat modal field , 1999, Other Conferences.

[18]  D J Richardson,et al.  Comparative study of large-mode holey and conventional fibers. , 2001, Optics letters.

[19]  P. Andrekson,et al.  Increase of the SBS threshold in a short highly nonlinear fiber by applying a temperature distribution , 2001 .

[20]  David C. Brown,et al.  Thermal, stress, and thermo-optic effects in high average power double-clad silica fiber lasers , 2001 .

[21]  Yong Wang,et al.  Thermal effects in kilowatt fiber lasers , 2004 .

[22]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[23]  V. Kermene,et al.  Coherent combining in an Yb doped double core fiber laser , 2005, (CLEO). Conference on Lasers and Electro-Optics, 2005..

[24]  Sheng-Ping Chen,et al.  Branch arm filtered coherent combining of tunable fiber lasers. , 2005, Optics express.

[25]  Almantas Galvanauskas,et al.  High-energy and high-peak-power nanosecond pulse generation with beam quality control in 200-microm core highly multimode Yb-doped fiber amplifiers. , 2005, Optics letters.

[26]  C.T. Harris,et al.  High-brightness slab-coupled optical waveguide laser arrays , 2005, IEEE Photonics Technology Letters.

[27]  Jens Limpert,et al.  The renaissance and bright future of fibre lasers , 2005 .

[28]  D N Payne,et al.  Single-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output power. , 2005, Optics letters.

[29]  J. Fini,et al.  Bend-compensated design of large-mode-area fibers. , 2006, Optics letters.

[30]  P. Russell,et al.  Photonic Crystal Fibers , 2003, Science.

[31]  J. Fini.  Bend-resistant design of conventional and microstructure fibers with very large mode area. , 2006, Optics express.

[32]  J W Nicholson,et al.  Light propagation with ultralarge modal areas in optical fibers. , 2006, Optics letters.

[33]  Jun Li,et al.  Leakage channel optical fibers with large effective area , 2007 .

[34]  Anping Liu,et al.  Spectrally Beam-Combined Fiber Lasers for High-Average-Power Applications , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[35]  A. Gavrielides,et al.  Coherent combining of spectrally broadened fiber lasers. , 2007, Optics express.

[36]  G. Mourou,et al.  Generation of hard X-rays using an ultrafast fiber laser system. , 2007, Optics express.

[37]  Tso Yee Fan,et al.  Beam combining of ytterbium fiber amplifiers (Invited) , 2007 .

[38]  J. Knight,et al.  Photonic crystal fibers and fiber lasers (Invited) , 2007 .

[39]  R. Schermer,et al.  Mode scalability in bent optical fibers. , 2007, Optics express.

[40]  J. Limpert,et al.  The Rising Power of Fiber Lasers and Amplifiers , 2007, IEEE Journal of Selected Topics in Quantum Electronics.