Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing

Abstract High throughput automated techniques are nowadays playing a key role in polymer composite manufacturing in a number of industries such as automotive and aerospace. There is a need to produce high volume parts efficiently. Automated manufacturing methods such as automated tape layup and automated fiber placement can produce composite parts efficiently, and with the advent of additive manufacturing the complexity of these components are increasing. This paper will review contemporary composite manufacturing methods filament winding, automated tape layup, and automated fiber placement, and the newer automation techniques of robotic pick-and-place and continuous tow shearing. It also addresses recent advances in composite additive manufacturing using vat photopolymerization, binder jetting, material extrusion, sheet lamination and powder bed fusion. Methods, materials and testing results of the manufactured components will be discussed.

[1]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[2]  Luca Sorrentino,et al.  Influence of winding speed and winding trajectory on tension in robotized filament winding of full section parts , 2005 .

[3]  R. Inführ,et al.  Photopolymers for rapid prototyping , 2007 .

[4]  E. Siochi,et al.  Additive Manufacturing of Multifunctional Components Using High Density Carbon Nanotube Yarn Filaments , 2016 .

[5]  D. Karalekas,et al.  Composite rapid prototyping: overcoming the drawback of poor mechanical properties , 2004 .

[6]  Eleonora Atzeni,et al.  Economics of additive manufacturing for end-usable metal parts , 2012 .

[7]  Xiaohong Qin,et al.  Additive manufacturing of multi-directional preforms for composites: opportunities and challenges , 2015 .

[8]  M. Cima,et al.  Strength of Green Ceramics with Low Binder Content , 2001 .

[9]  Krishnendu Roy,et al.  A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. , 2006, Journal of biomedical materials research. Part A.

[10]  Liang Hao,et al.  Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering , 2011 .

[11]  George Marsh,et al.  Automating aerospace composites production with fibre placement , 2011 .

[12]  Richard P. Chartoff,et al.  Interfacial characteristics of composites fabricated by laminated object manufacturing , 1998 .

[13]  Thomas A. Campbell,et al.  Inkjet Printing of Quantum Dots in Photopolymer for Use in Additive Manufacturing of Nanocomposites , 2013 .

[14]  Ryan B. Wicker,et al.  Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing , 2015 .

[15]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[16]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[17]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[18]  Srinivas Kodiyalam,et al.  Optimization of tow fiber paths for composite design , 1995 .

[19]  Ali P. Gordon,et al.  Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives , 2015, JOM.

[20]  Allan J. Lightman,et al.  Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites , 1999 .

[21]  Akira Todoroki,et al.  3D printing of continuous fiber reinforced plastic , 2014 .

[22]  Jürgen Fleischer,et al.  Joining automotive space frame structures by filament winding , 2013 .

[23]  Jürgen Groll,et al.  Fiber reinforcement during 3D printing , 2015 .

[24]  Neri Oxman,et al.  Variable property rapid prototyping , 2011 .

[25]  Paul M. Weaver,et al.  Continuous tow shearing for manufacturing variable angle tow composites , 2012 .

[26]  A. Simchi,et al.  Direct laser sintering of iron–graphite powder mixture , 2004 .

[27]  K. Hon,et al.  Selective Laser Sintering of SiC/Polyamide Composites , 2003 .

[28]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[29]  W. Zhong,et al.  Short fiber reinforced composites for fused deposition modeling , 2001 .

[30]  Jaret C. Riddick,et al.  Research Summary of an Additive Manufacturing Technology for the Fabrication of 3D Composites with Tailored Internal Structure , 2014 .

[31]  Andrew Y. C. Nee,et al.  Mechanical characteristics of fiber‐filled photo‐polymer used in stereolithography , 1999 .

[32]  J.-B. Le Cam,et al.  Modelling slit tape buckling during automated prepreg manufacturing: A local approach , 2011 .

[33]  Mark S. Mirotznik,et al.  Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite , 2016 .

[34]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[35]  Gunther Reinhart,et al.  Automated cutting and handling of carbon fiber fabrics in aerospace industries , 2010, 2010 IEEE International Conference on Automation Science and Engineering.

[36]  Ming-Chuan Leu,et al.  Graphite-based indirect laser sintered fuel cell bipolar plates containing carbon fiber additions , 2011 .

[37]  Jean-Pierre Kruth,et al.  Composites by rapid prototyping technology , 2010 .

