The effects of functionalized graphene nanosheets on the thermal and mechanical properties of epoxy composites for anisotropic conductive adhesives (ACAs)

[1]  P.H.F. Morshuis,et al.  Modelling of the thermal conductivity in polymer nanocomposites and the impact of the interface between filler and matrix , 2011 .

[2]  Jongmin Kim,et al.  Dispersion, hybrid interconnection and heat dissipation properties of functionalized carbon nanotubes in epoxy composites for electrically conductive adhesives (ECAs) , 2011, Microelectron. Reliab..

[3]  Yong-Sung Eom,et al.  Electrical Interconnection with a Smart ACA Composed of Fluxing Polymer and Solder Powder , 2010 .

[4]  R. Ruoff,et al.  Hydrogen bond networks in graphene oxide composite paper: structure and mechanical properties. , 2010, ACS nano.

[5]  H. Tien,et al.  Effect of functionalized carbon nanotubes on the thermal conductivity of epoxy composites , 2010 .

[6]  Jongmin Kim,et al.  Effects of novel carboxylic acid-based reductants on the wetting characteristics of anisotropic conductive adhesive with low melting point alloy filler , 2010, Microelectron. Reliab..

[7]  R. Piner,et al.  Exfoliation of graphite oxide in propylene carbonate and thermal reduction of the resulting graphene oxide platelets. , 2010, ACS nano.

[8]  Jung-Geun Han,et al.  Hybrid Interconnection Process Using Solderable ICAs (Isotropic Conductive Adhesives) with Low-Melting-Point Alloy Fillers , 2009 .

[9]  Jang-Kyo Kim,et al.  Preparation of graphite nanoplatelets and graphene sheets. , 2009, Journal of colloid and interface science.

[10]  S. Stankovich,et al.  Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy , 2009 .

[11]  D.D.L. Chung,et al.  Graphite nanoplatelet pastes vs. carbon black pastes as thermal interface materials , 2009 .

[12]  Jing Li,et al.  Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites , 2008 .

[13]  Xu Du,et al.  Approaching ballistic transport in suspended graphene. , 2008, Nature nanotechnology.

[14]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[15]  J. Zhong,et al.  A review of the influencing factors on anisotropic conductive adhesives joining technology in electrical applications , 2008 .

[16]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[17]  S. Stankovich,et al.  Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide , 2007 .

[18]  M. Itkis,et al.  Graphite Nanoplatelet−Epoxy Composite Thermal Interface Materials , 2007 .

[19]  Jang‐Kyo Kim,et al.  Functionalization of carbon nanotubes using a silane coupling agent , 2006 .

[20]  Kyung-Wook Paik,et al.  Recent advances on anisotropic conductive adhesives (ACAs) for flat panel displays and semiconductor packaging applications , 2006 .

[21]  V.V.N. Obreja.  On the Reliability of Power Silicon Rectifier Diodes above the Maximum Permissible Operation Junction Temperature , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[22]  Soo-Jin Park,et al.  Preparation and physical properties of hollow glass microspheres-reinforced epoxy matrix resins , 2005 .

[23]  Soo-Jin Park,et al.  Synthesis and Thermal Properties of Epoxidized Vegetable Oil , 2004 .

[24]  Bo You,et al.  Preparation and characterization of poly(styrene butylacrylate) latex/nano‐ZnO nanocomposites , 2003 .

[25]  László Forró,et al.  Al(OH)3/Multiwalled Carbon Nanotube Composite: Homogeneous Coverage of Al(OH)3 on Carbon Nanotube Surfaces , 2003 .

[26]  Jiang Zhu,et al.  Improving the Dispersion and Integration of Single-Walled Carbon Nanotubes in Epoxy Composites through Functionalization , 2003 .

[27]  D.D.L. Chung,et al.  Lithium Doped Polyethylene-Glycol-Based Thermal Interface Pastes for High Thermal Contact Conductance , 2002 .

[28]  P. Kapur,et al.  Technology and reliability constrained future copper interconnects. I. Resistance modeling , 2002 .

[29]  Richard W. Siegel,et al.  Glass transition behavior of alumina/polymethylmethacrylate nanocomposites , 2002 .

[30]  M. Radosavljevic,et al.  Carbon nanotube composites for thermal management , 2002, cond-mat/0205418.

[31]  Emmanuel Flahaut,et al.  CARBON NANOTUBE-METAL-OXIDE NANOCOMPOSITES: MICROSTRUCTURE, ELECTRICAL CONDUCTIVITY AND MECHANICAL PROPERTIES , 2000 .

[32]  Yi He,et al.  Thermal characterization of an epoxy-based underfill material for flip chip packaging , 2000 .

[33]  R. Viswanath.  Thermal Performance Challenges from Silicon to Systems , 2000 .

[34]  P. Sherwood,et al.  Valence band x-ray photoelectron spectroscopic studies to distinguish between oxidized aluminum species , 1999 .

[35]  J. C. Jagt,et al.  Electrically conductive adhesives: a prospective alternative for SMD soldering? , 1995 .

[36]  D. Costa,et al.  Resistance to Pitting and Chemical Composition of Passive Films of a Fe‐17%Cr Alloy in Chloride‐Containing Acid Solution , 1994 .

[37]  J. M. Martín,et al.  Chemistry of the interface between aluminium and polyethyleneterephthalate by XPS , 1991 .

[38]  W. S. Hummers,et al.  Preparation of Graphitic Oxide , 1958 .