Optimal Design Methodology of Tapered Waveguide Transducers for Thickness Monitoring

For the purpose of providing transducers for long-term monitoring of wall thinning of critical pressure equipment in corrosion or high temperature environments, the optimal design methodology for tapered waveguide units was proposed in the present study. Firstly, the feasibility of the quasi-fundamental shear horizontal (SH0*) wave propagating in the tapered waveguide units was analyzed via numerical simulations, and the transmitting limitations of the non-dispersive SH0* wave were researched. Secondly, several tapered waveguide transducers with varying cross-sections to transmit pure SH0* wave were designed according to the numerical results. Experimental investigations were carried out, and the results were compared with waveguide transducers with a prismatic cross-section. It was found that the tapered waveguide units can transmit non-dispersive shear horizontal waves and suppress the wave attenuation at the same time. The experimental results agreed very well with the numerical simulations. Finally, high-temperature experiments were carried out, and the reliability of thickness measuring by the tapered waveguide transducers was validated. The errors between the measured and the true thicknesses were small. This work paves a solid foundation for the optimal design of tapered waveguide transducers for thickness monitoring of equipment in harsh environments.

[1]  Se-beom Oh,et al.  On-Line Monitoring of Pipe Wall Thinning by a High Temperature Ultrasonic Waveguide System at the Flow Accelerated Corrosion Proof Facility , 2019, Sensors.

[2]  John J. Ditri,et al.  Some results on the scattering of guided elastic SH waves from material and geometric waveguide discontinuities , 1996 .

[3]  F. Cegla,et al.  Acoustic waveguides: An attractive alternative for accurate and robust contact thermometry , 2018 .

[4]  Ning Wang,et al.  Development of On-Line Monitoring Systems for High Temperature Components in Power Plants , 2013, Sensors.

[5]  Yoon Young Kim,et al.  Waveguide tapering for beam-width control in a waveguide transducer. , 2014, Ultrasonics.

[6]  C. Jen,et al.  Experimental evaluation of clad metallic buffer rods for high temperature ultrasonic measurements , 2000 .

[7]  Nurmalia,et al.  Mode conversion behavior of SH guided wave in a tapered plate , 2012 .

[8]  Tribikram Kundu,et al.  Pipe Wall Damage Detection in Buried Pipes Using Guided Waves , 2009 .

[9]  Shan-Tung Tu,et al.  Design of Waveguide Bars for Transmitting a Pure Shear Horizontal Wave to Monitor High Temperature Components , 2017, Materials.

[10]  C. Potel,et al.  Shear acoustic waves polarized along the ridged surface of an isotropic solid plate: Mode coupling effects due to the shape profile , 2010 .

[11]  Jae-Han Lee,et al.  Development of ultrasonic waveguide sensor for under-sodium inspection in a sodium-cooled fast reactor , 2011 .

[12]  Wenfeng Hao,et al.  Detection and monitoring of delamination in composite laminates using ultrasonic guided wave , 2019, Composite Structures.

[13]  Mark J. Schulz,et al.  Piezoelectric Materials at Elevated Temperature , 2003 .

[14]  Shan-Tung Tu,et al.  Critical Excitation of the Fundamental Quasi-Shear Mode Wave in Waveguide Bars for Elevated Temperature Applications , 2019, Sensors.

[15]  Anthony N. Sinclair,et al.  High Temperature Ultrasonic Transducer for Real-time Inspection☆ , 2015 .

[16]  Peter Cawley,et al.  Structural health monitoring: Closing the gap between research and industrial deployment , 2018 .

[17]  L. Lynnworth,et al.  Extensional bundle waveguide techniques for measuring flow of hot fluids , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  Y. Ono,et al.  Aluminum buffer rods for ultrasonic monitoring at elevated temperatures , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[19]  P Cawley,et al.  High-temperature (>500°c) wall thickness monitoring using dry-coupled ultrasonic waveguide transducers , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Dong-Jin Kim,et al.  High-temperature ultrasonic thickness monitoring for pipe thinning in a flow-accelerated corrosion proof test facility , 2017 .