Design of optimum component test plans in the demonstration of diverse system performance measures

While component-level tests have many advantages over system-level tests, the actual protection offered in making inferences about system reliability is not the same as what is expected. Thus, a significant proportion of research has concentrated on the design of system-based component test plans that also have minimum cost. This article extends those previous studies by considering two additional system performance measures: expected system lifetime and system availability. After explicitly expressing these performance measures as a function of failure rates for various system types, the component testing problem is formulated as a semi-infinite linear programming problem and solved with a column generation technique incorporating signomial geometric programming. Several numerical examples are presented that provide insight on the model parameters.

[1]  Süleyman Özekici,et al.  Reliability of Complex Devices in Random Environments. , 1987 .

[2]  Gregory Levitin.  Element Availability Importance in Generalized k-out-of-r-from-n Systems , 2003 .

[3]  R. Natarajan.  A Reliability Problem with Spares and Multiple Repair Facilities , 1968, Oper. Res..

[4]  Y. Ijiri.  Fundamental Queries in Aggregation Theory , 1971 .

[5]  M. A. López-Cerdá,et al.  Linear Semi-Infinite Optimization , 1998 .

[6]  M. Mazumdar.  An Optimum Procedure for Component Testing in the Demonstration of Series System Reliability , 1977, IEEE Transactions on Reliability.

[7]  Jyotirmoy Sarkar,et al.  Limiting average availability of a system supported by several spares and several repair facilities , 2006 .

[8]  V. Sridharan,et al.  Stochastic behaviour of a two-unit standby system with two types of repairmen and patience time , 1998 .

[9]  Vicki M. Bier,et al.  On the concept of perfect aggregation in Bayesian estimation , 1994 .

[10]  Richard E. Barlow,et al.  Theory of maintained systems: Distribution of time to first system failure , 1976, Advances in Applied Probability.

[11]  Stephen P. Boyd,et al.  A tutorial on geometric programming , 2007, Optimization and Engineering.

[12]  I K Altınel.  The design of optimum component test plans in the demonstration of system reliability , 1994 .

[13]  I. Kuban Altinel,et al.  Component testing of a series system in a random mission , 2002, Reliab. Eng. Syst. Saf..

[14]  Xiaohu Li,et al.  Reliability analysis of a repairable k-out-of-n system with some components being suspended when the system is down , 2006, Reliab. Eng. Syst. Saf..

[15]  I. Kuban Altinel,et al.  Optimum component test plans for systems with dependent components , 1998, Eur. J. Oper. Res..

[16]  K. O. Kim,et al.  Optimal allocation of s-identical, multi-functional spares in a series system , 1999 .

[17]  M. Naceur Azaiez,et al.  Aggregation error in Bayesian analysis of reliability systems , 1996 .

[18]  Guangbin Yang.  Reliability Demonstration Through Degradation Bogey Testing , 2009, IEEE Transactions on Reliability.

[19]  Matthieu van der Heijden,et al.  On the availability of a k-out-of-N system given limited spares and repair capacity under a condition based maintenance strategy , 2004, Reliab. Eng. Syst. Saf..

[20]  Mainak Mazumdar,et al.  A Comparison of Several Component-Testing Plans for a Series System , 1986, IEEE Transactions on Reliability.

[21]  Wen Lea Pearn,et al.  Cost benefit analysis of series systems with warm standby components and general repair time , 2005, Math. Methods Oper. Res..

[22]  I. K. Altinel,et al.  The design of optimum component test plans in the demonstration of a series system reliability , 1992 .

[23]  I. K. Altinel,et al.  The design of optimum component test plans for system reliability , 2006, Comput. Stat. Data Anal..

[24]  V. Bier,et al.  Perfect aggregation for a class of general reliability models with Bayesian updating , 1995 .

[25]  İ K Altınel,et al.  Component testing of repairable systems in multistage missions , 2001, J. Oper. Res. Soc..

[26]  David G. Robinson,et al.  An algorithmic approach to increased reliability through standby redundancy , 1989 .

[27]  Shmuel Gal,et al.  Optimal Test Design for Reliability Demonstration , 1974, Oper. Res..

[28]  Kuo-Hsiung Wang,et al.  Comparison of reliability and the availability between four systems with warm standby components and standby switching failures , 2006, Appl. Math. Comput..

[29]  Jayant Rajgopal,et al.  A type-II censored, log test time based, component-testing procedure for a parallel system , 1988 .

[30]  J. H. Seo,et al.  Design of accelerated life test sampling plans with a nonconstant shape parameter , 2009, Eur. J. Oper. Res..

[31]  Arturo J. Fernández.  Tolerance Limits for $k$-Out-of- $n$ Systems With Exponentially Distributed Component Lifetimes , 2010, IEEE Transactions on Reliability.

[32]  Jayant Rajgopal,et al.  A system-based component test plan for a series system, with type-II censoring , 1996, IEEE Trans. Reliab..

[33]  Mark Brown.  On the Reliability of Repairable Systems , 1984, Oper. Res..

[34]  I. K. Altinel,et al.  Optimum component test plans for phased-mission systems , 2008, Eur. J. Oper. Res..

[35]  Miroslav Koucký.  Exact reliability formula and bounds for general k-out-of-n systems , 2003, Reliab. Eng. Syst. Saf..

[36]  L. Baxter.  Availability measures for coherent systems of separately maintained components , 1983 .

[37]  M. Mazumdar.  An Optimum Component Testing Procedure for a Series System With Redundant Subsystems , 1980 .

[38]  Peiping Shen,et al.  Accelerating method of global optimization for signomial geometric programming , 2008 .

[39]  V. E. Johnson,et al.  A hierarchical model for estimating the early reliability of complex systems , 2005, IEEE Transactions on Reliability.

[40]  Samuel Kotz,et al.  On the Effect of Redundancy for Systems with Dependent Components , 2003 .

[41]  Wendai Wang,et al.  Reliability/availability of K-out-of-N system with M cold standby units , 2002, Annual Reliability and Maintainability Symposium. 2002 Proceedings (Cat. No.02CH37318).

[42]  Herbert A. Simon,et al.  Aggregation of Variables in Dynamic Systems , 1961 .

[43]  Esther Frostig,et al.  On the availability of R out of N repairable systems , 2002 .

[44]  George Kokolakis,et al.  A two-unit parallel system supported by (n − 2) standbys with general and non-identical lifetimes , 2004, Int. J. Syst. Sci..

[45]  John E. Angus.  On computing MTBF for a k-out-of-n:G repairable system , 1988 .

[46]  Floyd W. Spencer,et al.  System-based component-test plans and operating characteristics: binomial data , 1991 .

[47]  I. Kuban Altinel,et al.  A dynamic model for component testing , 1997 .