A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent-Magnet Motors
暂无分享,去创建一个
Min-Fu Hsieh | David G. Dorrell | Mircea Popescu | Vic Grout | David A. Staton | Lyndon Evans | D. Staton | M. Hsieh | D. Dorrell | Mircea Popescu | V. Grout | L. Evans
[1] Sandra McLain. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS , 2007 .
[2] Juan A. Tapia,et al. Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors , 2008, IEEE Transactions on Industrial Electronics.
[3] M.S. Islam,et al. Issues in reducing the cogging torque of mass-produced permanent-magnet brushless DC motor , 2004, IEEE Transactions on Industry Applications.
[4] Mircea Popescu,et al. Unbalanced Magnetic Pull Due to Asymmetry and Low-Level Static Rotor Eccentricity in Fractional-Slot Brushless Permanent-Magnet Motors With Surface-Magnet and Consequent-Pole Rotors , 2010, IEEE Transactions on Magnetics.
[5] K. Yoshida,et al. Eddy-current loss analysis in PM of surface-mounted-PM SM for electric vehicles , 2000 .
[6] Z.Q. Zhu,et al. Unbalanced Magnetic Forces in Permanent-Magnet Brushless Machines With Diametrically Asymmetric Phase Windings , 2005, IEEE Transactions on Industry Applications.
[7] Fabrizio Marignetti,et al. Design of Axial Flux PM Synchronous Machines Through 3-D Coupled Electromagnetic Thermal and Fluid-Dynamical Finite-Element Analysis , 2008, IEEE Transactions on Industrial Electronics.
[8] Takashi Kenjo,et al. Permanent-Magnet and Brushless DC Motors , 1985 .
[9] R. H. Staunton,et al. Evaluation of the 2007 Toyota Camry Hybrid Synergy Drive System , 2008 .
[10] David G. Dorrell. Combined Thermal and Electromagnetic Analysis of Permanent-Magnet and Induction Machines to Aid Calculation , 2008, IEEE Transactions on Industrial Electronics.
[11] T. Miller,et al. Prediction of cogging torque using the flux-MMF diagram technique , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.
[12] T.J.E. Miller,et al. Assessment of torque components in brushless permanent magnet machines through numerical analysis of the electromagnetic field , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..
[13] David G. Dorrell. Tolerance variations and magnetization modelling in brushless permanent magnet machines , 2002 .
[14] B. J. Chalmers,et al. Modelling and simulation of the Torus generator , 1997 .
[15] Baekhyun Cho,et al. Transmissionless Selectively Aligned Surface-Permanent-Magnet BLDC Motor in Hybrid Electric Vehicles , 2010, IEEE Transactions on Industrial Electronics.
[16] L. Timár-P.,et al. Noise and vibration of electrical machines , 1989 .
[17] Janne Nerg,et al. Thermal Analysis of Radial-Flux Electrical Machines With a High Power Density , 2008, IEEE Transactions on Industrial Electronics.
[18] Dahaman Ishak,et al. Permanent magnet brushless machines with minimum difference in slot number and pole number , 2008, 2008 IEEE 2nd International Power and Energy Conference.
[19] Katsumi Yamazaki,et al. Rotor-Shape Optimization of Interior-Permanent-Magnet Motors to Reduce Harmonic Iron Losses , 2010, IEEE Transactions on Industrial Electronics.
[20] Jere Kolehmainen. Optimal Dovetail Permanent Magnet Rotor Solutions for Various Pole Numbers , 2010, IEEE Transactions on Industrial Electronics.
[21] K. Yamazaki. Torque and efficiency calculation of an interior permanent magnet motor considering harmonic iron losses of both the stator and rotor , 2003 .
[22] A. Boglietti,et al. TEFC induction motors thermal models: a parameter sensitivity analysis , 2004, IEEE Transactions on Industry Applications.
[23] M. Popescu,et al. Torque Calculation in Finite Element Solutions of Electrical Machines by Consideration of Stored Energy , 2006, IEEE Transactions on Magnetics.
[24] Philip Beckley,et al. Electrical Steels for Rotating Machines , 2002 .
[25] R. V. Major. Development of high strength soft magnetic alloys for high speed electrical machines , 1998 .
[26] R. Wrobel,et al. Investigation of Proximity Losses in a High Speed Brushless Permanent Magnet Motor , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.
[27] T.A. Lipo,et al. Torque quality assessment and sizing optimization for surface mounted permanent magnet machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).
[28] R. Wrobel,et al. Influence of Stator Structure on Electromechanical Parameters of Torus-Type Brushless DC Motor , 2002, IEEE Power Engineering Review.
[29] P. Campbell. Permanent Magnet Materials and their Application , 1994 .
[30] Duane C. Hanselman,et al. Brushless Permanent-Magnet Motor Design , 1994 .
[31] Leila Parsa,et al. Interior Permanent Magnet Motors With Reduced Torque Pulsation , 2008, IEEE Transactions on Industrial Electronics.
[32] D.M. Saban,et al. Design of High-Speed Direct-Connected Permanent-Magnet Motors and Generators for the Petrochemical Industry , 2007, IEEE Transactions on Industry Applications.
[33] E. Muljadi,et al. Axial flux, modular, permanent-magnet generator with a toroidal winding for wind turbine applications , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).
[34] Roberto Perini,et al. Permanent Magnet Machines for Modulated Damping of Seismic Vibrations: Electrical and Thermal Modeling , 2008, IEEE Transactions on Industrial Electronics.
[35] C. Cossar,et al. Flux-linkage calculation in permanent-magnet motors using the frozen permeabilities method , 2005, IEEE Transactions on Magnetics.
[36] Jin Hur,et al. Characteristic Analysis of Interior Permanent-Magnet Synchronous Motor in Electrohydraulic Power Steering Systems , 2008, IEEE Transactions on Industrial Electronics.
[37] H. Saunders,et al. Machinery Noise Measurements , 1988 .
[38] Z. Q. Zhu,et al. Influence of slot and pole number combination on radial force and vibration modes in fractional slot PM brushless machines having single- and double-layer windings , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[39] Antonios G. Kladas,et al. Internal Permanent Magnet Motor Design for Electric Vehicle Drive , 2010, IEEE Transactions on Industrial Electronics.
[40] A.C. Smith,et al. Line-Start Permanent-Magnet Machines Using a Canned Rotor , 2009, IEEE Transactions on Industry Applications.
[41] K. H. J. Buschow,et al. Permanent-Magnet Materials and Their Applications , 1999 .
[42] A. Boglietti,et al. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors , 2005, IEEE Transactions on Energy Conversion.
[43] Klaus Brun,et al. Beyond IEEE Std 115 & API 546: Test procedures for high-speed, multi-megawatt permanent-magnet synchronous machines , 2009, 2009 Record of Conference Papers - Industry Applications Society 56th Annual Petroleum and Chemical Industry Conference.
[44] Thomas A. Lipo,et al. Introduction to AC machine design , 2017 .
[45] G. Stone,et al. Electrical Insulation for Rotating Machines , 2003 .
[46] Ayman M. El-Refaie,et al. Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.
[47] Valéria Hrabovcová,et al. Design of Rotating Electrical Machines , 2009 .
[48] Thomas A. Lipo,et al. Electromagnetic vibration and noise assessment for surface mounted PM machines , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).
[49] T.A. Keim,et al. Mechanical design considerations for conventionally laminated, high-speed, interior PM synchronous machine rotors , 2004, IEEE Transactions on Industry Applications.
[50] R. D. De Doncker,et al. Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).
[51] J.F. Gieras,et al. Analytical approach to cogging torque calculation of PM brushless motors , 2004, IEEE Transactions on Industry Applications.
[52] Jacek F. Gieras,et al. Axial Flux Permanent Magnet Brushless Machines , 2005 .
[53] Mauro Andriollo,et al. Design Improvement of a Single-Phase Brushless Permanent Magnet Motor for Small Fan Appliances , 2010, IEEE Transactions on Industrial Electronics.
[54] F. Magnussen,et al. Parasitic Effects in PM Machines With Concentrated Windings , 2005, IEEE Transactions on Industry Applications.
[55] Nicola Bianchi,et al. Design techniques for reducing the cogging torque in surface-mounted PM motors , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).
[56] T.A. Lipo,et al. Permanent Magnet Machine Design Practice and Optimization , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.
[57] D. R. Turner,et al. Lumped parameter thermal model for electrical machines of TEFC design , 1991 .
[58] T.J.E. Miller,et al. Torque prediction using the flux-MMF diagram in AC, DC, and reluctance motors , 1996 .
[59] D. Staton,et al. Servo Motor Size Reduction-Need for Thermal CAD , 2002 .
[60] R. Krishnan,et al. Permanent Magnet Synchronous and Brushless DC Motor Drives , 2009 .
[61] Yves Perriard,et al. Very-High-Speed Slotless Permanent-Magnet Motors: Analytical Modeling, Optimization, Design, and Torque Measurement Methods , 2010, IEEE Transactions on Industrial Electronics.