Advances in Transmission Electron Microscopy: In Situ Straining and In Situ Compression Experiments on Metallic Glasses

In the field of transmission electron microscopy (TEM), fundamental and practical reasons still remain that hamper a straightforward correlation between microscopic structural information and deformation mechanisms in materials. In this article, it is argued that one should focus in particular on in situ rather than on postmortem observations of the microstructure. This viewpoint has been exemplified with in situ straining and in situ compression studies on metallic glasses. In situ TEM straining of amorphous metals permits an evaluation of the thickness of the liquid-like layer (LLL) formed because of heat evolution after shear band development. The experimental evaluation confirms that the thickness of a LLL present at the last moment of fracture substantially exceeds the generally accepted thickness of a shear band. In situ TEM and in situ SEM compression experiments on metallic glass pillars lead to the conclusion that smaller sized pillars deform more homogeneously than larger sized pillars. Microsc. Res. Tech. 72:250-260, 2009. (C) 2009 Wiley-Liss. Inc.

[1]  Douglas C. Hofmann,et al.  Designing metallic glass matrix composites with high toughness and tensile ductility , 2008, Nature.

[2]  J. Eckert,et al.  Difference in compressive and tensile fracture mechanisms of Zr59CU20Al10Ni8Ti3 bulk metallic glass , 2003 .

[3]  W. Johnson,et al.  New features of the low temperature ductile shear failure observed in bulk amorphous alloys , 2000 .

[4]  M. Gao,et al.  Deformation-Induced Nanocrystal Precipitation in Al-Base Metallic Glasses , 2001 .

[5]  W. Johnson,et al.  Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures , 2003 .

[6]  A. Argon,et al.  Development of visco-plastic deformation in metallic glasses , 1983 .

[7]  A. Minor,et al.  A new view of the onset of plasticity during the nanoindentation of aluminium , 2006, Nature materials.

[8]  T. Nieh,et al.  Sample size effect and microcompression of Mg65Cu25Gd10 metallic glass , 2007 .

[9]  A. Hamza,et al.  Ductile crystalline–amorphous nanolaminates , 2007, Proceedings of the National Academy of Sciences.

[10]  K. Han,et al.  Deformation and evolution of shear bands under compressive loading in bulk metallic glasses , 2006 .

[11]  W. Johnson,et al.  Effect of Oxygen Impurity on Crystallization of an Undercooled Bulk Glass Forming Zr–Ti–Cu–Ni–Al Alloy , 1997 .

[12]  J. Lewandowski,et al.  Local temperature rises during mechanical testing of metallic glasses , 2007 .

[13]  J. Hosson,et al.  In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon , 2006 .

[14]  A. Minor,et al.  Incipient plasticity in metallic thin films , 2007 .

[15]  D. Kim,et al.  The effect of Sn addition on the glass-forming ability of Cu–Ti–Zr–Ni–Si metallic glass alloys , 2002 .

[16]  Frans Spaepen,et al.  A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .

[17]  P. Duwez,et al.  Non-crystalline Structure in Solidified Gold–Silicon Alloys , 1960, Nature.

[18]  L. Battezzati,et al.  Mechanical properties of Al based amorphous and devitrified alloys containing different rare earth elements , 2004 .

[19]  Yoshihisa Watanabe,et al.  Scanning tunneling microscope observations of metallic glass fracture surfaces , 1993 .

[20]  A. Argon,et al.  The mechanism of fracture in glassy materials capable of some inelastic deformation , 1976 .

[21]  Wei Zhang,et al.  Shear delocalization and crack blunting of a metallic glass containing nanoparticles: In situ deformation in TEM analysis , 2006 .

[22]  J. Hosson,et al.  Scratch test induced shear banding in high power laser remelted metallic glass layers , 2007 .

[23]  K. T. Ramesh,et al.  Bulk and microscale compressive properties of a Pd-based metallic glass , 2007 .

