Tailored PVDF Graft Copolymers via ATRP as High-Performance NCM811 Cathode Binders

[1]  Dezhen Wu,et al.  Self-adaptive Gel Poly(imide-siloxane) Binder Ensuring Stable Cathode-Electrolyte Interface for Achieving High-Performance NCM811 Cathode in Lithium-ion Batteries , 2023, Energy Storage Materials.

[2]  Junhua Song,et al.  Locally Superconcentrated Electrolytes for Ultra-Fast-Charging Lithium Metal Batteries with High-Voltage Cathodes , 2022, ACS Energy Letters.

[3]  Y. Meng,et al.  Rational design of thermally stable polymorphic layered cathode materials for next generation lithium rechargeable batteries , 2022, Materials Today.

[4]  J. Tarascon.  Material science as a cornerstone driving battery research , 2022, Nature Materials.

[5]  Dezhen Wu,et al.  Novel polyimide binders integrated with soft and hard functional segments ensuring long-term high-voltage operating stability of high-energy NCM811 lithium-ion batteries up to 4.5 V , 2022, Applied Energy.

[6]  Dezhen Wu,et al.  Enhanced Electrochemical Performance of the LiNi0.8Co0.1Mn0.1O2 Cathode via In-situ Nanoscale Surface Modification with Poly(imide-siloxane) Binder , 2022, Chemical Engineering Journal.

[7]  Nam-Yung Park,et al.  Degradation Mechanism of Ni-Rich Cathode Materials: Focusing on Particle Interior , 2022, ACS Energy Letters.

[8]  Liquan Chen,et al.  Stable Ni-rich layered oxide cathode for sulfide all-solid-state lithium battery , 2022, eScience.

[9]  G. Cui,et al.  Interfacial Chemistry of Vinylphenol-Grafted Pvdf Binder Ensuring Compatible Cathode Interphase for Lithium Batteries , 2022, SSRN Electronic Journal.

[10]  Ling Huang,et al.  Investigation and Suppression of Oxygen Release by LiNi0.8Co0.1Mn0.1O2 Cathode under Overcharge Conditions , 2022, Advanced Energy Materials.

[11]  Seok Woo Lee,et al.  Understanding the Role of a Water-Soluble Catechol-Functionalized Binder for Silicon Anodes by Diverse In Situ Analyses , 2022, ACS Materials Letters.

[12]  J. Whitacre,et al.  Polymer-Stabilized Liquid Metal Nanoparticles as a Scalable Current Collector Engineering Approach Enabling Lithium Metal Anodes , 2022, ACS Applied Energy Materials.

[13]  Ping Nie,et al.  A three-in-one engineering strategy to achieve LiNi0.8Co0.1Mn0.1O2 cathodes with enhanced high-voltage cycle stability and high-rate capacities towards lithium storage , 2022, Journal of Power Sources.

[14]  Dong‐Won Kim,et al.  All-Solid-State Lithium Batteries: Li+-Conducting Ionomer Binder for Dry-Processed Composite Cathodes , 2022, ACS Energy Letters.

[15]  Y. Meng,et al.  Elucidating the Effect of Borate Additive in High‐Voltage Electrolyte for Li‐Rich Layered Oxide Materials , 2022, Advanced Energy Materials.

[16]  Jie Xiao,et al.  To Pave the Way for Large-Scale Electrode Processing of Moisture-Sensitive Ni-Rich Cathodes , 2022, Journal of The Electrochemical Society.

[17]  Xiaogang Zhang,et al.  Effects of binder content on low-cost solvent-free electrodes made by dry-spraying manufacturing for lithium-ion batteries , 2021, Journal of Power Sources.

[18]  Sang‐young Lee,et al.  Amphiphilic Bottlebrush Polymeric Binders for High‐Mass‐Loading Cathodes in Lithium‐Ion Batteries , 2021, Advanced Energy Materials.

[19]  C. Yoon,et al.  Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries , 2021, Nature Communications.

[20]  J. Whitacre,et al.  Functional polymers for lithium metal batteries , 2021, Progress in Polymer Science.

[21]  Xuefeng Wang,et al.  Cryo-EM for battery materials and interfaces: Workflow, achievements, and perspectives , 2021, iScience.

[22]  J. Tarascon,et al.  Self‐Healing: An Emerging Technology for Next‐Generation Smart Batteries , 2021, Advanced Energy Materials.

