A low-bandgap alternating copolymer containing the dimethylbenzimidazole moiety

A new acceptor unit containing dimethyl-2H-benzimidazole was synthesized and utilized for the synthesis of a conjugated polymer containing electron donor–acceptor pairs for OPV devices. The dimethyl-2H-benzimidazole unit was designed to act as a substitute for the BT unit of PCDTBT. This novel dimethyl-2H-benzimidazole unit has two methyl groups which can supply higher solubility than those of the BT series. A thin film of PCDTMBI, containing the dimethyl-2H-benzimidazole unit, shows two broad absorption bands with maxima at 400 and 636 nm and an absorption onset of 756 nm, corresponding to a band gap of 1.64 eV. The oxidation onset of PCDTMBI was estimated to be 0.67 V, which corresponds to a HOMO energy level of −5.47 eV. The LUMO energy level of the polymer was thus determined to be −3.82 eV. A device with a PCDTMBI:PC71BM blend had a VOC value of 0.65 V, a JSC value of 10.0 mA cm−2, and a FF of 0.48, leading to an efficiency of 3.12%. The enhanced efficiency of PCDTMBI was caused by the higher IPCE value between 400 and 700 nm and high mobility (2.2 × 10−3 cm2 V−1 s−1).

[1]  Christoph J. Brabec,et al.  Panchromatic Conjugated Polymers Containing Alternating Donor/Acceptor Units for Photovoltaic Applications , 2007 .

[2]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[3]  Shinuk Cho,et al.  Effect of substituted side chain on donor-acceptor conjugated copolymers , 2008 .

[4]  S. Jenekhe,et al.  New Didecyloxyphenylene−Acceptor Alternating Conjugated Copolymers: Synthesis, Properties, and Optoelectronic Device Applications , 2008 .

[5]  Shanpeng Wen,et al.  Energy Level and Molecular Structure Engineering of Conjugated Donor−Acceptor Copolymers for Photovoltaic Applications , 2009 .

[6]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[7]  C. Ting,et al.  Low-bandgap poly(thiophene-phenylene-thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells. , 2008, Journal of the American Chemical Society.

[8]  Kwanghee Lee,et al.  Novel Green-Light-Emitting Polymers Based on Cyclopenta[def]phenanthrene , 2008 .

[9]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[10]  A. J. Lovinger,et al.  Luminescence Enhancement by the Introduction of Disorder into Poly(p-phenylene vinylene) , 1995, Science.

[11]  Mario Leclerc,et al.  A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells , 2007 .

[12]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[13]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[14]  Laurence Lutsen,et al.  Low-band gap polymers for photovoltaic applications , 2004 .

[15]  Jan Genoe,et al.  Polymer based organic solar cells using ink-jet printed active layers , 2008 .

[16]  Y. Yamashita,et al.  New Narrow-Bandgap Polymer Composed of Benzobis(1,2,5-thiadiazole) and Thiophenes , 1995 .

[17]  Jan Fyenbo,et al.  Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative , 2010 .

[18]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[19]  C. Hawker,et al.  Self-encapsulation of poly-2,7-fluorenes in a dendrimer matrix. , 2001, Journal of the American Chemical Society.

[20]  Ismayil Nurulla,et al.  Preparation and properties of poly[(2-alkylbenzimidazole)-alt-thiophene]s with long alkyl side chains , 2001 .