Stiction and anti-stiction in MEMS and NEMS

Stiction in microelectromechanical systems (MEMS) has been a major failure mode ever since the advent of surface micromachining in the 80s of the last century due to large surfacearea-to-volume ratio. Even now when solutions to this problem are emerging, such as self-assembled monolayer (SAM) and other measures, stiction remains one of the most catastrophic failure modes in MEMS. A review is presented in this paper on stiction and anti-stiction in MEMS and nanoelectromechanical systems (NEMS). First, some new experimental observations of stiction in radio frequency (RF) MEMS switch and micromachined accelerometers are presented. Second, some criteria for stiction of microstructures in MEMS and NEMS due to surface forces (such as capillary, electrostatic, van der Waals, Casimir forces, etc.) are reviewed. The influence of surface roughness and environmental conditions (relative humidity and temperature) on stiction are also discussed. As hydrophobic films, the self-assembled monolayers (SAMs) turn out able to prevent release-related stiction effectively. The anti-stiction of SAMs in MEMS is reviewed in the last part.

[1]  David Tabor,et al.  The effect of surface roughness on the adhesion of elastic solids , 1975, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2]  J. Israelachvili.  Intermolecular and surface forces , 1985 .

[3]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments , 1993 .

[4]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[5]  C. Mastrangelo.  Adhesion-related failure mechanisms in micromechanical devices , 1997 .

[6]  R. Howe,et al.  Alkyltrichlorosilane-based self-assembled monolayer films for stiction reduction in silicon micromachines , 1998 .

[7]  G. J. Maclay,et al.  The role of the casimir effect in the static deflection and stiction of membrane strips in microelectromechanical systems (MEMS) , 1998 .

[8]  R. Maboudian.  Surface processes in MEMS technology , 1998 .

[9]  Z. Rymuza.  Control tribological and mechanical properties of MEMS surfaces. Part 1: critical review , 1999 .

[10]  Terry A. Michalske,et al.  Accurate method for determining adhesion of cantilever beams , 1999 .

[11]  B. Sernelius,et al.  Fractional van der Waals interaction between thin metallic films , 2000 .

[12]  T. Michalske,et al.  Adhesion hysteresis of silane coated microcantilevers , 2000 .

[13]  Bharat Bhushan,et al.  Thin-film friction and adhesion studies using atomic force microscopy , 2000 .

[14]  R. Maboudian,et al.  Self-assembled monolayers as anti-stiction coatings for MEMS: characteristics and recent developments , 2000 .

[15]  Ya-Pu Zhao,et al.  Failure Modes of MEMS and Microscale Adhesive Contact Theory , 2000 .

[16]  T. Chung,et al.  A new organic modifier for anti-stiction , 2001 .

[17]  M. Roukes,et al.  Stiction, adhesion energy, and the Casimir effect in micromechanical systems , 2001 .

[18]  R. Maboudian,et al.  Dichlorodimethylsilane as an anti-stiction monolayer for MEMS: a comparison to the octadecyltrichlorosilane self-assembled monolayer , 2001 .

[19]  Roger T. Howe,et al.  Alkene Based Monolayer Films As Anti Stiction Coatings For Polysilicon MEMS , 2001 .

[20]  U. Mohideen,et al.  New developments in the Casimir effect , 2001, quant-ph/0106045.

[21]  H. Kuisma,et al.  Effect of alkylsilane coating on sliding wear of silica-silicon contacts with small amplitude motion , 2002 .

[22]  Morphological stability of epitaxial thin elastic films by van der Waals force , 2002 .

[23]  T. Xu,et al.  Friction and Wear Studies of Octadecyltrichlorosilane SAM on Silicon , 2002 .

[24]  R. Maboudian,et al.  Tribological Challenges in Micromechanical Systems , 2013 .

[25]  Morphology correlation to the superhydrophobicity in an organic thin film on rough Al , 2002 .

[26]  Li-Xian Zhang,,et al.  Failure Modes of Doubly Supported Capacitive RF MEMS Switches , 2002 .

[27]  Preparation And Tribology Studies of Alkyl Carboxylic Acid Monolayer Films on Pei-Coated Glass Substrate , 2002 .

[28]  Jung-Mu Kim,et al.  Continuous anti-stiction coatings using self-assembled monolayers for gold microstructures , 2002 .

[29]  M. Parameswaran,et al.  Theoretical limits on the freestanding length of cantilevers produced by surface micromachining technology , 2002 .

[30]  Surface stability of epitaxial elastic films by the Casimir force , 2002 .