[38]  Beno Benhabib,et al.  Mechanical properties of short‐fibre layered composites: prediction and experiment , 2000 .

[39]  Allan J. Lightman,et al.  Curved Layer LOM ofCeramics and Composites , 1998 .

[40]  R. Vaidyanathan,et al.  Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication , 2003 .

[41]  D. Perreux,et al.  The influence of winding patterns on the damage behaviour of filament-wound pipes , 1999 .

[42]  Christian Laval.  CADWIND 2006 – 20 years of filament winding experience , 2006 .

[43]  R. Seltzer,et al.  Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature , 2014 .

[44]  T. Nakamoto,et al.  Layered Thin Film Micro Parts Reinforced with Aligned Short Fibers in Laser Stereolithography by Applying Magnetic Field , 2012 .

[45]  A. Todoroki,et al.  Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation , 2016, Scientific Reports.

[46]  Gene Hou,et al.  CFPC material characteristics and SLS prototyping process , 2009 .

[47]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[48]  Michael L. Skinner,et al.  Trends, advances and innovations in filament winding , 2006 .

[49]  P. Calvert,et al.  Extrusion Freeform Fabrication of Chopped-Fibre Reinforced Composites , 1997 .

[50]  Richard A. Buswell,et al.  Developments in construction-scale additive manufacturing processes , 2012 .

[51]  Paul M. Weaver,et al.  Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites , 2014 .

[52]  Chee Kai Chua,et al.  3D printing and additive manufacturing : principles and applications , 2015 .

[53]  Claus Emmelmann,et al.  Laser Additive Manufacturing and Bionics: Redefining Lightweight Design , 2011 .

[54]  Xiao Hu,et al.  Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites , 2000 .

[55]  M Bohner,et al.  Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. , 2011, Acta biomaterialia.

[56]  Sami H. Rizkalla,et al.  FILAMENT-WOUND GLASS FIBER REINFORCED POLYMER BRIDGE DECK MODULES , 2003 .

[57]  Charlie R. Brooks,et al.  Failure Analysis of Engineering Materials , 2001 .

[58]  J. Czyżewski,et al.  Rapid prototyping of electrically conductive components using 3D printing technology , 2009 .

[59]  Hon Wah Wai,et al.  RP in art and conceptual design , 2001 .

[60]  A. Todoroki,et al.  3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens , 2016 .

[61]  Cristina Nan,et al.  Robotic positioning device for three-dimensional printing , 2014, ArXiv.

[62]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[63]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[64]  S. M. Sapuan,et al.  Design and fabrication of low cost filament winding machine , 2007 .

[65]  Beno Benhabib,et al.  Layered-Manufacturing of Fiber-Reinforced Composites , 1999 .

[66]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[67]  Timothy G. Gutowski,et al.  Advanced composites manufacturing , 1997 .

[68]  Gabriele Wurm,et al.  Prospective study on cranioplasty with individual carbon fiber reinforced polymer (CFRP) implants produced by means of stereolithography. , 2004, Surgical neurology.

[69]  Alida Mazzoli,et al.  Selective laser sintering in biomedical engineering , 2012, Medical & Biological Engineering & Computing.

[70]  P. Mallick.  Fiber-reinforced composites : materials, manufacturing, and design , 1989 .

[71]  Yunkai Lu.  Mechanical Properties of Random Discontinuous Fiber Composites Manufactured from Wetlay Process , 2002 .

[72]  M. Buehler,et al.  Modeling and additive manufacturing of bio-inspired composites with tunable fracture mechanical properties. , 2014, Soft matter.

[73]  Andreas Björnsson,et al.  New Automated Composite Manufacturing Process: : Is it possible to find a cost effective manufacturing method with the use of robotic equipment? , 2012 .

[74]  Hui Wang,et al.  Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties , 2017 .

[75]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[76]  Rocky S Tuan,et al.  Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture. , 2013, Biomaterials.

[77]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[78]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[79]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[80]  P. Calvert,et al.  Orientation effects in freeformed short-fiber composites , 1999 .

[81]  Carroll Grant,et al.  Automated processes for composite aircraft structure , 2006, Ind. Robot.

[82]  D. Karalekas,et al.  Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping , 2003 .

[83]  Beno Benhabib,et al.  Design of a Slot-Coater-Based Layered-Composites Manufacturing System , 2003 .