[23]  Chaoyang Wang,et al.  High safety and cycling stability of ultrahigh energy lithium ion batteries , 2021, Cell Reports Physical Science.

[24]  C. Yoon,et al.  Capacity Fading Mechanisms in Ni-Rich Single-Crystal NCM Cathodes , 2021, ACS Energy Letters.

[25]  C. Iojoiu,et al.  Lithium Phosphonate Functionalized Polymer Coating for High‐Energy Li[Ni0.8Co0.1Mn0.1]O2 with Superior Performance at Ambient and Elevated Temperatures , 2021, Advanced Functional Materials.

[26]  S. Wachs,et al.  Online Monitoring of Transition-Metal Dissolution from a High-Ni-Content Cathode Material. , 2021, ACS applied materials & interfaces.

[27]  Junda Huang,et al.  Hexafluoroisopropyl Trifluoromethanesulfonate‐Driven Easily Li+ Desolvated Electrolyte to Afford Li||NCM811 Cells with Efficient Anode/Cathode Electrolyte Interphases , 2021, Advanced Functional Materials.

[28]  D. Guyomard,et al.  Influence of the Polyacrylic Acid Binder Neutralization Degree on the Initial Electrochemical Behavior of a Silicon/Graphite Electrode. , 2021, ACS applied materials & interfaces.

[29]  G. Cui,et al.  How Do Polymer Binders Assist Transition Metal Oxide Cathodes to Address the Challenge of High-Voltage Lithium Battery Applications? , 2021, Electrochemical Energy Reviews.

[30]  Y. Meng,et al.  Enabling the Low-Temperature Cycling of NMC||Graphite Pouch Cells with an Ester-Based Electrolyte , 2021, ACS Energy Letters.

[31]  Jeremiah A. Johnson,et al.  Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte , 2021, Nature Energy.

[32]  A. Manthiram,et al.  A review on the stability and surface modification of layered transition-metal oxide cathodes , 2021, Materials Today.

[33]  Jaephil Cho,et al.  Replacing conventional battery electrolyte additives with dioxolone derivatives for high-energy-density lithium-ion batteries , 2021, Nature Communications.

[34]  A. Mauger,et al.  NCA, NCM811, and the Route to Ni-Richer Lithium-Ion Batteries , 2020 .

[35]  C. Hawker,et al.  Reversible-deactivation radical polymerization (Controlled/living radical polymerization): From discovery to materials design and applications , 2020, Progress in Polymer Science.

[36]  D. Hall,et al.  Prospects for lithium-ion batteries and beyond—a 2030 vision , 2020, Nature Communications.

[37]  Yi Cui,et al.  Cathode-Electrolyte Interphase in Lithium Batteries Revealed by Cryogenic Electron Microscopy , 2020 .

[38]  J. Whitacre,et al.  Grafting polymer from oxygen-vacancy-rich nanoparticles to enable protective layers for stable lithium metal anode , 2020 .

[39]  U. Schubert,et al.  Polymers for Battery Applications—Active Materials, Membranes, and Binders , 2020, Advanced Energy Materials.

[40]  Wangda Li,et al.  Long-Term Cyclability of NCM-811 at High Voltages in Lithium-Ion Batteries: an In-Depth Diagnostic Study , 2020 .

[41]  Seung‐Hwan Lee,et al.  Use of carbon coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced performances of lithium-ion batteries , 2020, Scientific Reports.

[42]  Q. Qu,et al.  Anchoring Interfacial Nickel Cations on Single-Crystal LiNi0.8Co0.1Mn0.1O2 Cathode Surface via Controllable Electron Transfer , 2020 .

[43]  J. Choi,et al.  Highly Elastic Binder for Improved Cyclability of Nickel‐Rich Layered Cathode Materials in Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[44]  D. Weber,et al.  Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte , 2020, Journal of The Electrochemical Society.

[45]  C. Kuss,et al.  Review—Conducting Polymer-Based Binders for Lithium-Ion Batteries and Beyond , 2020, Journal of The Electrochemical Society.

[46]  Arumugam Manthiram,et al.  A reflection on lithium-ion battery cathode chemistry , 2020, Nature Communications.

[47]  C. Daniel,et al.  Influence of Binder Coverage on Interfacial Chemistry of Thin Film LiNi0.6Mn0.2Co0.2O2 Cathodes , 2020, Journal of The Electrochemical Society.

