Multi-objective optimization of a flexible slider-crank mechanism synthesis, based on dynamic responses
暂无分享,去创建一个
Nizar Aifaoui | Mohamed Amine Ben Abdallah | Imed Khemili | N. Aifaoui | M. B. Ben Abdallah | Imed Khemili
[1] Peng Dong,et al. Design and analysis of a novel multi-speed automatic transmission with four degrees-of-freedom , 2017 .
[2] F. T. S. Marı́n,et al. Global optimization in path synthesis based on design space reduction , 2003 .
[3] Jorge Ambrósio,et al. Optimization of a complex flexible multibody systems with composite materials , 2007 .
[4] Saban Cetin,et al. Modeling and control of a nonlinear half-vehicle suspension system: a hybrid fuzzy logic approach , 2012 .
[5] Peng Wang,et al. Multidisciplinary optimization design of a new underwater vehicle with highly efficient gradient calculation , 2017 .
[6] Serdar Kucuk,et al. Energy minimization for 3-RRR fully planar parallel manipulator using particle swarm optimization , 2013 .
[7] Chang Wang,et al. Type synthesis and analysis of rotational parallel mechanisms with a virtual continuous axis , 2017 .
[8] Ali Jamali,et al. Path synthesis of four-bar mechanisms using synergy of polynomial neural network and Stackelberg game theory , 2017 .
[9] Shawn R. Wilhelm,et al. Solution rectification of slider-crank mechanisms with transmission angle control , 2017 .
[10] Antonio Moreno Ortiz,et al. An evolutionary algorithm for path synthesis of mechanisms , 2011 .
[11] L Romdhane,et al. Dynamic analysis of planar elastic mechanisms using the dyad method , 2003 .
[12] Juan J. Castillo,et al. Evolutionary synthesis of mechanisms applied to the design of an exoskeleton for finger rehabilitation , 2016 .
[13] Prasad Vilas Chanekar,et al. Synthesis of adjustable spherical four-link mechanisms for approximate multi-path generation , 2013 .
[14] Qiong Shen,et al. Expanded spatial four-link motion and path generation with order and branch defect elimination , 2013 .
[15] Clément Gosselin,et al. Synthesis, optimization and experimental validation of reactionless two-DOF parallel mechanisms using counter-mechanisms , 2016 .
[16] Andrew Lewis,et al. Autonomous Particles Groups for Particle Swarm Optimization , 2014 .
[17] Guanglei Wu,et al. Comparison of 3-DOF asymmetrical spherical parallel manipulators with respect to motion/force transmission and stiffness , 2016 .
[18] Wen Yi Lin,et al. A GA–DE hybrid evolutionary algorithm for path synthesis of four-bar linkage , 2010 .
[19] Selçuk Erkaya,et al. Optimization of transmission angle for slider-crank mechanism with joint clearances , 2009 .
[20] Saeed Ebrahimi,et al. Efficient constrained synthesis of path generating four-bar mechanisms based on the heuristic optimization algorithms , 2015 .
[21] Dong Liang,et al. Optimum design of a novel redundantly actuated parallel manipulator with multiple actuation modes for high kinematic and dynamic performance , 2016 .
[22] Sanjib Kumar Acharyya,et al. Performance of EAs for four-bar linkage synthesis , 2009 .
[23] G. R. Gogate,et al. Optimum synthesis of path generating four-bar mechanisms using differential evolution and a modified error function , 2012 .
[24] H. M. Daniali,et al. Reducing the undesirable effects of joints clearance on the behavior of the planar 3-RRR parallel manipulators , 2016 .
[25] TaeWon Seo,et al. A new design methodology for four-bar linkage mechanisms based on derivations of coupler curve , 2016 .
[26] Carlos Alberto Cruz Villar,et al. Synthesis of Spherical 4R Mechanism for Path Generation using Differential Evolution , 2011, ArXiv.
[27] L. Romdhane,et al. A combined genetic algorithm-fuzzy logic method (GA-FL) in mechanisms synthesis , 2004 .
[28] Vincenzo Parenti-Castelli,et al. Dimensional synthesis of the optimal RSSR mechanism for a set of variable design parameters , 2017 .
[29] G. R. Gogate. Inverse kinematic and dynamic analysis of planar path generating adjustable mechanism , 2016 .
[30] J. A. Cabrera,et al. Multiobjective constrained optimal synthesis of planar mechanisms using a new evolutionary algorithm , 2007 .
[31] Stéphane Caro,et al. A three-step methodology for dimensional tolerance synthesis of parallel manipulators , 2016 .
[32] Antonio Pérez González,et al. Open-path synthesis of linkages through geometrical adaptation , 2004 .
[33] S. Erkaya,et al. Determining link parameters using genetic algorithm in mechanisms with joint clearance , 2009 .
[34] F. Freudenstein. Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .
[35] J. Chu,et al. Variable step-size numerical atlas method for path generation of spherical four-bar crank-slider mechanism , 2015 .
[36] Selçuk Erkaya,et al. A neural–genetic (NN–GA) approach for optimising mechanisms having joints with clearance , 2008 .
[37] Seyed Mohammad Mirjalili,et al. Optical buffer performance enhancement using Particle Swarm Optimization in Ring-Shape-Hole Photonic Crystal Waveguide , 2013 .
[38] Ali Jamali,et al. Pareto optimal synthesis of four-bar mechanisms for path generation , 2009 .
[39] David E. Goldberg,et al. Genetic Algorithms in Search Optimization and Machine Learning , 1988 .