Multi-Objective Patch Optimization with Integrated Kinematic Draping Simulation for Continuous–Discontinuous Fiber-Reinforced Composite Structures

Discontinuous fiber-reinforced polymers (DiCoFRP) in combination with local continuous fiber reinforced polymers (CoFRP) provide both a high design freedom and high weight-specific mechanical properties. For the optimization of CoFRP patches on complexly shaped DiCoFRP structures, an optimization strategy is needed which considers manufacturing constraints during the optimization procedure. Therefore, a genetic algorithm is combined with a kinematic draping simulation. To determine the optimal patch position with regard to structural performance and overall material consumption, a multi-objective optimization strategy is used. The resulting Pareto front and a corresponding heat-map of the patch position are useful tools for the design engineer to choose the right amount of reinforcement. The proposed patch optimization procedure is applied to two example structures and the effect of different optimization setups is demonstrated.

[1]  Klaus Wolf,et al.  Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components , 2018 .

[2]  R. Marler,et al.  The weighted sum method for multi-objective optimization: new insights , 2010 .

[3]  Tianguo Jin,et al.  A Geometry Information Based Fishnet Algorithm for Woven Fabric Draping in Liquid Composite Molding , 2014 .

[4]  Michel Grédiac,et al.  Applying a genetic algorithm to the optimization of composite patches , 2006 .

[5]  Frank Henning,et al.  A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites , 2017 .

[6]  A. J. M. Spencer.  Theory of fabric-reinforced viscous fluids , 2000 .

[7]  Analysis of the Diaphragm Forming of Continuous Fiber Reinforced Thermoplastics , 1988 .

[8]  Modelling of composite sheet forming: a review , 2002 .

[9]  Frank Henning,et al.  A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF) , 2017 .

[10]  Michael Keefe,et al.  A Simulation of the Draping of Bidirectional Fabrics over Arbitrary Surfaces , 1990 .

[11]  Thomas Bäck,et al.  Evolutionary algorithms in theory and practice - evolution strategies, evolutionary programming, genetic algorithms , 1996 .

[12]  Paolo Ermanni,et al.  Optimizing the shape and placement of patches of reinforcement fibers , 2007 .

[13]  Michael S. Eldred,et al.  DAKOTA , A Multilevel Parallel Object-Oriented Framework for Design Optimization , Parameter Estimation , Uncertainty Quantification , and Sensitivity Analysis Version 4 . 0 User ’ s Manual , 2006 .

[14]  L. T. Harper,et al.  Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints , 2015 .

[15]  Anthony K. Pickett,et al.  Simplified and advanced simulation methods for prediction of fabric draping , 2005 .

[16]  Mathias Giger.  Representation concepts in evolutionary algorithm-based structural optimization , 2007 .

[18]  M. Zhou,et al.  PROGRESS IN TOPOLOGY OPTIMIZATION WITH MANUFACTURING CONSTRAINTS , 2002 .

[19]  Y. Xie,et al.  Topology optimization of nonlinear structures under displacement loading , 2008 .

[20]  Paolo Ermanni,et al.  A methodology for the global optimization of laminated composite structures , 2006 .

[21]  D. Dumas,et al.  From stacking sequences to ply layouts: An algorithm to design manufacturable composite structures , 2016 .

[22]  Yunqing Zhang,et al.  Manufacturing- and machining-based topology optimization , 2006 .

[23]  G. Allaire,et al.  Stacking sequence and shape optimization of laminated composite plates via a level-set method , 2016 .

[24]  Mpf Sutcliffe,et al.  Multi-objective optimisation of woven composite draping using genetic algorithms , 2006 .

[25]  Jan-Anders E. Månson,et al.  Optimization of hybrid thermoplastic composite structures using surrogate models and genetic algorithms , 2007 .

[26]  A. Long,et al.  A Simulation of Reinforcement Deformation during the Production of Preforms for Liquid Moulding Processes , 1994 .

[27]  C. Qian,et al.  Structural optimisation of random discontinuous fibre composites: Part 1 – Methodology , 2015 .

[28]  Panos Y. Papalambros,et al.  Panos Papalambros a Survey of Structural Optimization in Mechanical Product Development , 2022 .

[29]  Erik Lund,et al.  Topology and thickness optimization of laminated composites including manufacturing constraints , 2013 .

[30]  Fabrice Morestin,et al.  Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming , 2010 .

[31]  Mpf Sutcliffe,et al.  Draping of woven fabrics: Progressive drape model , 2003 .

[32]  Malin Åkermo,et al.  Cost/weight optimization of composite prepreg structures for best draping strategy , 2010 .

[33]  Carlos A. Coello Coello,et al.  A Short Tutorial on Evolutionary Multiobjective Optimization , 2001, EMO.

[34]  Thomas Vietor,et al.  Optimization of Variable Stiffness Composites in Automated Fiber Placement Process using Evolutionary Algorithms , 2017 .

[35]  Alexander Bernath,et al.  Development and validation of a CAE chain for unidirectional fibre reinforced composite components , 2015 .

[36]  Sophia Lefantzi,et al.  DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis. , 2011 .