[48]  Yong‐Mook Kang,et al.  Advances in the Cathode Materials for Making a Breakthrough in the Li Rechargeable Batteries. , 2020, Angewandte Chemie.

[49]  I. Bloom,et al.  Revisiting the Mechanism Behind Transition-Metal Dissolution from Delithiated LiNixMnyCozO2 (NMC) Cathodes , 2020 .

[50]  Evan M. Erickson,et al.  High-nickel layered oxide cathodes for lithium-based automotive batteries , 2020 .

[51]  J. Janek,et al.  The Role of Intragranular Nanopores in Capacity Fade of Nickel-Rich Layered Li(Ni1-x-yCoxMny)O2 Cathode Materials. , 2019, ACS nano.

[52]  Y. Aihara,et al.  Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach , 2019, Energy Storage Materials.

[53]  J. Whitacre,et al.  A Semiliquid Lithium Metal Anode , 2019, Joule.

[54]  Tongchao Liu,et al.  Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control. , 2019, Accounts of chemical research.

[55]  Zonghai Chen,et al.  Surface Modification for Suppressing Interfacial Parasitic Reactions of a Nickel-Rich Lithium-Ion Cathode , 2019, Chemistry of Materials.

[56]  Yong Yang,et al.  Degradation mechanisms of C6/LiNi0.5Mn0.3Co0.2O2 Li-ion batteries unraveled by non-destructive and post-mortem methods , 2019, Journal of Power Sources.

[57]  Yang-Tse Cheng,et al.  Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries , 2019, Journal of Power Sources.

[58]  Min Ling,et al.  Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices. , 2018, Chemical reviews.

[59]  W. Zhong,et al.  Poly(Vinylidene Fluoride)‐Based Blends as New Binders for Lithium‐Ion Batteries , 2018, ChemElectroChem.

[60]  K. Matyjaszewski.  Advanced Materials by Atom Transfer Radical Polymerization , 2018, Advanced materials.

[61]  Jean-Marie Tarascon,et al.  Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries , 2018 .

[62]  J. Whitacre,et al.  Single-ion Homopolymer Electrolytes with High Transference Number Prepared by Click Chemistry and Photoinduced Metal-free ATRP , 2018 .

[63]  Xingyi Zhou,et al.  Material and Structural Design of Novel Binder Systems for High-Energy, High-Power Lithium-Ion Batteries. , 2017, Accounts of chemical research.

[64]  Jianrong Chen,et al.  Surface modification of polyvinylidene fluoride (PVDF) membrane via radiation grafting: novel mechanisms underlying the interesting enhanced membrane performance , 2017, Scientific Reports.

[65]  K. Matyjaszewski,et al.  Atom Transfer Radical Polymerization with Different Halides (F, Cl, Br, and I): Is the Process “Living” in the Presence of Fluorinated Initiators? , 2017 .

[66]  Krzysztof Matyjaszewski,et al.  Macromolecular engineering by atom transfer radical polymerization. , 2014, Journal of the American Chemical Society.

[67]  Krzysztof Matyjaszewski,et al.  Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives , 2012 .

[68]  M. Biesinger,et al.  The role of the Auger parameter in XPS studies of nickel metal, halides and oxides. , 2012, Physical chemistry chemical physics : PCCP.

[69]  Krzysztof Matyjaszewski,et al.  Architecturally Complex Polymers with Controlled Heterogeneity , 2011, Science.

[70]  Krzysztof Matyjaszewski,et al.  Nanostructured functional materials prepared by atom transfer radical polymerization , 2009, Nature Chemistry.

[71]  T. Russell,et al.  Graft Copolymers from Poly(vinylidene fluoride-co-chlorotrifluoroethylene) via Atom Transfer Radical Polymerization , 2006 .

[72]  A. Mayes,et al.  ATRP of Amphiphilic Graft Copolymers Based on PVDF and Their Use as Membrane Additives , 2002 .

[73]  A. Davidson,et al.  Spectroscopic Studies of Nickel(II) and Nickel(III) Species Generated upon Thermal Treatments of Nickel/Ceria-Supported Materials , 1996 .

[74]  H. Gasteiger,et al.  Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cells , 2019, Journal of The Electrochemical Society.

[75]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .