Steady and rotating computational fluid dynamics simulations of a novel vertical axis wind turbine for small-scale power generation

A novel vertical axis wind turbine (VAWT) has been developed that consists of several asymmetric vertically-stacked stages. A computational investigation of the torque characteristics of the VAWT has been conducted using the commercial computational fluid dynamics (CFD) software CFdesign 2010. A validation study consisting of steady and rotating simulations was conducted using a Savonius rotor and good agreement was obtained with experimental data. Steady two-dimensional CFD simulations have demonstrated that the new VAWT has similar average static torque characteristics to existing Savonius rotors. Rotating three-dimensional CFD simulations were conducted at several tip speed ratios with a freestream speed of 6 m/s. The predicted dynamic torque generated by the rotor decays more rapidly with increasing tip speed ratio than the torque output of Savonius rotors due to its asymmetric design and the curvature of the outer rotor wall.

[1]  Olivier Pironneau,et al.  41. Application of the Domain Decomposition Method to the Flow around the Savonius Rotor , 2001 .

[2]  N. Fujisawa,et al.  Visualization study of the flow in and around a Savonius rotor , 1992 .

[3]  S. Sivasegaram Secondary parameters affecting the performance of resistance-type vertical-axis wind rotors , 1978 .

[4]  M. A. Kamoji,et al.  Performance tests on helical Savonius rotors , 2009 .

[5]  Nobuyuki Fujisawa,et al.  A Comparative Study of Navier-Stokes Calculations and Experiments for the Savonius Rotor , 1995 .

[6]  M. A. Kamoji,et al.  Experimental investigations on single stage, two stage and three stage conventional Savonius rotor , 2008 .

[7]  Gábor Janiga,et al.  Optimization of Savonius turbines using an obstacle shielding the returning blade , 2010 .

[8]  A. Chauvin,et al.  Drag and lift coefficients evolution of a Savonius rotor , 1989 .

[9]  Yan Li,et al.  Wind Tunnel Tests on a Different Phase Three-Stage Savonius Rotor , 2005 .

[10]  Burçin Deda Altan,et al.  An experimental and numerical study on the improvement of the performance of Savonius wind rotor , 2008 .

[11]  David Banks,et al.  A THREE-TIERED APPROACH FOR DESIGNING AND EVALUATING PERFORMANCE CHARACTERISTICS OF NOVEL WECS , 2004 .

[12]  B. F. Blackwell,et al.  Wind tunnel performance data for two- and three-bucket Savonius rotors , 1978 .

[13]  Kunio Irabu,et al.  Characteristics of wind power on Savonius rotor using a guide-box tunnel , 2007 .

[14]  Byungik Chang,et al.  Review of Computer-Aided Numerical Simulation in Wind Energy , 2013 .

[15]  M. A. Kamoji,et al.  WIND TUNNEL TESTS ON A SINGLE STAGE HELICAL SAVONIUS ROTOR , 2007 .

[16]  S. J. Savonius,et al.  The S-rotor and its applications , 1931 .

[17]  Nobuyuki Fujisawa,et al.  Experimental Study on the Aerodynamic Performance of a Savonius Rotor , 1994 .

[18]  Murat Tiryakioğlu,et al.  Design and Power Characterization of a Novel Vertical Axis Wind Energy Conversion System (VAWECS) , 2008 .

[19]  M. A. Kamoji,et al.  Experimental investigations on single stage modified Savonius rotor , 2009 .

[20]  Greg F. Naterer,et al.  Effects of stator vanes on power coefficients of a zephyr vertical axis wind turbine , 2010 .

[21]  Aaron Altman,et al.  Aerodynamics of Vertical-Axis Wind Turbines: Assessment of Accepted Wind Tunnel Blockage Practice , 2010 .

[22]  Damodar Maity,et al.  Optimum design configuration of Savonius rotor through wind tunnel experiments , 2008 .