Influence of surface topography in the boiling mechanisms

[1]  S. Nukiyama.  The Maximum and Minimum Values of the Heat Q Transmitted from Metal to Boiling Water under Atmospheric Pressure , 1966 .

[2]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[3]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[4]  J. S. Busch,et al.  POOL BOILING HEAT TRANSFER WITH MERCURY , 1956 .

[5]  S. Bankoff.  Entrapment of gas in the spreading of a liquid over a rough surface , 1958 .

[6]  N. Zuber.  Hydrodynamic aspects of boiling heat transfer (thesis) , 1959 .

[7]  J. E. Myers,et al.  The effects of superheat and surface roughness on boiling coefficients , 1960 .

[8]  F. Schmidt,et al.  Measured Variations in Local Surface Temperatures in Pool Boiling of Water , 1961 .

[9]  P. J. Berenson.  Experiments on pool-boiling heat transfer , 1962 .

[10]  P. J. Marto,et al.  Effects of surface conditions on nucleate pool boiling of sodium. , 1966 .

[11]  S. Nukiyama.  The maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressure , 1966 .

[12]  J. Westwater,et al.  Heat transfer from multiple spines to boiling liquids , 1971 .

[13]  J. Lienhard,et al.  Peak Pool Boiling Heat-Flux Measurements on Finite Horizontal Flat Plates , 1973 .

[14]  W. Rohsenow,et al.  Effects of Surface Conditions on Boiling Characteristics , 1974 .

[15]  K. Mizukami.  Entrapment of vapor in reentrant cavities , 1975 .

[16]  K. Bier,et al.  Effect of pressure and surface roughness on pool boiling of refrigerants , 1979 .

[17]  R. Judd,et al.  The Nature of Nucleation Site Interaction , 1980 .

[18]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[19]  T. Forest.  The stability of gaseous nuclei at liquid‐solid interfaces , 1982 .

[20]  R. P. Benedict,et al.  ASME Measurement Uncertainty , 1985 .

[21]  S. Nishio.  Stability of preexisting vapor nucleus in uniform temperature field. , 1988 .

[22]  R. Judd.  On Nucleation Site Interaction , 1988 .

[23]  A. Bergles,et al.  Effects of Size of Simulated Microelectronic Chips on Boiling and Critical Heat Flux , 1988 .

[24]  I. Mudawar,et al.  Microelectronic Cooling by Enhanced Pool Boiling of a Dielectric Fluorocarbon Liquid , 1989 .

[25]  K. Stephan.  Heat Transfer in Condensation and Boiling , 1992 .

[26]  V. Dhir,et al.  On the Gas Entrapment and Nucleation Site Density During Pool Boiling of Saturated Water , 1992 .

[27]  R. Judd,et al.  Interaction of the Nucleation Processes Occurring at Adjacent Nucleation Sites , 1993 .

[28]  Experimental and statistical investigation of changes in surface roughness associated with spray quenching , 1996 .

[29]  R. Yeh.  Analysis of thermally optimized fin array in boiling liquids , 1997 .

[30]  V. Dhir.  BOILING HEAT TRANSFER , 1998 .

[31]  Issam Mudawar.  Assessment of high-heat-flux thermal management schemes , 2001 .

[32]  S. Kandlikar.  A Theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation , 2001 .

[33]  R. F. Kelbaliev.  Heat transfer under boiling of liquids at pressures close to the critical pressure , 2002 .

[34]  H. Honda,et al.  Enhanced Boiling of FC-72 on Silicon Chips with Micro-Pin-Fins and Submicron-Scale Roughness , 2002 .

[35]  Lei Zhang,et al.  Nucleation site interaction in pool boiling on the artificial surface , 2003 .

[36]  H. Honda,et al.  Effects of Fin Geometry on Boiling Heat Transfer from Silicon Chips with Micro-Pin-Fins Immersed in FC-72 , 2003 .

[37]  W. Rohsenow,et al.  Nucleate pool-boiling heat transfer. I: review of parametric effects of boiling surface , 2004 .

[38]  G. Ribatski,et al.  Evaluation of the rohsenow correlation through experimental pool boiling of halocarbon refrigerants on cylindrical surfaces , 2004 .

[39]  Jinjia Wei,et al.  Experimental study of boiling phenomena and heat transfer performances of FC-72 over micro-pin-finned silicon chips , 2005 .

[40]  R. Jaeger,et al.  Effect of nucleation site spacing on the pool boiling characteristics of a structured surface , 2006 .

[41]  T. C. Cheng,et al.  Pool boiling heat transfer on artificial micro-cavity surfaces in dielectric fluid FC-72 , 2006 .

[42]  M. Kim,et al.  On the growth behavior of bubbles during saturated nucleate pool boiling at sub-atmospheric pressure , 2007 .

[43]  S. M. You,et al.  Enhancement of pool boiling critical heat flux in dielectric liquids by microporous coatings , 2007 .

[44]  A. Moita,et al.  Drop impacts onto cold and heated rigid surfaces : Morphological comparisons, disintegration limits and secondary atomization , 2007 .

[45]  J. Thome,et al.  NUCLEATE BOILING ON MICRO-STRUCTURED SURFACES , 2008 .

[46]  P. Marty,et al.  How does surface wettability influence nucleate boiling , 2009 .

[47]  P. Marty,et al.  Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism , 2009 .

[48]  A. Luke.  Preparation and analysis of different roughness structures for evaporator tubes , 2009 .

[49]  D. Gorenflo,et al.  Heat transfer and bubble formation on horizontal copper tubes with different diameters and roughness structures , 2009 .

[50]  P. Marty,et al.  How surface wettability influences nucleate boiling , 2009 .

[51]  M. Kim,et al.  Pool boiling CHF enhancement by micro/nanoscale modification of zircaloy-4 surface , 2010 .

[52]  S. M. You,et al.  Effects of pressure, orientation, and heater size on pool boiling of water with nanocoated heaters , 2010 .

[53]  John P. McHale,et al.  Bubble nucleation characteristics in pool boiling of a wetting liquid on smooth and rough surfaces , 2010 .

[54]  S. Kandlikar,et al.  Effects of nanowire height on pool boiling performance of water on silicon chips , 2011 .

[55]  M. Kim,et al.  A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces , 2011 .

[56]  M. Marengo,et al.  Influence of the wettability on the boiling onset. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[57]  E. Wang,et al.  Structured surfaces for enhanced pool boiling heat transfer , 2012 .

[58]  T. Wetzel,et al.  Boiling heat transfer , 2012 .

[59]  A. Moita,et al.  Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions , 2012 .

[60]  A. Moita,et al.  Enhancement of pool boiling heat transfer by surface micro-structuring , 2012 .

[61]  A. Moita,et al.  Characterization of pool boiling mechanisms over micro-patterned surfaces using PIV , 2013 .

[62]  C. Kim,et al.  Boiling heat transfer on superhydrophilic, superhydrophobic, and superbiphilic surfaces , 2012, International Journal of Heat and Mass Transfer.

[63]  M. Marengo,et al.  Enhancing the onset of pool boiling by wettability modification on nanometrically smooth surfaces , 2013 .

[64]  T. Khan,et al.  Investigation of heat transfer in porous duct , 2016 .