Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings

[1]  J. Musil,et al.  Plasma-sprayed duplex and graded partially stabilized zirconia thermal barrier coatings: deposition process and properties , 1997 .

[2]  Yong Qing Fu,et al.  Functionally graded ZrO2-NiCrAlY coatings prepared by plasma spraying using pre-mixed, spheroidized powders , 1997 .

[3]  U. Paik,et al.  Residual stress and thermal properties of zirconia/metal (nickel, stainless steel 304) functionally graded materials fabricated by hot pressing , 1997 .

[4]  Christer Persson,et al.  Modelled and measured residual stresses in plasma sprayed thermal barrier coatings , 1997 .

[5]  K. Kokini,et al.  Thermal fracture mechanisms in ceramic thermal barrier coatings , 1997 .

[6]  Y. Chuang,et al.  Measurements of residual stress and bond strength of plasma sprayed laminated coatings , 1997 .

[7]  Klod Kokini,et al.  Surface thermal cracking of thermal barrier coatings owing to stress relaxation: zirconia vs. mullite , 1996 .

[8]  A. Grimaud,et al.  Residual stress evolution during the thermal cycling of plasma-sprayed zirconia coatings , 1996 .

[9]  T. Hanabusa,et al.  X-Ray residual stress measurement of laminated-coating layers produced by plasma spraying , 1993 .

[10]  P. M. Pierz.  Thermal barrier coating development for diesel engine aluminum pistons , 1993 .

[11]  K. Faber,et al.  X-ray residual stress analysis of a ceramic thermal barrier coating undergoing thermal cycling , 1993 .

[12]  H. Burlet,et al.  Thermochemical experiments and numerical simulation of ceramic coatings , 1993 .

[13]  James F. Shackelford,et al.  The CRC Materials Science And Engineering Handbook , 1991 .

[14]  Maurizio Marchese,et al.  Computer simulation of plasma-sprayed coatings II. Effective bulk properties and thermal stress calculations , 1991 .

[15]  O. Knotek,et al.  Calculation of residual thermal stress in plasma-sprayed coatings , 1990 .

[16]  K. Takeda,et al.  Modelling of residual stress in plasma-sprayed coatings: Effect of substrate temperature , 1990 .

[17]  Seiji Kuroda,et al.  Simultaneous measurement of coating thickness and deposition stress during thermal spraying , 1988 .

[18]  Carl E. Lowell,et al.  Failure mechanisms of thermal barrier coatings exposed to elevated temperatures , 1982 .

[19]  高温学会,et al.  Thermal spray : meeting the challenges of the 21st century : proceedings of the 15th Intenational Thermal Spray Conference, 25-29 May, 1998, Nice, France , 1998 .