The critical limits of thermophysical properties defining the optimum heat transfer coefficient in case of spray quenching from high temperature

[1]  S. S. Mohapatra,et al.  Enhancement of upward facing spray cooling by benzene added water , 2023, Journal of Thermal Analysis and Calorimetry.

[2]  A. Sahoo,et al.  Enhancement of Spray Cooling by Modify Spray Orientation and Coolant Characteristics , 2023, International Journal of Thermofluids.

[3]  S. Chakraborty,et al.  Synthesis, characterization and application of SiO2 and CuO nanofluid in spray cooling of hot steel plate , 2023, Heat and Mass Transfer.

[4]  Zhiwu Han,et al.  Advanced Study of Spray Cooling: From Theories to Applications , 2022, Energies.

[5]  V. Srinivasan,et al.  High-efficiency spray cooling of rough surfaces with gas-assist atomization , 2022, Applied Thermal Engineering.

[6]  Shuang-Ying Wu,et al.  Transient boiling heat transfer mechanism of droplet impacting heated cylinder , 2022, International Journal of Mechanical Sciences.

[7]  S. Chakraborty,et al.  Investigation of spray cooling in an inclined nozzle-plate configuration with varying coolant temperature , 2022, Experimental Heat Transfer.

[8]  P. Chiarot,et al.  Effect of Nozzle Orientation on Electrospray Cooling , 2022, Applied Thermal Engineering.

[9]  S. S. Mohapatra,et al.  Low Mass Flux Laminar Jet Cooling with Different Additives: An Enhancement-cum-Comparative Study , 2022, Heat Transfer Engineering.

[10]  Chi-Chuan Wang,et al.  Determining the Factors Affecting the Boiling Heat Transfer Coefficient of Sintered Coated Porous Surfaces , 2021, Sustainability.

[11]  F. Kulacki,et al.  Pool boiling of a dilute emulsion: Surfactant effect on heat transfer , 2021, International Communications in Heat and Mass Transfer.

[12]  R. Xu,et al.  Spray Cooling on Enhanced Surfaces: A Review of the Progress and Mechanisms , 2021, Journal of Electronic Packaging.

[13]  E. Koos,et al.  The Impact of Nanofluids on Droplet/Spray Cooling of a Heated Surface: A Critical Review , 2020, Energies.

[14]  W. Villanueva,et al.  Upward-facing multi-nozzle spray cooling experiments for external cooling of reactor pressure vessels , 2020 .

[15]  Gholamreza Bakeri,et al.  Experimental and modeling study of heat transfer enhancement of TiO2/SiO2 hybrid nanofluids on modified surfaces in pool boiling process , 2020, The European Physical Journal Plus.

[16]  B. Swain,et al.  The Boiling Phenomena and their Proper Identification and Discrimination Methodology , 2020, Scientific Reports.

[17]  B. Zhang,et al.  Effect of Nanoparticle Type and Surfactant on Heat Transfer Enhancement in Spray Cooling , 2020 .

[18]  Surjya K. Pal,et al.  Application of binary mixed surfactant additives in jet impingement cooling of a hot steel plate , 2019, Heat and Mass Transfer.

[19]  Gholamreza Bakeri,et al.  Investigation of boiling heat transfer coefficients of different refrigerants for low fin, Turbo-B and Thermoexcel-E enhanced tubes using computational smart schemes , 2019, Journal of Thermal Analysis and Calorimetry.

[20]  S. Mohapatra,et al.  High mass flux spray quenching on an inclined surface: A novel methodology for the attainment of enhanced uniform cooling with unaltered surface morphology in transition boiling regime , 2019, International Journal of Heat and Mass Transfer.

[21]  Ni Liu,et al.  Experimental investigation of comprehensive effects of surfactant and inclined mode on spray cooling heat transfer , 2019, International Journal of Thermal Sciences.

[22]  G. Castanet,et al.  Transient evolution of the heat transfer and the vapor film thickness at the drop impact in the regime of film boiling , 2018, Physics of Fluids.

[23]  S. Mandal,et al.  Oil-in-water emulsion spray: A novel methodology for the enhancement of heat transfer rate in film boiling regime , 2018, International Communications in Heat and Mass Transfer.

[24]  A. Sahoo,et al.  The discrepancy in the prediction of surface temperatures by inverse heat conduction models for different quenching processes from very high initial surface temperature , 2018, Inverse Problems in Science and Engineering.

