Adaptive Current Source Drivers for Efficiency Optimization of High-Frequency Synchronous Buck Converters

In this paper, the concept of the adaptive current source drivers (CSDs) is proposed for the high-frequency synchronous buck converters. Compared to the previous CSD circuits, the adaptive CSD can achieve adjustable drive current and drive voltage according to different load condition. The benefit is that higher drive current and voltage lead to lower switching loss and conduction loss when the load current increases. Therefore, the adaptive CSD is able to realize optimal design to reduce the switching loss, the gate drive loss, and the conduction loss in a wide load range. It should be noted that the adaptive concept is suitable for both the continuous and discontinuous CSDs regardless the drive circuit topologies. Through investigating the CSD circuits, one simple method to achieve the adaptive drive current based on the adaptive voltage is proposed. A 12 V input, 1.3 V output, and 1-MHz synchronous buck converter with the continuous and discontinuous CSDs was built, respectively, to verify the advantages of the proposed adaptive concept and efficiency improvement.

[1]  F.C. Lee,et al.  Evaluation of Self-Driven Schemes for a 12-V Self-Driven Voltage Regulator , 2009, IEEE Transactions on Power Electronics.

[2]  M. Swamy,et al.  An Efficient Resonant Gate-Drive Scheme for High-Frequency Applications , 2011, IEEE Transactions on Industry Applications.

[3]  W. Eberle,et al.  Optimal Design of Resonant Gate Driver for Buck Converter Based on a New Analytical Loss Model , 2008, IEEE Transactions on Power Electronics.

[4]  Sheng Ye,et al.  A New Dual-Channel Resonant Gate Drive Circuit for Low Gate Drive Loss and Low Switching Loss , 2008, IEEE Transactions on Power Electronics.

[5]  M.M. Jovanovic,et al.  1.8-MHz, 48-V Resonant VRM: Analysis, Design, and Performance Evaluation , 2006, IEEE Transactions on Power Electronics.

[6]  Yan-Fei Liu,et al.  A New High Efficiency Current Source Driver With Bipolar Gate Voltage , 2012, IEEE Transactions on Power Electronics.

[7]  Alex Huang,et al.  A new resonant gate driver for switching loss reduction of high side switch in buck converter , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[8]  F. C. Lee,et al.  A novel resonant gate driver for high frequency synchronous buck converters , 2002 .

[9]  W. Eberle,et al.  A Current Source Gate Driver Achieving Switching Loss Savings and Gate Energy Recovery at 1-MHz , 2008, IEEE Transactions on Power Electronics.

[10]  Hideaki Fujita.  A Resonant Gate-Drive Circuit Capable of High-Frequency and High-Efficiency Operation , 2010 .

[11]  Dragan Maksimovic,et al.  A MOS gate drive with resonant transitions , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[12]  Michael A. E. Andersen,et al.  A VHF class E DC-DC converter with self-oscillating gate driver , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[13]  D.J. Perreault,et al.  Transistor Selection and Design of a VHF DC-DC Power Converter , 2008, IEEE Transactions on Power Electronics.

[14]  Pengcheng Xu,et al.  Adaptive Current Source Drivers for MHz Power Factor Correction , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[15]  Yan-Fei Liu,et al.  Switching loss analysis considering parasitic loop inductance with current source drivers for buck converters , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[16]  F.C. Lee,et al.  12V VR Efficiency Improvement based on Two-stage Approach and a Novel Gate Driver , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[17]  P. Mattavelli,et al.  Effects of Parasitic Components in High-FrequencyResonant Drivers for SynchronousRectification MOSFETs , 2008, IEEE Transactions on Power Electronics.

[18]  W. Eberle,et al.  A 1-MHz High-Efficiency 12-V Buck Voltage Regulator With a New Current-Source Gate Driver , 2008, IEEE Transactions on Power Electronics.

[19]  Yan-Fei Liu,et al.  A non-isolated ZVS self-driven current tripler topology for low voltage and high current applications , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[20]  Shirui Pan,et al.  A New Pulse Resonant MOSFET Gate Driver with Efficient Energy Recovery , 2006 .

[21]  Zhiliang Zhang,et al.  Discontinuous-Current-Source Drivers for High-Frequency Power MOSFETs , 2010, IEEE Transactions on Power Electronics.

[22]  Zhiliang Zhang,et al.  A 1-MHz, 12-V ZVS Nonisolated Full-Bridge VRM With Gate Energy Recovery , 2010, IEEE Transactions on Power Electronics.

[23]  Sheng Ye,et al.  A New Resonant Gate Drive Circuit for Synchronous Buck Converter , 2007, IEEE Transactions on Power Electronics.

[24]  Quan Li,et al.  The Power Loss Optimization of a Current Fed ZVS Two-Inductor Boost Converter With a Resonant Transition Gate Drive , 2006, IEEE Transactions on Power Electronics.