The activation/depassivation of nickel-chromium-molybdenum alloys: An oxyanion or a pH effect—Part II

[1]  M. Biesinger,et al.  The activation/depassivation of nickel–chromium–molybdenum alloys in bicarbonate solution: Part I , 2013 .

[2]  D. Shoesmith,et al.  Characterization of surface composition on Alloy 22 in neutral chloride solutions , 2013 .

[3]  D. Shoesmith,et al.  Characterization of film properties on the NiCrMo Alloy C-2000 , 2013 .

[4]  C. Giordano,et al.  Crevice corrosion kinetics of nickel alloys bearing chromium and molybdenum , 2012 .

[5]  A. Ares,et al.  Effect of Temperature and Chloride Concentration on the Anodic Behavior of Nickel Alloys in Bicarbonate Solutions , 2012 .

[6]  D. Shoesmith,et al.  Crevice corrosion initiation and propagation on Alloy-22 under galvanically-coupled and galvanostatic conditions , 2011 .

[7]  D. Shoesmith,et al.  The impedance properties of the oxide film on the Ni–Cr–Mo Alloy-22 in neutral concentrated sodium chloride solution , 2011 .

[8]  D. Shoesmith,et al.  Corrosion product analysis on crevice corroded Alloy-22 specimens , 2011 .

[9]  Andrea R. Gerson,et al.  Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn , 2010 .

[10]  R. Rebak,et al.  Determination of the Crevice Corrosion Stabilization and Repassivation Potentials of a Corrosion-Resistant Alloy , 2010 .

[11]  J. Payer,et al.  Characterization of the Corrosion Products of Crevice Corroded Alloy 22 , 2009 .

[12]  M. Biesinger,et al.  X‐ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems , 2009 .

[13]  G. Frankel,et al.  Crevice Corrosion Repassivation of Alloy 22 in Aggressive Environments , 2008 .

[14]  G. Cragnolino,et al.  Effect of simulated groundwater chemistry on stress corrosion cracking of alloy 22 , 2007 .

[15]  C. Orme,et al.  Influence of Chromium and Molybdenum on the Corrosion of Nickel Based Alloys , 2006 .

[16]  L. Wong,et al.  Using electrochemical methods to determine alloy 22’s crevice corrosion repassivation potential , 2005 .

[17]  N. McIntyre,et al.  The open-circuit ennoblement of alloy C-22 and other Ni-Cr-Mo alloys , 2005 .

[18]  D. Shoesmith,et al.  Cr, Mo and W alloying additions in Ni and their effect on passivity , 2004 .

[19]  L. Wong,et al.  Slow Strain Rate Testing of Alloy 22 in Simulated Concentrated Ground Waters , 2003 .

[20]  N. McIntyre,et al.  Effects of Temperature and Potential on the Passive Corrosion Properties of Alloys C22 and C276 , 2003 .

[21]  G. Gordon.  F.N. Speller Award Lecture: Corrosion Considerations Related to Permanent Disposal of High-Level Radioactive Waste , 2002 .

[22]  G. Gordon,et al.  Susceptibility of Alloy 22 to Environmentally Assisted Cracking in Yucca Mountain Relevant Environments , 2002 .

[23]  W. Friend.  Corrosion of Nickel and Nickel‐Base Alloys , 1980 .