[25]  A. R. Pati,et al.  Upward and downward facing high mass flux spray cooling with additives: A novel technique to enhance the heat removal rate at high initial surface temperature , 2018 .

[26]  S. S. Mohapatra,et al.  Enhancement of heat removal rate of high mass flux spray cooling by sea water , 2017 .

[27]  S. S. Mohapatra,et al.  Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature , 2017 .

[28]  C. Tropea,et al.  Heat transfer in the film boiling regime: Single drop impact and spray cooling , 2017 .

[29]  S. S. Mohapatra,et al.  High mass flux spray cooling with additives of low specific heat and surface tension: A novel process to enhance the heat removal rate , 2017 .

[30]  I. Ueno,et al.  Topics on Boiling: From Fundamentals to Applications , 2017 .

[31]  Issam Mudawar,et al.  Review of drop impact on heated walls , 2017 .

[32]  S. Jun,et al.  Enhancement of Pool Boiling Heat Transfer in Water Using Sintered Copper Microporous Coatings , 2016 .

[33]  Surjya K. Pal,et al.  Surfactant-Based Cu–Water Nanofluid Spray for Heat Transfer Enhancement of High Temperature Steel Surface , 2015 .

[34]  Surjya K. Pal,et al.  Ultra fast cooling of hot steel plate by air atomized spray with salt solution , 2014 .

[35]  Surjya K. Pal,et al.  Ultra fast cooling of hot steel plate by air atomized spray with salt solution , 2013, Heat and Mass Transfer.

[36]  Surjya K. Pal,et al.  Experimental study of the effect of spray inclination on ultrafast cooling of a hot steel plate , 2013 .

[37]  Rahmatollah Khodabandeh,et al.  Influence of surface roughness on a spray cooling system with R134a. Part I: Heat transfer measurements , 2013 .

[38]  刘云飞,et al.  Inverse Estimation of Transient Heat Flux to Slab Surface , 2012 .

[39]  Fung-Bao Liu,et al.  Inverse estimation of wall heat flux by using particle swarm optimization algorithm with Gaussian mutation , 2012 .

[40]  M. Hammad,et al.  Dimensional analysis and empirical correlations for heat transfer and pressure drop in condensation and evaporation processes of flow inside micropipes: case study with carbon dioxide (CO2) , 2012 .

[41]  Wen Lih Chen,et al.  A nonlinear inverse problem in estimating the heat flux of the disc in a disc brake system , 2011 .

[42]  A Aliseda,et al.  Impact of a heterogeneous liquid droplet on a dry surface: application to the pharmaceutical industry. , 2010, Advances in colloid and interface science.

[43]  R. Issa.  Multiphase Spray Cooling Technology in Industry , 2009 .

[44]  Zhen-hua Liu,et al.  Boiling heat transfer characteristics of nanofluids jet impingement on a plate surface , 2007 .

[45]  R. Selvam,et al.  Spray Cooling Modeling: Liquid Film Thickness Effect on Heat Transfer , 2007 .

[46]  森谷 祐一,et al.  Advanced Technologies , 2005, Contemporary Endoscopic Spine Surgery.

[47]  W. Roetzel,et al.  Natural convection of nano-fluids , 2003 .

[48]  Susan McCahan,et al.  The Effect of Dissolving Salts in Water Sprays Used for Quenching a Hot Surface: Part 1—Boiling of Single Droplets , 2003 .

[49]  Susan McCahan,et al.  The Effect of Dissolving Salts in Water Sprays Used for Quenching a Hot Surface: Part 2—Spray Cooling , 2003 .

[50]  W. Roetzel,et al.  Pool boiling characteristics of nano-fluids , 2003 .

[51]  Louis C. Chow,et al.  Bubble Behavior and Nucleate Boiling Heat Transfer in Saturated FC-72 Spray Cooling , 2002 .

[52]  I. Mudawar,et al.  Film boiling heat transfer of droplet streams and sprays , 1997 .

[53]  Yue-Tzu Yang,et al.  A three-dimensional inverse heat conduction problem approach for estimating the heat flux and surface temperature of a hollow cylinder , 1997 .

[54]  L. Chow,et al.  Surface Roughness and Its Effects on the Heat Transfer Mechanism in Spray Cooling , 1992 .

[55]  J. Beck.  Surface heat flux determination using an integral method , 1968 .

[56]  Cecil Hemley.  The University Press , 1965 .

[57]  J. Kuerten,et al.  Film boiling in quench cooling with high-temperature jets , 2021 .

[58]  H. J.,et al.  Hydrodynamics , 1924, Nature.