[24]  J. Hosson,et al.  Laser engineered surfaces from glass forming alloy powder precursors: Microstructure and wear , 2009 .

[25]  F. Spaepen.  Metallic glasses: Must shear bands be hot? , 2006 .

[26]  P. Yan,et al.  Tensile ductility and necking of metallic glass. , 2007, Nature materials.

[27]  A. Sergueeva,et al.  Shear band formation and ductility of metallic glasses , 2004 .

[28]  A. Minor,et al.  Plastic flow and failure resistance of metallic glass: Insight from in situ compression of nanopillars , 2008 .

[29]  J. C. Huang,et al.  Bulk and microscale compressive behavior of a Zr-based metallic glass , 2008 .

[30]  A. Argon.  Plastic deformation in metallic glasses , 1979 .

[31]  J. Hosson,et al.  Tribological and mechanical properties of high power laser surface-treated metallic glasses , 2007 .

[32]  Wei Zhang,et al.  Unusual room temperature ductility of glassy copper-zirconium caused by nanoparticle dispersions that grow during shear , 2007 .

[33]  P. Bronsveld,et al.  An electron microscopy appraisal of tensile fracture in metallic glasses , 2008 .

[34]  M. Denda,et al.  Dynamic evolution of nanoscale shear bands in a bulk-metallic glass , 2005 .

[35]  Hays,et al.  Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions , 2000, Physical review letters.

[36]  M. Yan,et al.  The relations between ΔTx and the glass forming ability of bulk amorphous Zr–Cu–Ni–Al–Hf–Ti and Zr52.5Cu17.9Ni14.6Al10Ti5 alloys , 2004 .

[37]  Andrew M Minor,et al.  Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals. , 2008, Nature materials.

[38]  A. L. Greer,et al.  Thickness of shear bands in metallic glasses , 2006 .

[39]  A. Inoue,et al.  Zr–Al–Ni Amorphous Alloys with High Glass Transition Temperature and Significant Supercooled Liquid Region , 1990 .

[40]  Jing Li,et al.  Controlling shear band behavior in metallic glasses through microstructural design , 2002 .

[41]  Global melting of Zr57Ti5Ni8Cu20Al10 bulk metallic glass under microcompression , 2007 .

[42]  Gang Wang,et al.  Super Plastic Bulk Metallic Glasses at Room Temperature , 2007, Science.

[43]  J. Hosson,et al.  Effects of solute Mg on grain boundary and dislocation dynamics during nanoindentation of Al–Mg thin films , 2004 .

[44]  Parmanand Sharma,et al.  Nanoscale patterning of Zr-Al-Cu-Ni metallic glass thin films deposited by magnetron sputtering. , 2005, Journal of nanoscience and nanotechnology.

[45]  J. Eckert,et al.  Mechanical properties of bulk metallic glasses and composites , 2007 .

[46]  Jian Xu,et al.  Critical size and strength of the best bulk metallic glass former in the Mg-Cu-Gd ternary system , 2007 .

[47]  F. Spaepen,et al.  Suppression of the shear band instability during plastic flow of nanometer-scale confined metallic glasses , 2007 .

[48]  Ludwig Schultz,et al.  Novel Ti-base nanostructure–dendrite composite with enhanced plasticity , 2003, Nature materials.

[49]  C. Volkert,et al.  Effect of sample size on deformation in amorphous metals , 2008 .

[50]  V. Vítek,et al.  An atomistic study of deformation of amorphous metals , 1983 .

[51]  M. Telford.  The case for bulk metallic glass , 2004 .

[52]  K. Lu,et al.  Activation energies for crystal nucleation and growth in amorphous alloys , 1991 .

[53]  V. Ocelík,et al.  Possible local superplasticity of amorphous metallic alloys in the catastrophic shear band under low temperature ductile shear failure , 1996 .

[54]  Weihua Wang,et al.  Bulk metallic glasses , 2004 .