Analyzing the optimal matching of dc motors to photovoltaic modules via dc-dc converters

Because to the nonlinear behavior of the photovoltaic (PV) cells, dc-dc power converters are added for matching the load to the photovoltaic modules (PVM). In this paper, we use mathematical models in order to examine the behavior of the off-grid photovoltaic system composed by: PV generator, dc-dc converter and dc motor. We compare different converter topologies (step-up, step-down and step-down/step-up) and evaluate the feasibility of being used as interface to attain operation around the maximum power point (MPP). Our analysis found the relationships between the optimal duty ratio and the maximum power, and between the optimal duty ratio and the motor speed; using these relationships, the simplest topology to meet the requirement can be selected as interface. Moreover, a simple but reliable maximum power point tracking (MPPT) method and a controller are implemented on a microcontroller and tested in real weather conditions. The MPPT provides an approximation to the optimal voltage or to the optimal current in a straightforward way, and the controller adjusts the duty ratio of the power converter, improving the matching of the PVM supplying a dc motor, when operation around MPP is obtained.

[1]  M. Akbaba,et al.  Optimization of the performance of solar powered permanent magnet dc motor drives , 2007, 2007 International Aegean Conference on Electrical Machines and Power Electronics.

[2]  Andres Salazar-Llinas,et al.  A maximum power point tracker implementation for photovoltaic cells using dynamic optimal voltage tracking , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[3]  K. Venkatesan,et al.  Matching DC motors to photovoltaic generators for maximum power tracking , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[4]  Eduardo I. Ortiz-Rivera,et al.  Sensorless control of SEPIC and Ćuk converters for DC motors using solar panels , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[5]  M.S.J. Asghar,et al.  Matching of a Separately Excited DC Motor to a Photovoltaic Panel using an Analog Maximum Power Point Tracker , 2006, 2006 IEEE International Conference on Industrial Technology.

[6]  Saad Alghuwainem.  Matching of a DC motor to a photovoltaic generator using a step-up converter with a current-locked loop , 1994 .

[7]  W. Z. Fam,et al.  Dynamic performance of a DC shunt motor connected to a photovoltaic array , 1988 .

[8]  Mohamed Mostafa Saied.  Matching of DC motors to photovoltaic generators for maximum daily gross mechanical energy , 1988 .

[9]  E. Duran,et al.  Comparative analysis of buck-boost converters used to obtain I–V characteristic curves of photovoltaic modules , 2008, 2008 IEEE Power Electronics Specialists Conference.

[10]  Saad Alghuwainem.  Steady-state performance of DC motors supplied from photovoltaic generators with step-up converter , 1992 .

[11]  Liang Yang,et al.  A Novel Maximum Power Trecking Controller for a Stand-alone Photovoltaic DC Motor Drive , 2006, 2006 Canadian Conference on Electrical and Computer Engineering.

[12]  Eduardo I. Ortiz-Rivera,et al.  A maximum power point tracker using positive feedforward control based on the DC motor dynamics and PVM mathematical model , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[13]  E.I. Ortiz-Rivera,et al.  Maximum power point tracking using the optimal duty ratio for DC-DC converters and load matching in photovoltaic applications , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[14]  Weidong Xiao,et al.  Regulation of Photovoltaic Voltage , 2007, IEEE Transactions on Industrial Electronics.

[15]  A.M. Sharaf,et al.  An Error Driven Pid Controller for Maximum Utilization of Photovoltaic Powered PMDC Motor Drives , 2007, 2007 Canadian Conference on Electrical and Computer Engineering.

[16]  A. M. Sharaf,et al.  A photovoltaic powered separately excited DC motor drive for rural/desert pump irrigation , 1993 .

[17]  Gilbert M. Masters,et al.  Renewable and Efficient Electric Power Systems , 2004 .

[18]  Gilbert M. Masters,et al.  Renewable and Efficient Electric Power Systems: Masters/Electric Power Systems , 2004 .

[19]  E.I. Ortiz-Rivera,et al.  A general purpose tool for simulating the behavior of PV solar cells, modules and arrays , 2008, 2008 11th Workshop on Control and Modeling for Power Electronics.

[20]  R. Krishnan,et al.  Electric Motor Drives: Modeling, Analysis, and Control , 2001 .

[21]  P.L. Chapman,et al.  Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques , 2007, IEEE Transactions on Energy Conversion.

[22]  M. M. Saied.  A study on the matching of DC motors to photovoltaic solar arrays , 2001, ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501).

[23]  F.Z. Peng,et al.  Analytical Model for a Photovoltaic Module using the Electrical Characteristics provided by the Manufacturer Data Sheet , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[24]  Tsutomu Hoshino,et al.  Field and armature control for separately excited DC motors powered by photovoltaic cells , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[25]  Kotaro Hirasawa,et al.  The dynamic performance of photovoltaic supplied dc motor fed from DC-DC converter and controlled by neural networks , 2002, Proceedings of the 2002 International Joint Conference on Neural Networks. IJCNN'02 (Cat. No.02CH37290).

[26]  Joseph Appelbaum,et al.  Starting characteristics of direct current motors powered by solar cells , 1993 .

[27]  E.I. rtiz-Rivera,et al.  A novel method to estimate the maximum power for a photovoltaic inverter system , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).