Design and Control of 6-DOF Mechanism for Twin-Frame Mobile Robot

A new lightweight six-legged robot that uses a simple mechanism and can move and work with high efficiency has been developed. This robot consists of two leg-bases with three legs each, and walks by moving each leg-base alternately. These leg-bases are connected to each other with a 6 degrees of freedom (DOF) mechanism. While designing this robot, the output force, velocity, and workspace of various connection mechanisms were compared, and the results showed that good performance could be achieved with a serial/parallel hybrid mechanism. The serial/parallel hybrid mechanism consists of three 6-DOF serially linked arms positioned with radial symmetry about the center of each leg-base; each leg-base is composed of two active and four passive joints. Walking experiments with this robot confirmed that this mechanism has satisfactory performance not only as a walking robot, but also as an active walking platform. Furthermore, in this robot, the entire leg-drive mechanism acts as a 6-axis force sensor, and individual sensors at the feet are not necessary. The forces and moments can be calculated from the changes in the joint angles. Experiments conducted verified that smooth contact with the ground by the swing-leg and successful switching from swing to support leg can be achieved using this force control and force measurement method.

[1]  Fumihito Arai,et al.  An omni-directional six-legged walking robot , 1994, Adv. Robotics.

[2]  D. Stewart,et al.  A Platform with Six Degrees of Freedom , 1965 .

[3]  Charles A. Klein,et al.  Optimal force distribution for the legs of a walking machine with friction cone constraints , 1990, IEEE Trans. Robotics Autom..

[4]  Masaru Uchiyama,et al.  A New Design of a 6-DOF Parallel Robot , 1990, J. Robotics Mechatronics.

[5]  Dimitry M. Gorinevsky,et al.  Force Control in Locomotion of Legged Vehicles over Rigid and Soft Surfaces , 1990, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[6]  Shigeo Hirose,et al.  Six-axis force control for walking robot with serial/parallel hybrid mechanism , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[7]  Shigeo Hirose,et al.  Research on a six-legged walking robot with parallel mechanism , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[8]  Dinesh K. Pai,et al.  Platonic beasts: a new family of multilimbed robots , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[9]  Makoto Kaneko,et al.  Basic Considerations on Degrees of Freedom of Multi-Legged Locomotion Machines , 1984 .

[10]  Shigeo Hirose,et al.  Dynamic and static fusion gait of a quadruped walking vehicle on a winding path , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[11]  Murali Krishna,et al.  Tethering system design for Dante II , 1997, Proceedings of International Conference on Robotics and Automation.

[12]  Kan Yoneda,et al.  Sky-Hook Suspension Control of a Quadruped Walking Vehicle , 1994 .

[13]  Arthur C. Sanderson,et al.  TETROBOT modular robotics: prototype and experiments , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[14]  Kenneth J. Waldron,et al.  Force and motion management in legged locomotion , 1986, 1985 24th IEEE Conference on Decision and Control.

[15]  Eiji Nakano,et al.  Terrain following control of self-contained semi-fixed gait hexapod walking robot , 1990, EEE International Workshop on Intelligent Robots and Systems, Towards a New Frontier of Applications.