Smart Greetthings: Smart Greenhouse Based on Internet of Things for Environmental Engineering

A greenhouse aims to provide optimum light and protect plants from the adverse climate which delivers an optimum environment for plant growth. A smart greenhouse is built with capability in environment manipulation. The smart device is installed in the greenhouse consists of many sensors, which measures environment parameters, such as temperature and air humidity. One of the environmental key parameters is temperature. The device uses this parameter to provide proper temperature for plant growth. The measured data is sent to the data server by utilizing the Message Queuing Telemetry Transport (MQTT) protocol through the Internet of Things (IoT) architecture. The smart device has succeeded in measuring parameters and performed environmental engineering. The temperature and air humidity sensors have average error measurements with values of 0.9 degrees Celsius and 7.22 percentage. Moreover, the device has been successful in transmitting the measured data by using the MQTT protocol.

[1]  Mahdi Heidari,et al.  Climate control of an agricultural greenhouse by using fuzzy logic self-tuning PID approach , 2017, 2017 23rd International Conference on Automation and Computing (ICAC).

[2]  Nanang Ismail,et al.  IoT-Based UPS Monitoring System Using MQTT Protocols , 2018, 2018 4th International Conference on Wireless and Telematics (ICWT).

[3]  Aghus Sofwan,et al.  Wireless sensor network design for landslide warning system in IoT architecture , 2017, 2017 4th International Conference on Information Technology, Computer, and Electrical Engineering (ICITACEE).

[4]  Mesud Hadzialic,et al.  Internet of Things (IoT): A review of enabling technologies, challenges, and open research issues , 2018, Comput. Networks.

[5]  Maman Somantri,et al.  Implementation of Vehicle Traffic Analysis Using Background Subtraction in the Internet of Things (IoT) Architecture , 2018, 2018 6th International Conference on Information and Communication Technology (ICoICT).

[6]  Ding Yi,et al.  Design and implementation of mobile health monitoring system based on MQTT protocol , 2016, 2016 IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC).

[7]  Rajkumar Buyya,et al.  Application-aware end-to-end delay and message loss estimation in Internet of Things (IoT) - MQTT-SN protocols , 2018, Future Gener. Comput. Syst..

[8]  Yu Yang,et al.  Precise Agricultural Greenhouses Based on the IoT and Fuzzy Control , 2016, 2016 International Conference on Intelligent Transportation, Big Data & Smart City (ICITBS).

[9]  Sherali Zeadally,et al.  Secure and lightweight communication in heterogeneous IoT environments , 2019, Internet Things.

[10]  Maman Somantri,et al.  Design of Smart Open Parking Using Background Subtraction in the IoT Architecture , 2018, 2018 2nd International Conference on Electrical Engineering and Informatics (ICon EEI).

[11]  Wanchalerm Pora,et al.  Development of Smart Water Heater Complied with MQTT and ECHONET Lite Protocols , 2018, 2018 IEEE International Conference on Consumer Electronics - Asia (ICCE-Asia).