A LabVIEW based test system to characterize phasor measurement units

Phaser measurement units (PMUs) have become indispensable elements of a reliable power system network and the ability to make precise time synchronized measurements with the best possible accuracy have made these devices to be the best choice for wide area operation, protection and control in a large power system. Due to the widespread use of synchrophasor measurements, it becomes necessary to characterize each PMU based on their performance and select the appropriate device for the required application. Furthermore, the IEEE Std C37.118.1a-2014 mandates the latest performance standards for the commercial PMUs and classifies them based on their performance. This necessitates the development of a test-bed which is capable of testing different PMUs to check whether they comply with the latest IEEE standard and also to characterize the devices in terms of their accuracy and precision. This paper describes a LabVIEW based PMU testing and calibration system that was developed at Virginia Tech with the support of NIST and is capable of performing the latest steady state, dynamic and latency tests as described in the IEEE Synchrophasor standard. The testing system also provides flexibility by automatic and manual modes of operation to allow the characterization of PMUs based on the requirements of the test operator.

[1]  Kang Lee,et al.  IEEE 1588 standard for a precision clock synchronization protocol for networked measurement and control systems , 2002, 2nd ISA/IEEE Sensors for Industry Conference,.

[2]  Gerard N. Stenbakken.  Calculating combined amplitude and phase modulated power signal parameters , 2011, 2011 IEEE Power and Energy Society General Meeting.

[3]  Ming Zhou,et al.  Reference Values for Dynamic Calibration of PMUs , 2008, Proceedings of the 41st Annual Hawaii International Conference on System Sciences (HICSS 2008).

[4]  M. Kezunovic,et al.  Dynamic characterization of PMUs using step signals , 2009, 2009 IEEE Power & Energy Society General Meeting.

[5]  Kenneth E. Martin,et al.  Synchrophasor standards and guides for the smart grid , 2013, 2013 IEEE Power & Energy Society General Meeting.

[6]  James S. Thorp,et al.  IEEE Standard for Synchrophasors for Power Systems , 1998 .

[7]  V. Skendzic,et al.  Standard profile for use of IEEE std 1588-2008 precision time protocol (PTP) in power system applications , 2013, 2013 66th Annual Conference for Protective Relay Engineers.

[8]  Ming Zhou,et al.  Dynamic Phasor Measurement Unit Test System , 2007, 2007 IEEE Power Engineering Society General Meeting.

[9]  F. Harris.  On the use of windows for harmonic analysis with the discrete Fourier transform , 1978, Proceedings of the IEEE.

[10]  A.G. Phadke,et al.  Exploring the IEEE Standard C37.118–2005 Synchrophasors for Power Systems , 2008, IEEE Transactions on Power Delivery.

[11]  J. Thorp,et al.  A New Measurement Technique for Tracking Voltage Phasors, Local System Frequency, and Rate of Change of Frequency , 1983, IEEE Transactions on Power Apparatus and Systems.

[12]  Kenneth E. Martin,et al.  Synchrophasor Measurements Under the IEEE Standard C37.118.1-2011 With Amendment C37.118.1a , 2015, IEEE Transactions on Power Delivery.