Die geometry induced heterogeneous morphology of polypropylene inside the die during die-drawing process

[1]  William H. Heath,et al.  Segmented Thermoplastic Polymers Synthesized by Thiol–Ene Click Chemistry: Examples of Thiol–Norbornene and Thiol–Maleimide Click Reactions , 2018 .

[2]  Ran Chen,et al.  Stretching Temperature Dependency of Fibrillation Process in Isotactic Polypropylene. , 2017, The journal of physical chemistry. B.

[3]  Liangbin Li,et al.  Structural origin of fast yielding-strain hardening transition in fluoroelastomer F2314 , 2017 .

[4]  Y. Sun,et al.  Influence of propylene-based elastomer on stress-whitening for impact copolymer , 2017 .

[5]  P. Coates,et al.  Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing , 2017 .

[6]  Chul B. Park,et al.  Fiber-spun polypropylene/polyethylene terephthalate microfibrillar composites with enhanced tensile and rheological properties and foaming ability , 2017 .

[7]  N. Sombatsompop,et al.  Materials modification and die design for minimizing internal melt distortions of glass fiber/PP co-extrudates , 2017 .

[8]  Lu Ying,et al.  衝撃共重合体の応力白化に及ぼすプロピレン系エラストマーの影響【Powered by NICT】 , 2017 .

[9]  De-wen Zhao,et al.  Upper bound analysis of wire drawing through a twin parabolic die , 2016 .

[10]  Y. Men,et al.  Stretching Temperature Dependency of Lamellar Thickness in Stress-Induced Localized Melting and Recrystallized Polybutene-1 , 2013 .

[11]  B. Whiteside,et al.  Tensile Deformation of Oriented Poly(ε-caprolactone) and Its Miscible Blends with Poly(vinyl methyl ether) , 2013 .

[12]  I. Ward,et al.  Process structuring of polymers by solid phase orientation processing , 2013, Science China Chemistry.

[13]  I. Ward,et al.  Hydro and thermal stability of die drawn wood polymer composites in comparison to solid wood , 2012 .

[14]  I. Ward,et al.  Failure mechanisms in polyolefines: The role of crazing, shear yielding and the entanglement network , 2011 .

[15]  I. Ward,et al.  Analysis and design of profiled dies for polymer wire die drawing process , 2008 .

[16]  D. Raabe,et al.  Evolution of crystallinity and of crystallographic orientation in isotactic polypropylene during rolling and heat treatment , 2006 .

[17]  M. Paoli,et al.  Low cost capillary rheometer‚ transfer molding and die-drawing module , 2006 .

[18]  F. Sluga,et al.  High modulus polypropylene fibers. I. Mechanical properties , 2005 .

[19]  J. Rieger,et al.  Role of the entangled amorphous network in tensile deformation of semicrystalline polymers. , 2003, Physical review letters.

[20]  A. Lehtinen,et al.  A morphological study of a highly structurally regular isotactic poly(propylene) fraction , 1999 .

[21]  I. Ward,et al.  Orientation in polypropylene sheets produced by die‐drawing and rolling , 1997 .

[22]  Ta‐Jo Liu,et al.  A simple model for heat transfer inside an extrusion die , 1995 .

[23]  T. Salamon,et al.  The role of surface tension in the dominant balance in the die swell singularity , 1995 .

[24]  M. Mackley,et al.  The experimental observation and numerical prediction of planar entry flow and die swell for molten polyethylenes , 1995 .

[25]  Ta-Jo Liu,et al.  Three‐dimensional finite element analysis of polymeric fluid flow in an extrusion die. Part I: Entrance effect , 1994 .

[26]  I. Ward,et al.  Analytical and experimental study of the die drawing of circular rods through conical dies , 1993 .

[27]  I. Ward,et al.  Production and properties of highly oriented polyoxymethylene by die‐drawing , 1987 .

[28]  D. Leach,et al.  Mechanical properties of poly(ether-ether-ketone) for engineering applications , 1985 .

[29]  I. Ward,et al.  The production and properties of poly(aryletherketone) (PEEK) rods oriented by drawing through a conical die , 1985 .

[30]  I. Ward,et al.  Polymer communications: X-ray diffraction study of die drawn poly (aryletherketone) (PEEK) , 1983 .

[31]  I. Ward,et al.  Manufacture of ultrahigh-modulus poly(oxymethylenes) by die drawing , 1981 .

[32]  I. Ward,et al.  Die drawing: Solid phase drawing of polymers through a converging die , 1981 .

[33]  M. Watts,et al.  Push–pull extrusion: A new approach for the solid‐state deformation illustrated with high density polyethylene , 1981 .

[34]  A. G. Gibson,et al.  High stiffness polymers by die‐drawing , 1980 .

[35]  R. Porter,et al.  Recent developments in ultraorientation of polyethylene by solid-state extrusion , 1980 .

[36]  A. G. Gibson,et al.  The manufacture of ultra-high modulus polyethylenes by drawing through a conical die , 1980 .

[37]  I. Ward,et al.  Drawing of polymers through a conical die , 1979 .

[38]  K. Imada,et al.  Formation of kink bands by compression of the extrudate of solid linear polyethylene , 1975 .

[39]  H. Newman,et al.  The skin‐core morphology and structure–property relationships in injection‐molded polypropylene , 1972 .

[40]  P. Hermans,et al.  Beiträge zur Kenntnis des Deformationsmechanismus und der Feinstruktur der Hydratzellulose , 1939 .

[41]  P. Hermans,et al.  Beiträge zur Kenntnis des Deformationsmechanismus und der Feinstruktur der Hydratzellulose. II , 1937 .