A non-linear stiffness composite twisting I-beam

A classic structural component of mechanical engineering, the I-beam, is re-designed by adding a morphing twist functionality to the high bending stiffness inherent to the geometry of the component. The beam, as with its conventional counterpart, is made of two flanges separated by a web. Here, bi-stability is introduced from a combination of flange pre-stress, web geometry and material properties, yielding a highly non-linear twist morphing structure while keeping the low weight and the high bending stiffness of the beam. The present case study offers two twisted stable shapes and can be morphed from one stable configuration to the other by applying a snap-through twist moment to the ends of the structure. Correlation is found between tests results, finite element model data and analytical predictions, validating the modelling assumptions. A sensitivity study is also performed to understand the influence of the design parameters of the beam and loading condition on the stability of the structure. As a result, the three conflicting requirements of adaptive structures are met in a single structural entity: low mass, load-carrying capability and compliance.

[1]  S. Guest,et al.  Prestressed Morphing Bistable and Neutrally Stable Shells , 2011 .

[2]  Farhan Gandhi,et al.  Zero-v Cellular Honeycomb Flexible Skins for One-Dimensional Wing Morphing , 2007 .

[3]  Farhan Gandhi,et al.  Flexible Skins for Morphing Aircraft Using Cellular Honeycomb Cores , 2010 .

[4]  I. Bond,et al.  Morphing skins , 2008, The Aeronautical Journal (1968).

[5]  J. E. Cooper,et al.  Adaptive Stiffness Structures for Air Vehicle Drag Reduction , 2006 .

[6]  Paul M. Weaver,et al.  Bistable Prestressed Symmetric Laminates , 2010 .

[7]  Michael W. Hyer,et al.  Thermally-induced deformation behavior of unsymmetric laminates , 1998 .

[8]  Paul M. Weaver,et al.  Review of morphing concepts and materials for wind turbine blade applications , 2013 .

[9]  Michael I. Friswell,et al.  Dynamic modelling and actuation of the adaptive torsion wing , 2013 .

[10]  Carol D. Wieseman,et al.  Variable Stiffness Spar Wind-Tunnel Model Development and Testing , 2004 .

[11]  Paul M. Weaver,et al.  A zero torsional stiffness twist morphing blade as a wind turbine load alleviation device , 2013 .

[12]  Sergio Pellegrino,et al.  A Zero-Stiffness Elastic Shell Structure , 2011 .

[13]  Farhan Gandhi,et al.  Skin design studies for variable camber morphing airfoils , 2008 .

[14]  Paul M. Weaver,et al.  Pseudo-bistable self-actuated domes for morphing applications , 2012 .

[15]  George Z. Voyiadjis,et al.  Mechanics of Composite Materials with MATLAB , 2005 .

[16]  Paul M. Weaver,et al.  A concept for the generation of out-of-plane distortion from tailored FRP laminates , 2004 .

[17]  T.H.G. Megson,et al.  Aircraft structures for engineering students , 1972 .

[18]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[19]  Paul M. Weaver,et al.  Multi-stable composite twisting structure for morphing applications , 2012, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[20]  Farhan Gandhi,et al.  Flexible Matrix Composite Skins for One-dimensional Wing Morphing , 2010 .

[21]  Paul M. Weaver,et al.  Bistable prestressed buckled laminates , 2008 .

[22]  Keith A. Seffen,et al.  ‘Morphing’ bistable orthotropic elliptical shallow shells , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[23]  Paul M. Weaver,et al.  A Morphing Composite Air Inlet with Multiple Stable Shapes , 2011 .

[24]  Paul M. Weaver,et al.  Analysis of unsymmetric CFRP–metal hybrid laminates for use in adaptive structures , 2010 .

[25]  Sergio Pellegrino,et al.  Bistable prestressed shell structures , 2004 .

[26]  Sergio Pellegrino,et al.  Analytical models for bistable cylindrical shells , 2006, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[27]  Marc R. Schultz,et al.  A Concept for Airfoil-like Active Bistable Twisting Structures , 2008 .

[28]  Paul M. Weaver,et al.  Phenomena in the bifurcation of unsymmetric composite plates , 2007 .

[29]  P. C. Chen,et al.  Variable Stiffness Spar Approach for Aircraft Maneuver Enhancement Using ASTROS , 2000 .

[30]  Michael W. Hyer,et al.  The Room-Temperature Shapes of Four-Layer Unsymmetric Cross-Ply Laminates , 1982 .

[31]  L. Kollár,et al.  Mechanics of Composite Structures , 2003 .